Grips

	__ __
Description	Description - __
Vendor	Vendor - __
	View full details

Oxford

Oxford Touring Grips (Pair) Med

$21.99

In stock

Oxford

Oxford HotGrips® - Replacement Dark Chrome Cap for 697 Hotgrip

$7.99

Low in stock

Oxford

Oxford V9 Evo HotGrips® Thumb Warmer (Temperature Controlled)

$69.93 $99.90

-30%

In stock

Oxford

Oxford Hot Grips V8 Heat Controller Replacement Switch

$99.99

In stock

Oxford HotGrips® Premium Cruiser (1inch Bar) with V8 Switch

Oxford

Oxford HotGrips® Premium Cruiser (1inch Bar) with V8 Switch

$179.99

In stock

Oxford

Oxford V9 Evo HotGrips® ATV Right Replacement Grip

$73.43 $104.90

-30%

Low in stock

Oxford

Oxford Original Oxford HotGrips® Replacement - Right Grip

$38.43 $54.90

-30%

In stock

Oxford

Oxford HotGrips Wrap – Advanced Heated Overgrips

$159.99

In stock

Oxford

Oxford HotGrips® Adventure Spare Left-hand Grip

$64.99

In stock

Oxford

Oxford Hotgrips Advanced Adventure 9-Stage

$189.90

In stock

Oxford HotGrips® ATV Essential with High/Low Switch

Oxford

Oxford HotGrips® ATV Essential with High/Low Switch

$149.99

In stock

Oxford

Oxford Hotgrips Advanced Touring 9-Stage

$189.90

In stock

Oxford

Oxford Cruiser HotGrips® Replacement Throttle Grip (without Cap)

$79.99

In stock

Oxford

Oxford V9 Evo HotGrips® Touring Right Replacement Grip - 7ohms

$104.90

In stock

Oxford EVO HotGrips® Sports - V9 Thermister Switch

Oxford

Oxford EVO HotGrips® Sports - V9 Thermister Switch

$279.90

In stock

Oxford

Oxford Cruiser Replacement Switch

$69.99 $99.99

-30%

In stock

Oxford

Oxford HotGrips Pro 2.0 Sport (Integrated)

$349.99

The next evolution of HotGrips® Pro.

In response to customer feedback, Oxford added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves.

Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected setting before dimming - to reduce distraction whilst driving.

Each grip houses its own internal temperature control unit, which independently measures and controls the heat of each grip using built- in thermistors to maintain the desired temperature setting.

Manufactured from silicone, this incredible material increases the grip‘s lifespan by up to 200% without compromising comfort or performance, as well as delivering cable strain improvement and enhanced grip levels.

Features:

HotGrips® Pro 2.0 Sport specific
- Grip guaranteed - Knurling tread pattern creates the largest surface area for maximum of grip and control.
- Customisable grips - Grip length of 125mm, but can be trimmed to 120, 115mm if required, with open ends allowing bar end weights can be fitted.
5 smart heat settings: Red 55°C, Purple 50°C, Green 45°C, White 40°C, Blue 35°C
The thermistor reacts to temperature changes in the environment and adjusts the heat output accordingly, maintaining the selected temperature setting.
Integrated controller
- The built-in controller allows the rider to effortlessly control the temperature of their Hotgrips® Pro without removing their hand from the grip.
- Multi-coloured LED displays the chosen temperature setting and dims to avoid any distraction.
Intelligent heat setting memory
- The intelligent heat setting memory function stores the previous heat setting and defaults to this at power-up, saving time when in regular use.
Battery saving modes
- Protects against flat batteries, so if you forget to turn the switch off it will do it for you!
- HotGrips® Pro offers an additional battery-saving mode for lithium batteries, now common on high-performance motorcycles.
Waterproof construction
- Fully waterproof connectors and integrated controller meet IP65 rating to protect your HotGrips® from the elements.
Grip Features
- Silicone-formed grips - increase grip lifespan by up to 200% without compromising comfort or performance.
- Integrated cable strain relief - a more compact cable exit enables grip size to be reduced.
- Fits 7/8" (22mm) ∅ handlebars.

In stock

Oxford HotGrips Pro Touring Left Replacement Grip (Integrated)

Oxford

Oxford HotGrips Pro Touring Left Replacement Grip (Integrated)

$309.99

Low in stock

Oxford

Oxford Fat Grips 33mm X 119mm

$19.90

In stock

Oxford HotGrips® Premium ATV with V8 Switch

Oxford

Oxford HotGrips® Premium ATV with V8 Switch

$199.99

The Oxford Premium Hotgrips are the latest in a thirty-year quest to find the best solution for warm hands in the worst conditions. These grips focus specifically on ATVs and are therefore suitable for quads. Besides these ATV types, other models focus on different types of riding preferences: touring, sports, retro, adventure, and cruiser.

In addition to being nice and warm, the ATV grips are equipped with an ergonomic surface consisting of different structures. Comfort, feel, grip and control are all there, which is important on an adventure quad or all-terrain vehicle. Wear resistance and good vibration-absorbing qualities make these grips a very good choice, even without their built-in heating capability. Each grip is 130 mm long, with an open end to allow for installing handlebar weights or handguards. The length is easily trimmed, down to 121 mm, should you feel the need. The grips will fit all handlebar diameters up to 22 mm. Power consumption is less than 4 A per pair.

A weatherproof controller, to be mounted on your handlebars, allows for easy control and monitoring of the heat setting. You can see at a glance which of the five settings you are currently using. Should you forget to turn if off after your ride - while in a rush to get inside, where it's warm - the Hotgrips Premium will do it for you, thanks to the Battery Saving Mode. There's no need to install a power-saving relay either, as this handlebar heater only switches on when there's enough power and energy to do so. That normally means: when the engine is running.

Mounting and installing the Premium Hotgrips is easy. Just connect the cable to the battery and smoothly slide the grips onto the handlebars. Everything you need for this - including the metal bracket for the controller - is included as standard.

It goes without saying that you should read through the instruction booklet first, and that having heated grips doesn't mean you can ride without your protective gloves.

Dimensions:

Width: 5 cm
Height: 4.7 cm
Thickness: 1.2 cm

In stock

Oxford

Oxford Sports HotGrips® Replacement Left-hand Grip

$64.99

In stock

Oxford V9 Evo HotGrips® Wiring Loom (ATV)

Oxford

Oxford V9 Evo HotGrips® Wiring Loom (ATV)

$26.53 $37.90

-30%

In stock

Oxford HotGrips Pro Adventure Left Replacement Grip (Integrated)

Oxford

Oxford HotGrips Pro Adventure Left Replacement Grip (Integrated)

$309.99

Low in stock

Oxford

Oxford HotGrips Pro 2.0 Adventure (Integrated)

$349.99

The next evolution of HotGrips® Pro.

In response to customer feedback, Oxford added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves.

Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected setting before dimming - to reduce distraction whilst driving.

Each grip houses its own internal temperature control unit, which independently measures and controls the heat of each grip using built- in thermistors to maintain the desired temperature setting.

Manufactured from silicone, this incredible material increases the grip‘s lifespan by up to 200% without compromising comfort or performance, as well as delivering cable strain improvement and enhanced grip levels.

Features:

HotGrips® Pro 2.0 Adventure specific
- Grip guaranteed - hex tread pattern for vibration absorption and durability; knurling tread pattern creates the largest surface area for maximum grip and control; gripper bars for tough terrain where grip is more important for control and stability.
- Customisable grips - Grip length of 132mm but can be trimmed to 123, 120 or 117mm if required, with open ends allowing bar end weights can be fitted.
5 smart heat settings: Red 55°C, Purple 50°C, Green 45°C, White 40°C, Blue 35°C
The thermistor reacts to temperature changes in the environment and adjusts the heat output accordingly, maintaining the selected temperature setting.
Integrated controller
- The built-in controller allows the rider to effortlessly control the temperature of their Hotgrips® Pro without removing their hand from the grip.
- Multi-coloured LED displays the chosen temperature setting and dims to avoid any distraction.
Intelligent heat setting memory
- The intelligent heat setting memory function stores the previous heat setting and defaults to this at power-up, saving time when in regular use.
Battery saving modes
- Protects against flat batteries, so if you forget to turn the switch off it will do it for you!
- HotGrips® Pro offers an additional battery-saving mode for lithium batteries, now common on high-performance motorcycles.
Waterproof construction
- Fully waterproof connectors and integrated controller meet IP65 rating to protect your HotGrips® from the elements.
Grip Features
- Silicone-formed grips - increase grip lifespan by up to 200% without compromising comfort or performance.
- Integrated cable strain relief - a more compact cable exit enables grip size to be reduced.
- Fits 7/8" (22mm) ∅ handlebars.