BATTERY

Permanently connect a charger or electrical accessory to a battery with this 0.5m cable.

Features:

• Colour-coded ring terminal makes connection simple.
• Connector: USA/SAE (EL105) or Standard (OF703).
• Suitable for 6mm bolts.
• Cable connector comes with a weatherproof cap.
• Weather-resistant fuse holder.
• 0.5m cable length.
• Suitable for up to 5 amps.
• Unpackaged.

Protective heat cover designed for specific Harley Davidson model applications where battery is located very close to engine.

Key features:

• Protects Motobatt MBTX20U (standard) and MBTX20UHD (black/orange) batteries from engine heat.
  
  
• Designed for low-profile, snug fit around battery, without interfering with terminals.

Quickly connect four electronic devices to your motorcycle without having to search for a suitable switched live feed each time. There's no need to attach multiple ring leads to your battery as this device manages them for you.

Features:

• 12V fused power junction box with relay.
• LED power status.
• Ignition shut off.
• 4 x 5Amp connection ports.
• Compact design.
• Can be used with Auxiliary Lights, HotGrips® and much more.

Oxford permanent battery connector fits the battery and allows an Oxford charger to be connected without having to remove the seat.

The cable connector comes with a weatherproof cap.

The Oximiser 900 is an essential battery management system designed specifically for smaller batteries such as those used on motorcycles and ATVs.

Attach to your battery and it will charge until the battery has reached full capacity thereafter ensure it is kept in tip-top condition. If the battery is deeply discharged it will recover it with a varying charge rate and then it never drops below the critical voltage level of 12.6V. The digital displays and battery level indicators keep you informed every step of the way. They are suitable for a variety of vehicle batteries.

A professional switch mode charger designed to automatically maintain, optimise and prolong the life of a 12-volt battery. It can be left permanently connected to provide guaranteed long-term battery care. Heavily discharged batteries as low as 4.1V can be charged if the battery is not damaged.

Features:

• Easy-to-read LCD display.
• Quick check battery level indicator.
• Shows charging activity.
• Provides up to 900mA charging power.
• Battery voltage meter.
• Checks for correct polarity.
• Ideal for batteries up to 30Ah capacity including AGM, MF, and all lead acid types.

6 Stage battery management system

• Polarity check:
  • Checks the battery leads have been connected correctly.
• Battery Analysis:
  • Assesses battery and determines the best charging method.
• Bulk Fast Charge:
  • Charges at a fast rate to bring the battery to approximately 85% capacity.
• Absorption Charge:
  • Lowers the charge rate and gives a topping charge to ensure the battery is charged to 100%.
• Voltage Check:
  • Hourly voltage checks assess battery health.
• Maintain Mode:
  • Automatically applies an appropriate charge if voltage drops outside acceptable limits to ensure the battery voltage and condition remain perfect.

Accessories included in box

• M6 fused leads for permanent connection and has a weather-resistant cap.
• A set of crocodile clips for bench charging.
• A wall bracket.

The Motobatt MB-MINI PRO Tester provides an easy and simple way to test 12 Volt lead-acid batteries from 40 to 500 CCA on and off the vehicle. Analyze whether your battery's life, cranking, and charging systems are good or bad within a few milliseconds accurately.

Features:

• Large easy-to-read LCD display.
• Test your 12-volt lead-acid batteries easily.
• Tests 40 - 500 CCA.
• Battery life analysis.
• Test batteries on and off the vehicle.
• Never discharges or drains the battery.
• Test your vehicle cranking system (cranking time, voltage, and status).
• Test your vehicle charging system (load voltage, unloaded voltage, ripple status, and charging time).

Note: Motobatt MB-Mini Pro tester cannot test lithium batteries.

Specifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.

Motobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance-free, non-hazardous, non-spill, charged and ready to install directly out of the box.

Each plate in the battery is wrapped in a fibrous glass matting which not only absorbs all liquid electrolytes but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can break down the plate and cause short circuits between the plates or break plate welds which results in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.

AGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.

Your Motobatt is a Factory Activated battery, it comes to you pre-conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.

Specifications:

• Voltage: 12V
• C(10) Ah: 35
• C(20) Ah: 37.1
• CCA (Cold Cranking Amps): 420A
• MCA (Marine Cranking Amps): 523A
• PHCA (Pulse Hot Cranking Amps): 710A
• Weight: 10.5kg (23.16lbs)
• Dimensions (LxWxH): 195 x 130 x 179mm (7.67 x 5.16 x 7.13)
• Terminals: 2, 16x16 (Threaded Flag)
• Screws: 2, M8x20 (MPS2)
• Allen Wrench: NA
• Terminal Caps: NA
• Spacer: None

Features:

• Patented QuadFlex multi-fit terminals.
• Absorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle.
• Fully sealed – Can be mounted and transported in any position.
• No initial charging – Install and go, charged right out of the box.
• Maintenance Free – No messy acid to worry about.
• 20% more cold cranking amps (CCA).
• Easy accessory connection with multiple terminals.

22cm long phone lead with Lightning, USB C and Micro USB connectors. Will fit most late-model iPhone and Samsung phones.

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 900 charges 6 and 12V WET/MF batteries at a maximum charge rate of 800mA (0.8Amps). The intelligent 7-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated – suitable for indoor and outdoor use.
• 7-stage automatic charging: polarity test, analyse, soft start mode, bulk mode, absorption mode, voltage check, and maintain mode (float voltage).
• AH Capacity: 3.5AH - 20AH
• Compatible with 6V and 12V WET/MF batteries.
• Maximum output: 800mA
• LCD display provides clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for improved ventilation around the Oximiser casing.
• Waterproof cable exit with strain relief.
• Winter-grade cable.
• Removable hanger: clip-in and turn to hold securely in place.

Don't leave home without this powerful and high-quality lithium Jump pack from Motobatt. Featuring quality plug connections to high- voltage clamp leads, ultra-reliable and sound connections.

1000A peak current will have your Vehicle or Motorcycle starting in seconds. This little beauty is a must-have for the trail or the road. It can be charged from a standard USB power outlet.

Features:

• Jump Start - 12V Vehicles (motorcycle or car).
• 5V/2.4A USB Output - Charges smartphones, tablets and more.
• LED Flashlight - 3 modes:
• Illumination
• Strobe
• SOS
• Built-in protection - For overcharging and over-discharging.
• Charge indicator - Quickly view charge levels.
• Automatic power On/Off - When not in use.
• Copper jumper clamps.
• Pump up your Tires - Built-in Air Compressor

Specification:

• Start Current: 500A.
• Peak Current: 1000A.
• Battery Capacity: 10000mAh.
• Dimensions: 245 x 100 x 46mm.
• Weight: 880g.
• Input: 5V/2A
• Output: 5V/2.4A x2 (device), 12V (vehicle jump start).
• Operation temperature: -20c to 60c
• Full charging time: 6 hours

Includes:

• 1x Jump Starter – Jump Starter / Personal Power Supply Unit
• 1x Built-in Air Compressor – With detachable Air Line
• 1x 3-into-1 USB Cable – Type-C, Micro USB, Lightning
• 1x Mini Jumper Clamps – Plugs into Micro-start for Jump Starting
• 1x USB-A to USB-C Charging Cable
• 1x Hard Case

About Motobatt

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.

Motobatt MB-BCT Battery Capacity Tester 12V

Tests AGM, GEL, EFB, OPSV, Lead Acid, Hybrid and Lithium Batteries

• A simple and accurate way to test battery performance in almost any chemistry
• Full discharge test confirms battery run time
• Powers up from the battery being tested
• Croc Clip connectors direct to the terminal, easy!
• Very portable take right to the machine to test

The Motobatt MB-BCT was developed to assist battery specialists and dealers check the performance of the battery in almost any vehicle so long as the battery is no smaller than 10AH and no larger than 200AH. An excellent tool to find favour or fault in batteries that does not require a PhD to operate or interpret. It contains a fully automatic program based on the operators selection of the chemistry involved. To test a battery connect up the leads and press start button. The programme will test the battery at 10% of its rated capacity for either 10 or 20 hours (user selectable) or until it reaches the set voltage (user selectable). A report can be printed showing the performance of the battery in run time.

Motobatt Pro Lithium batteries are around 3x lighter than conventional lead- acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.

Specifications:

• Capacity: 4.5 Ah
• CA: 115
• Box quantity: 10
• Size: (LxWxH) 114 x 70x 87, 114 x 70x 107 (EVA 2), 114 x 70x 127 (EVA 2)
• Quadflex: MBTZ7S, MBTX7U
• Replaces:
  • YTX5L-BS, YTZ6S, YTZ7S
  • YTX7L-BS, YTZ8V

Features:

• Over-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.
• Over-discharge protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.
• Cell balancing

Cell Balancing Circuit (CBC)

Motobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.

Each Motobatt Lithium battery contains a unique CBC which always controls the charge/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.

Due to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.

*Aggressive and repeat discharging may affect capacity and rechargeability

Protection Circuit Board (PCB)

Exclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.

Note:

• Motobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.
• Motobatt Pro Lithium batteries are high- performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.
• Motobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.

The easy-to-read battery charger uses an M6 ring connector to connect to the Lead acid battery. A traffic light system allows the user to easily tell if the battery is healthy or requires charging. The SAE connector then allows through charging, reducing the need for another permanent battery charger cable on the battery.

Supplied with 3 different fuses to work with every charger in the Oximiser Pro range (7.5A / 4A / 2A). Made from high-quality 18AWG cable.

Features:

• Allows the health of a battery to be determined with an easy-to-read traffic light system:
  • Green / STRONG = >12.6V
  • Yellow / CHARGE = 12.2V - 12.6V
  • Red / WEAK = <12.2V
• Flashes every 5 seconds to reduce power consumption.
• Can be used in conjunction with Oximiser Pro optimiser range, using the supplied micro blade fuses:
  • 900/1250 = 2A
  • 2000 = 4.0A
  • 5000 = 7.5A
• Connects to SAE connectors.
• Dimensions: 0.5m length, 18AWG cabling.
• To be used with 12V Lead Acid batteries (not Lithium).

Quality 18AWG wire battery Ring Terminal Harness used to fit many battery chargers including MotoBatt, Battery Tender, Battery Minder, Schumacher, Schauer, Yuasa, Pulsetech, Ozcharge.

Features:

• 53cm (21") 18AWG Cables with 7.5A Fuse.
• Suits 6mm ring terminals.
• Attach direct to any powersport battery.
• Suitable for all Motobatt Chargers.
• Suits also many other branded chargers.
• Plug right in when vehicle is not in use.
• 2 DIN Plug end with dustcap.

Take your bike to the next level with the new Motobatt Pro Lithium! Super compact and powerful, this battery delivers instant starting performance while shedding weight compared to traditional lead-acid options. Built with advanced lithium technology, it offers longer life, faster charging, and consistent power delivery. Perfect for riders who demand reliability and performance, the Motobatt Pro Lithium keeps you riding stronger, longer.

Features:

• Integrated LED indicator shows voltage and charge percentage in real time.
• High power with Cell Balancing Circuit (CBC) and Protection Circuit Board (PCB).
• Ultra-lightweight design for maximum performance.
• Ideal for racing and high-performance motorcycles.

Specifications:

• Capacity (Ah): 4.0Ah
• Cranking (CA): 320A
• Energy (Wh): 48.0Wh

Motobatt Deep Cycle Batteries offer the largest amp-hours capacity per case size in the industry today. AGM Maintenance Free valve regulated (VLRA) construction makes Motobatt the definitive choice for the discerning buyer.

Commonly used for backup power supplies such as UPS and is suitable for many brands of Chinese portable generators in Australia.

Other applications include fire and emergency backup power supply, CCTV, access control, alarm security systems, DC power supply, auto control systems and portable power devices.

Features:

• Suitable for many brands of Chinese portable generators in Australia
• High-purity lead calcium alloy grids.
• Thicker full-frame plates.
• Handmade for exceptional Quality Control Process.
• Proprietary Paste formulation for heavy-duty performance.
• Low-resistance microporous glass matt separators.
• Faster charge acceptance C10 Rated.
• Longer Cycle Life with Extreme durability.

Specifications:

• Battery Type: MB12120NB AGM Factory Activated
• Voltage: 12
• Capacity (10HR): 12AH
• Internal Resistance: 19 Ohms
• Weight: 3.64kg / 8 lbs
• Dimensions (in / mm): L: 5.94 (151) W: 3.86 (98) H: 3.74 (95)
• Assembly Figure Terminal Locations: 2, +/-
• Terminals: 2, Nut and Bolt with Stainless Hardware

Application:

Extremely clean and able to be charged without the danger of spillages and heavy gassing our batteries are perfect for inside charging and usage. With Motobatts' unique construction techniques, we have been able to develop industry-leading reserve power capable of multiple charge cycles. Fast-ion Tab attachment terminals for solar, automotive, industrial or marine.

Motobatt batteries come with a 1 Year full replacement warranty on mechanical failure.

Supporting fast charging through both Type-A and Type-C ports, the Slimlime USB is ideal for powering mobile phones and satnavs. A splash-resistant silicone cap protects the ports, keeping your electronics safe and dry when not in use.

Designed for compact mounting alongside motorcycle switchgear, the kit offers a clean, OEM+ appearance. An in-line fuse safeguards your devices from potential power surges, ensuring reliable and safe operation.

Features:

• Max 5V, 3A output.
• Water-resistant cap.
• Fits 22-25?mm handlebars.
• Dual USB output.
• 1.8m cable.
• 0.5mA back drain current when not in use.
• Device-specific charging cable not included.

As modern UTV’s are improving every year, it is increasingly common to add accessories to them like stereos, lights, and winches. These are great upgrades, until you are stuck with a dead battery and can’t start the engine! RMSTATOR comes to the rescue with the best and most complete kit available to add a second battery to your UTV to power your accessories and monitor the charge of both batteries right from your dashboard!

The addition of a second battery to your vehicle to power your accessories allows you to safely use them all day without discharging your primary starting battery. If the voltage drops too low on your second battery, it will disconnect and isolate it from the main battery safely and automatically. When the motor is started, the secondary battery will be reconnected and recharged.

The included LED dual voltmeter installs on your dashboard, and lets you easily monitor the voltage of both batteries. The included wiring harness and relay allow the voltmeter to turn on and off with your keyswitch.

Everything you need for a complete installation is included!

Includes:

• Dual battery isolator relay

• 12” Black ground battery cable with terminal lugs

• 12” Red positive battery cable with terminal lugs

• 18” Red positive battery cable with terminal lugs

• Dual Red LED voltmeter (1.4” OD x 1” depth)

• Keyswitch voltmeter activation relay with socket and wires

• 96” wire harness for dual voltmeter connection to relay

• Terminals and connectors

All Balls Battery Isolator with Wire Kit.

• Automatically isolates secondary auxiliary battery from primary battery for running accessories
• Prevents primary battery from draining when vehicle is stopped while maintaining a charge in both batteries when vehicle is running
• Kit includes battery isolator module, wiring kit, mounting hardware

Included Items:

(1) Battery isolator module

(2) 2" Long screws

(2) 1/2" Long screws

(5) Cable ties

(1) Blue ring terminal

(5) Silver lug connectors

(2) Clear shrink tubes

(1) 13-1/2" Black cable

(1) 14" Red cable

(1) 26" Red cable

Charger Cable Quick Disconnect Lead 53cm 18AWG Car Lighter & BMW CBUS Adaptor Plug. Use to connect and extend the length of any Motobatt 1, 2 or 4 bank charger.

Attach directly to any Motobatt Charger Plug or accessory
Connects to BMW Cbus Socket
Universal 2 Pin DIN Plug
Flex Fit Plug
Plug right in when the vehicle is not in use

Seamlessly integrate your choice of USB charger with your motorcycle. Mount your charging port somewhere convenient using the included 3M™ sticky pad then simply run the attached ring leads directly to your battery terminals.

Once the charging point is neatly positioned and cables hidden away, the charging port provides up to 3 Amps of power, perfect for mobile devices. Your phone or device is then protected from any potential surge in power thanks to the in-line fuse.

The charger draws zero current when not in use so there is no danger of draining your battery and the included splash-resistant silicone cap will also ensure there's no water ingress during the worst of the weather.

USB Type A female connector charging kit with splash-resistant cap*.

Key Features

• 5V output
• 1.6m lead
• 3 Amp USB output
• 12-24V battery powered
• Easy installation - 3M™ pad

* Device-specific charging cable not included.

Oxford crocodile clips accessory lead adapter allows an Oxford charger to be connected to a set of crocodile clips for attachment to a battery.

Got an electronic device like a spot light with a male lighter attachment? Want to run it off your bike but don’t have a female lighter fitting? Not any more, just connect this fitting to any SAE battery lead and you're ready to go!

No soldering or splicing your wiring harness, simply plug it straight into any SAE battery lead. When you’re done, unplug this fitting and plug one of our charger cables in and charge your phone or tablet.

If you have a 12V accessory with a standard cigarette lighter plug and you want to power it from a jump starter battery, this is the lead. Plug the EC5 plug into the corresponding EC5 port on your Jump Starter and plug your accessory plug into the lighter socket.

NOTE: Compatible with jump starter batteries using EC5 socket only.

Motobatt Pro Lithium HP Series battery offers complete overcharging, over- discharging, temperature protection and cell balancing capability, to provide maximum performance, protection and safety to the battery.

Features:

• Dynamic Cell Balancer: Optimizes each cell voltage to maximum.
• Over-Charge Protection: Prevents the machine or charger from overcharging the battery; cut off at 15.4V.
• Under Discharge Protection: Prevents the battery from being overdischarged to premature failure; Cut off at 8V
• Thermal Protection.: Temperature sensor shuts down before dangerous temperatures can occur; Cut off at 75°C
• Reactivation: Can be reactivated from shutdown with Motobatt PDCFB Charger or any charger that starts from 0 volts.
• Performance: Designed for performance rides. 

Specifications: 

• Battery Type: MLX20UHD-HP Pro Lithium Lifepo4
• Voltage: 13.2V
• Capacity: 12A
• CCA: 720
• Weight: 3.06Lbs (1.39KG)
• Dimensions (in / mm):
  • L: 6.89 (175)
  • W: 3.43 (87)
  • H: 6.10 (155)
  • TW: 3.94 (100)
  • TH: 6.89 (175)
• Assembly Figure Terminal Locations: 4
• Terminals: 4, Fixed HD Compatible
• Screws: 2, M6X10 (Part#2xMPS3)
• Spacers:
  • 1x 175x87x20 mm Height Spacer Pt (EVA7)
  • 1x 170x115x15 mm Width Spacer Pt (EVA8)

Kit includes:

1x MOTOBATT LOW VOLTAGE ALARM (SKU: MBZTLVBA)
1x MOTOBATT CHARGER CABLE LEAD (SKU: MBZCCRT)

See individual component descriptions below.

MOTOBATT LOW VOLTAGE ALARM (NEED MBZCCRT LEAD 18AWG)

Connects Easily by way of 2 Pin Din Plug. Mount direct to your ring terminal harness or battery using compatible MOTOBATT CHARGER CABLE LEAD with matching 2 din plug and ring terminals (SKU: MBZCCRT).

Application:

• Use on any Lead Acid 12V Battery.
• Starts to Alert when battery voltage drops below 12.2 Volts with a loud beeping sound.
• Particularly good for monitoring Showroom bikes to ensure charge is kept up to date.
• Save money on replacing abused batteries
• Use on Bikes, Cars, Boats, Mowers, Jetskis, Snowmobiles and anywhere else you have a battery!

MOTOBATT CHARGER CABLE LEAD 18AWG 53CM RING TERM 6mm  (SKU: MBZCCRT)

Quality 18AWG wire battery Ring Terminal Harness used to fit many battery chargers including MotoBatt, Battery Tender, Battery Minder, Schumacher, Schauer, Yuasa, Pulsetech, Ozcharge.

Features:

• 53cm (21") 18AWG Cables with 7.5A Fuse.
• Suits 6mm ring terminals.
• Attach direct to any powersport battery.
• Suitable for all Motobatt Chargers.
• Suits also many other branded chargers.
• Plug right in when vehicle is not in use.
• 2 DIN Plug end with dustcap

The Rocky Creek RC-2000 is ideal for charging and maintaining all your 12V and 6V lead-acid batteries.

After it has fully charged a battery, the unit automatically switches to maintenance mode. This charger can charge and maintain batteries with a capacity from 2 to 60 Amp-hours. It emits a consistent 2A and includes safeguards such as reverse polarity protection, short circuit protection and overcharging prevention.

Press the mode button to change between 6V and 12V battery charging. The unit executes an 8-step charging cycle, an LED indicates when charging and when fully charged.

Features:

• Charges and maintains 6V and 12V lead-acid batteries.
• Suitable for battery capacities from 2 to 60Ah.
• Automatic switch to maintenance mode after full charge.
• Delivers a steady 2A output.
• -step charging cycle with LED status indicators.
• One-button switch between 6V and 12V modes.
• Built-in protections: reverse polarity, short circuit, and overcharging.