HARD PARTS

The Foghorn is a 12v black motorcycle horn. It has a loud 105db horn and has a low tone electromagnetic 400 mhZ.

Features:

• Waterproof and corrosion proof construction.
• Universal mounting bracket, will fit most motorcycles and scooters.

Replace your indicators with this bespoke design.

Features:

• Matte black finish case.
• 15 LED bulb.
• Highly waterproof.
• E-marked (fully road legal).
• Pair of indicators + a pair of resistors included.
• Size: 74mm(L) x 29mm(W) x 18mm(H)

A standard bulb from Whites' comprehensive range of electrical bulbs.

Includes:

• 6v
• 12v
• Instrument
• Capless
• Flasher
• Stop-tail
• Pre-focus
• Halogen headlamp.
  
  

A standard bulb from Whites' comprehensive range of electrical bulbs.

Includes:

• 6v
• 12v
• Instrument
• Capless
• Flasher
• Stop-tail
• Pre-focus
• Halogen headlamp.
  
  

DENALI Universal Crashbar / Engine Guard Mount

Our unique 4-point clamp with pivoting mounting bracket guarantees a perfect fit on crashbars and engine guards. Two sizes fit bars from 7/8 in to 1.5 in diameter. Compatible with all DENALI lights.

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

Put the spark back in your ride with a Whites Electrical Coil. Manufactured as a direct OEM replacement while meeting or exceeding OEM specifications, it will mount with ease and outperform that worn out coil. Whites Ignition Coil's are the perfect cost-effective alternative to OEM ignition coils, with a vast range of applications available.

Features:

• Cost-effective OEM alternative.
• OEM replacement.
• Manufactured to meet or exceed OEM specifications.
• Diverse applications.
• Voltage: 12V
• Primary (ohm): 2.58 ohm
• Secondary (ohm): 10.5k ohm
• Holes Centres: 80mm

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

Forerunner Mars

The new Mars should be your number one choice when looking for an ATV tyre that feels right at home on soft ground or sand. Utilizing a versatile claw pattern, this tyre is full of grip!

Ply: 8 Ply
Load Rating: 550 lbs / 250 kgs 60F
Weight: 8.4 kgs

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Made of high-quality vulcanized rubber.
• Fits as well as OEM.
• Three to four times the life than OEM.

A standard bulb from Whites' comprehensive range of electrical bulbs.

Includes:

• 6v
• 12v
• Instrument
• Capless
• Flasher
• Stop-tail
• Pre-focus
• Halogen headlamp.
  
  

Even the most thrilling rides can come to an unexpected halt with a flat tyre. That's when Whites Puncture repair kit comes to the rescue, ensuring you're always prepared to conquer the open road.

For tubeless tyres.

Includes:

• Seals
• C02
• Tools
• Glue
• Kit bag

A short section of Nitromousse that increases the PSI feel and extend the lifetime of your Nitro Mousse. Available for multiple sizes of Platinum and Soft Nitro Mousse.

The Whites 12mm Foot Pegs are OEM replacement footpegs for many Suzuki and other brands/model bikes. Constructed with an aluminium body for strength and corrosion resistance and a rubber ribbed outer to prevent your feet from slipping when riding. Designed with a folding hinge so they can be retracted when not in use and a 10mm x 1.25mm mounting bolt and lock nut for easy installation.

• High-quality rubber prevents splitting
• Foldable for when not in use
• Aluminium body and end cap
• Corrosion resistant
• Quick and easy installation
• Thread size: 10mm x 1.25mm
• Outer diameter: 36mm
• Length of peg rubber: 72mm
• Total length: 100mm
• Total length including stud: 130mm
• Length of stud: 30mm

Permanently connect a charger or electrical accessory to a battery with this 0.5m cable.

Features:

• Colour-coded ring terminal makes connection simple.
• Connector: USA/SAE (EL105) or Standard (OF703).
• Suitable for 6mm bolts.
• Cable connector comes with a weatherproof cap.
• Weather-resistant fuse holder.
• 0.5m cable length.
• Suitable for up to 5 amps.
• Unpackaged.

DENALI D2 Auxiliary LED Light Kit for Motorcycles, ATVs, UTVs, Snowmobiles, Jeeps and Trucks

The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. Don’t be fooled by their smaller size; the installed spot lenses throw a beam of light 525 feet down the road, while the included flood lenses create a beam that is 165 feet wide and carry an official E-Mark certification.

DENALI’s innovative DataDim™ Technology enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DNL.WHS.11000) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

Features

• Comprehensive 9 piece LED light kit specifically designed for powersports applications
• High-Intensity Series Cree LEDs outputting 2190 lumens per kit
• TriOptic™ Multi-Beam Lens System includes a Spot, Flood and Hybrid beam option in one kit
• DataDim™ equipped light pods and harness allow plug-n-play connection to the DataDim™ dimming controller
• Premium powersports harness with waterproof switch and handlebar switch mount included
• DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

Specs

• LED’s: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep (each)
• Pod Weight: 0.6 lbs (each)
• IP67 Waterproof & Submersible

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Constructed using spring steel material with a thick chrome plating the Whites Exhausts Clamps combine functionality with style. Simple and easy to fit with an included cross bolt which is made from zinc plated steel. Both the adjusting bolt and clamp are corrosion resistant to avoid the clamp seizing over time. Ideal for securing the motorcycles exhaust downpipes, headers, and mufflers.

Thick chrome plating
Spring steel construction
Zinc plated steel adjusting bolt
Simple and easy installation
Perfect for securing downpipes, headers and muffler

Clamp diameter: 48mm (1-7/8")
Colour finish: Chrome

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Brake shoes 

Constructed from high-quality steel the Whites Kick Start levers are the perfect cost-effective OEM replacement part. If your current lever is worn and loose on the spline have it replaced before it damaged the spline resulting in a costly repair.

OEM replacement
Built to meet or exceed OEM specifications
Cost-effective alternative to OEM parts

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

NB: Please confirm suitability for your year, make, model prior to purchase.

Protective heat cover designed for specific Harley Davidson model applications where battery is located very close to engine.

Key features:

• Protects Motobatt MBTX20U (standard) and MBTX20UHD (black/orange) batteries from engine heat.
  
  
• Designed for low-profile, snug fit around battery, without interfering with terminals.

Whites OEM replacement air filters are manufactured to meet or exceed OEM specifications. Constructed to fit the factory air box and are direct replacements to OEM air filters. The premium filtering media prevents dirt and dust entering your engine while maintaining excellent air flow. Whites Air Filters are designed for high-performance engines requiring great airflow and filtration.

Features:

• OEM replacement air filter.
• Meets or exceeds OEM specifications.
• Fits factory air box.
• Excellent airflow.
• Premium filtration.

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

Put the spark back in your ride with a Whites Electrical Coil. Manufactured as a direct OEM replacement while meeting or exceeding OEM specifications, it will mount with ease and outperform that worn-out coil. Whites Ignition Coil's are the perfect cost-effective alternative to OEM ignition coils, with a vast range of applications available.

Cost-effective OEM alternative
OEM replacement
Manufactured to meet or exceed OEM specifications
Diverse applications

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

High-quality ignition cover gasket kit.

Features:

• High performance Interface Microspore gasket material is utilized where applicable.
• Hand-selected gasket material that out performs OEM material on imperfect surfaces.
• Meets or exceeds OEM quality.

Whites have you sorted for custom cable applications with the range ofInner/Outer Cable Bowden and Cable End Caps, available in three different sizes and both unlined and nylon lined outer Bowden. All cable Bowden is available in a 25ft roll and caps available in 10 packs perfect for workshop use.

The Whites Nylon Lined Outer Cable Bowden is perfect for your home or business workshop. Available in a 25ft roll this cable Bowden will last for many jobs to come, perfect for routing your own custom length cables or replacing cables on your classic machine that no longer has OEM parts available. Manufactured for strength and durability with an additional nylon lining for exceptional abrasion resistance and low friction for less resistance and easy operation. Whites Hardware is Japanese made and matches Original Equipment quality.

Nylon lined for smoother operation
Ideal for custom cables
Diameter: 6mm
Length: 25ft

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.