Fork Tools

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

Wrench for removing front fork cap
Made of durable steel
Closed end for easy operation
Size: 24/32/41mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

The Whites Seal Bolt Removal Tool is designed to remove the SHOWA SFF air fork bottom sealing bolt.

The Whites Damper Rod Fork Tool is the perfect tool for assembling and disassembling most 41, 43, 46 and 47mm Kayaba and Showa inverted forks. Dual-sided with one side designed for Kayaba and the other for Showa forks. Constructed from hardened steel for strength and durability with a black oxide finish for corrosion resistance.

Compatible with Showa and Kayaba forks
Suitable for most 41, 43, 46 and 47mm inverted forks
Hardened steel construction for strength and durability
Black oxide finish for corrosion resistance
T-handle for easy operation

If your compression clicker on your Kayaba or Showa forks are impossible to reach with a screwdriver the Whites Fork Compression Damper Adjustment Tool is perfect for you. The adjusting tool is flat with a tip on the bottom, it easily fits between the fork cap and handlebar while the knurled edge enables quick and easy adjustment. Don't struggle any longer, this fork compression adjustment tool allows for quick and easy tuning of the compression clicker with its slimline design.

Simplifies fork compression adjustment
Knurled edge provides grip for turning the adjuster
Slimline design fits between handlebar and fork cap
Tip on bottom turns the compression clicker
No need to remove handlebars to adjust suspension settings

The fork tube tool is used for assembling and disassembling fork tubes from the fork bottoms, while the cartridge rod holding plate is perfect for disassembly and assembly of KYB/Showa Twin Chamber and most street cartridge forks. Designed to hold back the spring allowing you to loosen or tighten the bottom nut or fork cap on cartridge forks.

For assembling/disassembling forks tubes from the bottom
Compatible with KYB/Showa Twin Chamber forks
Also compatible with most street cartridge forks
Holds back spring allowing loosening/tightening of the bottom nut/fork cap

The Whites Fork Damper Rod Holder is the ideal tool to hold damper rod when disassbling and assembling the front forks. It provides a secure method of holding the inner damper rod while removing the bolt from the bottom of the fork leg. Compatible with damper rods sized 15-25mm and constructed with a 1/2" square socket drive for use with a ratchet, bar or torque wrench.

Holds damper rod when assembling/disassembling forks
Compatible with rods sized 15-25mm
1/2" square socket drive for use with bar or torque wrench

The Whites Damping Rod Bleed Tool allows the damping rod to be retrieved effortlessly after sping installation. Compatible with Kayaba, Showa and WP inverted forks and constructed with a covered bleed port to prevent oil splatter. Including a zinc plated rod with knurled handle for corrosion resistance and additional grip and four brass hex adaptors for a wide range of application.

Knurled rod provides additional grip
Rod is zinc plated for corrosion resistance
Brass hex adaptors
Compatible with Kayaba, Showa and WP inverted forks
Allows effortless retrieval of damping rod after spring installation
Adaptor sizes: M10x1.0, M12x1.0, M12x1.25 and M14x1.0

The Whites 4in1 Fork Bleed Tool is a simple and economical workshop tool to simplify cartridge fork servicing. Built with four thread pitches from M10x1.0 to M12x1.25 allowing you to service almost any common street fork. The tool enables you to bleed the air out of the cartridge ensuring accurate fork oil levels.

Simplifies cartridge fork servicing
Lightweight aluminium construction
Anodised red for easy identification
Bleeds air from cartridge ensuring accurate fork oil levels
Thread pitches: M10x1.0, M10x1.25, M12x1.0 and M12x1.25

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

Wrench for removing front fork cap
Made of durable steel
Closed end for easy operation
Size: 46/50mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

Wrench for removing front fork cap
Made of durable steel
Closed end for easy operation
Size: 49/50mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 54mm

Available in sizes 32mm-54mm.

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 45mm

Available in sizes 32mm-54mm.

Designed specifically for removing the fork cap on 50mm Showa forks. An essential tool for Kawasaki, Suzuki and Honda owners, making fork oil changes a breeze. Made with a slot for holding the damper rod when removing the rebound bolt, allowing removal of the cartridge from the lower fork leg.

Wrench for removing front fork cap
Made of durable steel
The essential tool for Kawasaki, Suzuki and Honda owners
Specifically made for Showa 50mm forks
Size: 50mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 46/47mm

Available in sizes 32mm-54mm.

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 43mm

Available in sizes 32mm-54mm.

The Whites Fork Internals Tool is used to open the inner fork of KTM 50/65's. Necessary when replacing or servicing the fork springs.

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

Wrench for removing front fork cap
Made of durable steel
Closed end for easy operation
Size: 48mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

The Whites Cartridge Rod Holding Plate is perfect for disassembly and assembly of KYB/Showa twin-chamber and most street cartridge forks. The tool is designed to hold back the fork spring allowing you to loosen and tighten the bottom nut or fork cap on 10mm to 12.5mm cartridge rods, simplifying fork maintenance and servicing.

Holds back fork spring
Use when removing/installing the bottom nut or fork cap
Compatible with 10mm to 12.5mm cartridge forks
Simplifies fork maintenance and servicing
Suitable for KYB/Showa twin-chamber and most street cartridge forks

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 37mm

Available in sizes 32mm-54mm.

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

Wrench for removing front fork cap
Made of durable steel
Closed end for easy operation
Size: 45/50mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

The Whites Fork Damper Rod Holder is the ideal tool to hold damper rod when disassbling and assembling the front forks. It provides a secure method of holding the inner damper rod while removing the bolt from the bottom of the fork leg. Compatible with damper rods sized 15-25mm and constructed with a 1/2" square socket drive for use with a ratchet, bar or torque wrench.

Holds damper rod when assembling/disassembling forks
Compatible with rods sized 15-25mm
1/2" square socket drive for use with bar or torque wrench

The Whies Fork Cap Socket is used for removal and installation of the fork cap nut (1-3/8" hex) on most big twin and sportster models. Constructed with an o-ring insert design that allows you to remove/install the fork cap without the risk of damaging the fork cap. An inbuilt 1/2" square socket drive enables the use of a torque wrench for tightening to the manufacturers recommended specification, eliminating the risk of under or over tightening and stripping the thread.

For 1-3/8" fork caps commonly found on big twins and sportsters
O-ring insert prevents damaging the fork cap
1/2" socket drive for accurate torquing during installation

An ideal tool for removing those soft alloy fork tube top caps without damage, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

For removing front fork cap
Made of durable steel
Prevents damage to aluminium fork caps
Size: 17mm

Fork seal head tool for Big Piston forks

The Whites BPF Fork Seal Head Tool holds fork cartridges for dissassembly, assembly and removal of the cartridge seal head from the tube. The tool enables you to change the fork springs without valve disassembly on 41mm and 43mm big piston forks, decreasing the time it takes and simplifying servicing big piston forks.

Holds fork cartridges for disassembly, assembly and removal of cartridge seal head from the tube
It helps you to change fork springs without valve disassembly
Compatible with 41mm and 43mm big piston forks

Dimensions:

Top: 33mm A/F (hex)

Bottom: 35mm A/F (hex)

Internal: 18mm

The Whites Fork Oil Level Tool is the perfect tool for checking and adjusting the internal fork oil volume on all conventional and single chamber cartridge forks. The aluminium measuring tube features laser-etched measuring marks from 0-300mm in 5mm increments. The included syringe has a 60ml capacity for adding or removing fork oil to ensure a balanced height in both forks, improving handling and rider confidence.

Compatible with all conventional and single chamber cartridge forks
Aluminium measuring tube indicates height from 0-300mm in 5mm increments
60ml capacity syringe for adding or removing oil
Adjustable locking ring sets collar height
Ensures precise oil heights in forks
Also compatible with bicycles with front suspension

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 32mm

Available in sizes 32mm-54mm.

The Whites Damper Rod Locking Tool is designed to lock the damper rod on hydraulic forks when dismantling hydraulic fork systems. This tool has a crosshead point diameter of 14mm-17mm and a total length of 600mm.

Damper rod locking tools for hydraulic forks
To help with dismantling hydraulic forks systems
14mm-17mm cross head point diameter
600mm length

Please see TMD46101 for 5mm-13mm cross head point damper rod locking tool.

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 39mm

Available in sizes 32mm-54mm.

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods. Available in this 9pc kit that includes most fork sizes, the perfect kit for the suspension tech's workshop.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
9pc kit includes most fork sizes

Sizes Included:
35/36mm
39mm
41mm
43mm
45mm
46/47mm
48mm
49/50mm
54mm

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 49/50mm

Available in sizes 32mm-54mm.