APPAREL

Replacement visor for the LS2 FF900 Valiant II.

The Oxford 3M Earsoft FX Earplugs are constructed from a slow-expanding environmentally friendly polyurethane foam material that is soft and comfortable in your ears. The earplugs offer SNR 39dB, the highest protection you can get from an earplug.

Features:

• Protective pocket case,
• Designed to provide the ultimate in comfort and protection,
• Made from a slow expanding environmentally friendly polyurethane foam material,
• Evenly distributed pressure gives flexibility, a good seal and optimum comfort,
• EC Directive 89/686/EEC
• Earsoft offers the highest protection you can get from a plug - SNR 39dB,
• PVC-free
• Quantity: 25 pairs

Replacement buckle set for Leatt 5.5 boots.

Connects jeans to a motorcycle jacket, to prevent an uncomfortable gap from forming between the two when riding.

Features:

• Compatible with all Oxford motorcycle jackets.
• Top-quality YKK zip.
• Elasticated section allows for movement on the bike without discomfort.
• Unobtrusive design - can simply be left on your belt when not in use.
• Made using genuine leather.

How to use:

• Take your favourite belt and start to thread it through the belt loops in your riding jeans (or trousers).
• As you reach the centre point at the back of your jeans, pass the belt through the Oxford Belt Connector as shown here.
• Next, pass the belt through the centre belt loop of your jeans before passing back through the Oxford Belt connector on the other side.
• Continue to pass the belt through the rest of the jean loops until the belt fastens at the front. The Oxford Belt Connector should remain secured at the rear.
• Finally, zip to your favourite Oxford Jacket... and that's it, you're good to go! No more pesky jacket riding up!

Replacement peak for LS2 Coz Hyde helmets.

Genuine visor for the LS2 OF616 helmet.

Genuine LS2 Max Vision pinlock for FF811 helmets.

Pinlock lens has become the benchmark for fog-resistant performance that is most commonly used by riders worldwide. Max Vision® technology provides a clear view throughout the complete eye port of the shield. Pinlock insert can be used in cold weather or in humid conditions to guarantee your visor without any misting. The insert is made of a moisture-absorbing plastic and therefore the surface is basically dry when used. The insert has a silicone seal that creates an air tight double visor. Max Vision Pinlock is easy to fit - placed between two visor pins - and is interchangeable, making it easy to remove when the weather changes or for visor cleaning. Visor pins are adjustable, allowing to tighten or loosen tension of the Pinlock insert for a precise fit.

Features:

• Max Vision® technology provides a clear view throughout the complete eye port of the shield.
• Silicone seal creates an airtight chamber offering enhanced fog-resistant properties.
• Made of moisture- absorbing plastic material.
• Easy to clean and to apply; fully removable and interchangeable with other Pinlock lenses.
• Genuine Pinlock® product.

Good vision is essential for motorcycling, but as we age, many of us struggle with reading close-up details, like your instrument panel, speedo, or GPS, while still seeing clearly ahead. With constantly changing speed zones, that can be frustrating and even risky.

These riding glasses offer a smart solution: they feature integrated bifocal lenses in strengths of +1.5, +2.0, and +2.5. You look ahead through the non-magnified upper lens, and when you glance down at your instruments, the lower bifocal section brings them into sharp focus. Simple and effective.

Features:

• Lightweight, flexible frames.
• Flat temples (arms) that fit comfortably under your helmet.
• Three lens options: Smoke, Clear, and Yellow.
• Foam dust seal to protect against fine dust, pollen, and other irritants.
• Made from durable polycarbonate.
• Rated Medium Impact, with UV400 protection.
• Meets ANSI/ISEA Z87.1/2010 and AS/NZS 1337 safety standards.

Oxford Ear Plugs as used and recommended by MotoGP star Bradley Smith.

Features:

• Each pack includes 2 pairs of high-quality earplugs that are shaped for maximum comfort.
• This giant 100-pack box is perfect for your workshop or any other high- volume environment.
• Colour-coded to prevent accidental ear plug sharing.

Dynamic and ultra-flexible and lightweight protectors, ideal for casually-styled motorcycle garments.

Features:

• CE Level 2 (EN 1621-1:2012)
• Ultra lightweight.
• Ultra flexible.
• Slim profile - only 9.3mm thick.
• Ventilated.
• Adaptive impact absorption.
• Multi impact compliant PU-foam.

Genuine LS2 Max Vision pinlock for FF324 Metro helmets.

Pinlock lens has become the benchmark for fog-resistant performance that is most commonly used by riders worldwide. Max Vision® technology provides a clear view throughout the complete eye port of the shield. Pinlock insert can be used in cold weather or in humid conditions to guarantee your visor without any misting. The insert is made of a moisture-absorbing plastic and therefore the surface is basically dry when used. The insert has a silicone seal that creates an air tight double visor. Max Vision Pinlock is easy to fit - placed between two visor pins - and is interchangeable, making it easy to remove when the weather changes or for visor cleaning. Visor pins are adjustable, allowing to tighten or loosen tension of the Pinlock insert for a precise fit.

Features:

• Max Vision® technology provides a clear view throughout the complete eye port of the shield.
• Silicone seal creates an airtight chamber offering enhanced fog-resistant properties.
• Made of moisture-absorbing plastic material.
• Easy to clean and to apply; fully removable and interchangeable with other Pinlock lenses.
• Genuine Pinlock® product.

Fed up with your trousers falling down? Do belts aggravate you while riding? Then look no further than the Oxford Riggers Braces! A great help in keeping your trousers up while both on and off your bike. With a comfortable design, sturdy design and adjustable length.

Features:

• Anti-snag nylon teeth protects clothing
• Extra strong clips
• Adjustable size - 400-790 mm length
• Quality 50mm wide elastic for comfort
• Material: 80% Elastic, 15% Metal and 5% PU

Genuine replacement visor for the LS2 FF807 Dragon and FF817 Challenger II helmet.

Features:

• Anti-scratch and UV-resistant.
• Easy visor locking and quick-release system.
• Pinlock-ready.

Genuine replacement visor for the LS2 FF808 helmet.

Replacement Visor to suit OF562 Helmets.

• Colour: Clear
• Style: Long

Replacement sun visor system for LS2 MX702 helmets.

LS2 visors are built with 3D Optically Correct "A Class" Polycarbonate, a space-age polymer with high resistance to impact, that avoids distortion and offers maximum clarity.

Features:

• Twin Shield System
• Quick Release System
• Scratch Resistant
• UV Resistant
• Fog Resistant
• Pinlock Max Vision Ready