ELECTRICAL

The Foghorn is a 12v black motorcycle horn. It has a loud 105db horn and has a low tone electromagnetic 400 mhZ.

Features:

• Waterproof and corrosion proof construction.
• Universal mounting bracket, will fit most motorcycles and scooters.

Replace your indicators with this bespoke design.

Features:

• Matte black finish case.
• 15 LED bulb.
• Highly waterproof.
• E-marked (fully road legal).
• Pair of indicators + a pair of resistors included.
• Size: 74mm(L) x 29mm(W) x 18mm(H)

DENALI Universal Crashbar / Engine Guard Mount

Our unique 4-point clamp with pivoting mounting bracket guarantees a perfect fit on crashbars and engine guards. Two sizes fit bars from 7/8 in to 1.5 in diameter. Compatible with all DENALI lights.

Put the spark back in your ride with a Whites Electrical Coil. Manufactured as a direct OEM replacement while meeting or exceeding OEM specifications, it will mount with ease and outperform that worn out coil. Whites Ignition Coil's are the perfect cost-effective alternative to OEM ignition coils, with a vast range of applications available.

Features:

• Cost-effective OEM alternative.
• OEM replacement.
• Manufactured to meet or exceed OEM specifications.
• Diverse applications.
• Voltage: 12V
• Primary (ohm): 2.58 ohm
• Secondary (ohm): 10.5k ohm
• Holes Centres: 80mm

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

DENALI D2 Auxiliary LED Light Kit for Motorcycles, ATVs, UTVs, Snowmobiles, Jeeps and Trucks

The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. Don’t be fooled by their smaller size; the installed spot lenses throw a beam of light 525 feet down the road, while the included flood lenses create a beam that is 165 feet wide and carry an official E-Mark certification.

DENALI’s innovative DataDim™ Technology enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DNL.WHS.11000) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

Features

• Comprehensive 9 piece LED light kit specifically designed for powersports applications
• High-Intensity Series Cree LEDs outputting 2190 lumens per kit
• TriOptic™ Multi-Beam Lens System includes a Spot, Flood and Hybrid beam option in one kit
• DataDim™ equipped light pods and harness allow plug-n-play connection to the DataDim™ dimming controller
• Premium powersports harness with waterproof switch and handlebar switch mount included
• DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

Specs

• LED’s: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep (each)
• Pod Weight: 0.6 lbs (each)
• IP67 Waterproof & Submersible

Protective heat cover designed for specific Harley Davidson model applications where battery is located very close to engine.

Key features:

• Protects Motobatt MBTX20U (standard) and MBTX20UHD (black/orange) batteries from engine heat.
  
  
• Designed for low-profile, snug fit around battery, without interfering with terminals.

Put the spark back in your ride with a Whites Electrical Coil. Manufactured as a direct OEM replacement while meeting or exceeding OEM specifications, it will mount with ease and outperform that worn-out coil. Whites Ignition Coil's are the perfect cost-effective alternative to OEM ignition coils, with a vast range of applications available.

Cost-effective OEM alternative
OEM replacement
Manufactured to meet or exceed OEM specifications
Diverse applications

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

High-quality ignition cover gasket kit.

Features:

• High performance Interface Microspore gasket material is utilized where applicable.
• Hand-selected gasket material that out performs OEM material on imperfect surfaces.
• Meets or exceeds OEM quality.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Brand new external ignition coil.

Features:

• Direct replacement of your original unit.
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials.
• Spark plug cap(s) included.
• All products shipped are tested.

Specifications:

• Width: 34 mm
• Length: 45 mm
• Height: 70 mm
• Wires length: 450 mm / 210 mm
• Fixation holes centre to centre: 56 mm
• Primary Resistance: 5.0k ohms
• Secondary Resistance: 0.8 ohms

*The image shown is for illustrative purposes only. Actual product colour may vary. Depending on availability and model, the item may be supplied in blue or black. Product specifications and quality remain the same regardless of colour. If in doubt, do not hesitate to compare our item to your original part.

Denali's Soundbomb Horn Bundle is the ultimate safety upgrade to help you be heard and be seen. Our 120 decibel air horns are 4 times louder than a stock 100 decibel disc horn! The kit includes a SoudBomb Air Horn, a vehicle-specific horn mount, a horn wiring harness, and any additional wiring needed to guarantee an effortless plug-and-play installation.

Bundle Contents:

• (1x) SoundBomb™ Split Dual-Tone Air Horn
• (1x) Horn Mount - BMW R1200GS and R1250 GS/GSA
• (1x) Universal Wiring Harness for SoundBomb Horns - 5.5ft

Note: Product bundles ship complete in a white box and will only show in stock if all components are available. All bundle components are also available for individual sale.

Reliable, high-torque starting power to get your engine running smoothly every time.

This vehicle-specific split horn mount allows you to mount the DENALI SoundBomb Split Dual-Tone Air Hor in the optimum location on your BMW R 1250 GS/GSA. This kit includes one powder-coated steel bracket to mount the horn compressor behind the cylinder head and a second bracket to mount the horn acoustic unit centered under the fairing stay.

This split horn mount was designed to ensure that the horn components can only be installed in one specific orientation, eliminating the possibility of installing them incorrectly and maximising suspension clearance. The two M8 mounting points and indexing tab on the acoustic unit bracket ensure that the horn can not rotate once installed.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

DENALI Motorcycle Specific Fairing / Fender Mounts

Available for most ADV, Cruisers and Sport Touring Models Laser cut and powder coated steel brackets either position the lights in the optimum location just below to the outside of the headlight, or create a two-point fender mount strong enough to mount our largest lights to your fender.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

This D4 Waterproofing Gasket is an replacement for the lens gasket of a D4 light pod.

What’s In The Box?

• (x1) D4 Waterproofing Gasket

Brand new aftermarket Voltage Regulator Rectifier

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• No assembly required
• The quality exceeds the OEM equipment
• All products shipped are tested

Specifications:

Dimensions:

Other specifications:

• Number of plugs: 2
• Number of wires: 2
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

Note: Battery condition is important. No regulator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Whites 12v Rocker ON & OFF Switch

Features:

• Durable Waterproof Design
• 7/8" Aluminium Handlebar Mount Included
• Backlit for any weather condition

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs.

• Ignition cover gasket
• Designed to fit O.E.M. cover

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

RMSTATOR specialises in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

Features:

• Direct replacement to your original unit.
• Plug-and-play, direct fit, easy installation.
• Highest grade of lamination materials.
• All products shipped are tested.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.