BATTERY

Connect a USB device to your Motobatt Battery with this cable, charge your phone, gps etc while you ride.

Features:

• Get power from 12V motorcycle battery.
• USB output 5V 2.1A max.
• Ideal for charging the smarth phone, Tablet PC and GPS from your motorcycle battery.
• User friendly connect the battery via SAE coannector.

Take your bike to the next level with the new Motobatt Pro Lithium! Super compact and powerful, this battery delivers instant starting performance while shedding weight compared to traditional lead-acid options. Built with advanced lithium technology, it offers longer life, faster charging, and consistent power delivery. Perfect for riders who demand reliability and performance, the Motobatt Pro Lithium keeps you riding stronger, longer.

Features:

• Integrated LED indicator shows voltage and charge percentage in real time.
• High power with Cell Balancing Circuit (CBC) and Protection Circuit Board (PCB).
• Ultra-lightweight design for maximum performance.
• Ideal for racing and high-performance motorcycles.

Specifications:

• LWH: 114x70x81.5mm
• Capacity (Ah): 4.0Ah
• Cranking (CA): 320A
• Energy (Wh): 48.0Wh

All Balls Long Universal Battery Cable - Black

This connector will enable you to run accessories like the MotoPressor Pocket Pump off a Mini Jump Starter. Plug the Blue plug (EC5) into your Mini Jump Starter and the other end into any accessory running an SAE connector like our MotoPressor Pocket Pump. You now have a means to connect and power any of your accessories from your Mini Jump Starter.

IMPORTANT - This lead is designed to run accessories like the Motopressor pocket pump. It is not designed to start your bike or car. Doing so is dangerous, will damage the lead and could cause damage to your bike or car. Use the crocodile clips supplied with your mini jump starter to start your bike or car.

Permanently connect a charger or electrical accessory to a battery with this 0.5m cable.

Key Features
• Colour-coded ring terminal makes connection simple
• Connector: USA/SAE (OXEL105) or Standard (OXOF703)
• Suitable for 6mm ? bolts
• Cable connector comes with a weatherproof cap
• Weather-resistant fuse holder
• 0.5m cable length
• Suitable for up to 5amps
• Bulk packed without retail packaging

Hardwire your charging solution to your bike battery. The two USB power ports offer 5V/2.1A per socket, and when powered on will display your battery voltage. The USB charging ports supply enough power to charge devices like phones, tablets, trackers, GPS, etc.

NOTE: The wire will come on when the ignition is turned on. We recommend installation by an auto electrician.

These cables will increase starter performance by reducing voltage losses from undersized cables.

• The outer jacket material is rated for 125 °C and is oil and gas-resistant.
• Meets or exceeds OEM specs for fit and performance.
• Cables will increase starter performance by reducing voltage losses from undersized cables.
• Cables are manufactured with pure electrolytic grade, 36 gauge copper wire strands.
• The 7 over 7 bundling of the copper strands maximizes current flow and the flexibility of the cable.
• The outer jacket material is rated for 125 °C and is oil and gas-resistant.

Motobatt Pro Lithium batteries are around 3x lighter than conventional lead- acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.

Specifications:

• Capacity: 2.2 Ah
• CA: 160
• Box quantity: 10
• Size: (LxWxH) 62 x 53 x 90

Features:

• Over-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.
• Cell balancing

Cell Balancing Circuit (CBC)

Motobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.

Each Motobatt Lithium battery contains a unique CBC which always controls the charge/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.

Due to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.

*Aggressive and repeat discharging may affect capacity and rechargeability

Protection Circuit Board (PCB)

Exclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.

Note:

• Motobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.
• Motobatt Pro Lithium batteries are high-performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.
• Motobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.

Motobatt Pro Lithium batteries are around 3x lighter than conventional lead- acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.

Specifications:

• Capacity: 10 Ah
• CA: 600
• Box quantity: 4
• Size: (LxWxH) 183 x 80 x 170
• Quadflex: MB51814
• Replaces: 51814, 51913, YT19BL-BS

Features:

• Over-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.
• Over-discharge protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.
• Cell balancing

Cell Balancing Circuit (CBC)

Motobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.

Each Motobatt Lithium battery contains a unique CBC which always controls the charge/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.

Due to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.

*Aggressive and repeat discharging may affect capacity and rechargeability

Protection Circuit Board (PCB)

Exclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.

Note:

• Motobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.
• Motobatt Pro Lithium batteries are high-performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.
• Motobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.

The Oximiser 3X is an advanced battery management system.

The Oximiser 3X is Oxford's most versatile, most powerful, multi-purpose maintenance product. It offers not one, but THREE automated charging programs for differing battery sizes - perfect for bikes, cars and even leisure batteries! So, if you have multiple toys in your garage, it's the only battery optimiser you are ever likely to need.

Features

• Completely redesigned and tested in the UK using top-quality long-life components.
• A 2-year warranty is included as standard.
• A soft-start charging mode to improve recovery of deeply discharged batteries as low as 8 volts.
• Intelligent charging will cycle-charge in an attempt to recover sulphated batteries.
• Suitable for all 12V automotive batteries including LITHIUM LiFePO4 motorcycle batteries.
• New voltage sensors quickly detect high current drain and will automatically revert to the most appropriate charge rate.
• Fast and efficient charging in all modes keeps charge times short and reduces main power consumption.
• Soft touch rubberised case for improved grip and ruggedness.
• Up to 3.6 Amps charging power for batteries up to 125Ah capacity.
• Induction cooling.
• Three charging mode power options.

Three Charging mode power options:

• Motorbike - 14.4V / 0.8A , for batteries under 36Ah including LiFePO4
• Car - 14.4V / 3.6A , a common charge rate for lead Acid, MF, GEL and LiFePO4 batteries
• Winter- 14.7V / 3.6A, suitable for AGM batteries including stop/start technology. Especially useful for charging batteries in freezing weather.

8-Stage Automatic Battery Management:

• Polarity Check
  • Checks the battery leads have been connected correctly.
• Battery Analysis
  • Assesses battery and determines the best charging method.
• Soft Start Charge
  • Controlled build-up of charge current ensuring discharged batteries are charged safely.
• Bulk Fast Charge
  • Charges at a fast rate to bring the battery to approximately 85% capacity.
• Absorption Charge
  • Lowers the charge rate and gives a topping charge to ensure the battery is charged to 100%.
• Voltage Check
  • Hourly voltage checks assess battery health.
• Battery Condition
  • LED lights indicate a weak or strong battery.
• Maintain Mode
  • Applies an appropriate charge if voltage drops outside acceptable limits to ensure the battery voltage and condition remain perfect.

Motobatt Pro Lithium HP Series battery offers complete overcharging, over- discharging, temperature protection and cell balancing capability, to provide maximum performance, protection and safety to the battery.

Motobatt Pro Lithium P Series battery only offers Overcharging, Temperature Protection and Cell Balancing capabilities.

• Overcharging Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.
• Over-discharging protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.
• Cell Balancing is vital to optimizing the battery's health. This function allows the voltage to be balanced in each cell, maximizing power, performance, and enhancing the battery's life span.

Motobatt Pro Lithium

• Safe – Stable lithium cell and protection (PCB)
• Powerful – Maximum cell power and best battery design
• Durable – Cell balancing circuit (CBC)
• Fitment – Light and original equipment fit

Specifications:

• Ah: 4
• CA: 320
• Box Quantity: 8

Spacer Sizes:

• 151 x 65 x 95
  • MB7U

Note:

Motobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve the best battery performance and longest life span.

Oxford 12v cigarette lighter accessory plug.

Key Features
• Plug in an SAE-powered accessory or charger without connecting directly to the battery.
• No need to remove the motorcycle seat to access the battery.
• Cable length: 0.5m (OXEL106) or 3.0m (OXOF704).
• Connector: USA/SAE (OXEL106) or Standard (OXOF704).
• Suitable for up to 5amps.

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.

Features:

• Waterproof, perfect for outdoors
• 9 Step Algorithm
• Automatic Charging & Maintaining
• Overcharge Protection
• Reverse Polarity Protection
• Short Circuit Protection
• Spark Proof
• Maintains Full Charge

Specifications:

• Application: 12V AGM, Lead-Acid, Calcium & Gel Batteries
• Input: Auto-switching 120-240VAC 50/60 Hz
• Input Cable: 6' 18AWG, U.S. SPT-2, EU-H03VV, Aust/NZ-H03VV
• Output: 12VDC 1A
• Max Charge Current: 1A
• Max Voltage: 14.8V
• Battery Capacity: 2-33Ah (Charging), up to 80Ah (Maintenance)

Motobatt chargers utilise Motobatt’s unique 9 Stage Charging and Maintenance Process.

Qualification Phase:

Initially ensures that the battery is in good condition prior to launching charge processing. As a safety measure charge process will not begin if the battery is below 2V.

Battery Rescue Phase:

Motobatt Battery Rescue starts if the battery voltage has risen unusually high in the early portion of the re-charge cycle. This is usually caused by plate sulfation. Once the battery rescue phase has succeeded in getting the battery to accept power, normal battery charging will begin.

Soft Start Phase:

Soft Start is used when the charger has detected a battery at a very low initial state of charge. Voltage and current are delivered at specified rates to help the battery to recover prior to entering Pulse charge mode.

Pulse Mode Phase:

Motobatt Pulse mode provides a high-frequency pulse charge to help the newly recovered battery to continue to accept charge as it enters the reconditioning phase.

Recondition Phase:

The Motobatt reconditioning phase continues to work the battery at a slightly higher voltage and amperage to “re-activate” the battery plates for improved depth of charge and charge acceptance.

Bulk Charge Phase:

With the battery now through Pulse and reconditioning phases and well on its way to full recovery the Motobatt bulk charge phase gives the battery constant current taking the battery up to 80% of its capacity.

Absorption Phase:

In the Motobatt absorption phase, the battery is given constant voltage while the current is reduced based on action taken from monitoring the batteries current state until the battery is 100% charged.

Check Phase:

The battery will now be checked to be sure that it is holding a charge properly and the charger will make a determination and classify the battery for use, or not.

Maintenance Phase:

The battery can be safely left on the charger indefinitely. The unit will monitor the battery and “turn-on” again as needed to maintain the battery at a full state of readiness.

Oxford 1.5m USA/SAE extension lead, suitable for up to 5amps.

The Oxford SAE to Oximiser Connecting Lead connects Oxford Oximiser Female connectors to standard SAE plugs.

Motobatt Pro Lithium HP Series battery offers complete overcharging, over- discharging, temperature protection and cell balancing capability, to provide maximum performance, protection and safety to the battery.

Motobatt Pro Lithium P Series battery only offers Overcharging, Temperature Protection and Cell Balancing capabilities.

• Overcharging Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.
• Over-discharging protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.
• Cell Balancing is vital to optimizing the battery's health. This function allows the voltage to be balanced in each cell, maximizing power, performance, and enhancing the battery's life span.

Motobatt Pro Lithium

• Safe – Stable lithium cell and protection (PCB)
• Powerful – Maximum cell power and best battery design
• Durable – Cell balancing circuit (CBC)
• Fitment – Light and original equipment fit

Specifications:

• Ah: 18
• CA: 800
• Box Quantity: 4

Spacer Sizes:

• 166 x 126 x 175

  • MBTX30U/HD

• 166 x 126 x 192

  • EVA 9
  • 165 x 125 x 17mm
  • MBTX30U/HD

Note:

Motobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve the best battery performance and longest life span.

Protective heat cover designed for specific Harley Davidson model applications where battery is located very close to engine.

Key features:

• Protects Motobatt MBTX30U (standard) and MBTX30UHD (black/orange) batteries from engine heat.
  
  
• Designed for low-profile, snug fit around battery, without interfering with terminals.

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. Attach the power lead to your battery, Red to (+) and Black to (-). Next, attach the corresponding wires to the back of the socket as marked on the back of the socket. The socket will handle 12V/120W.

NOTE: Before drilling any holes, ensure there is enough space behind the installation point to accommodate the body of the socket.

Specifications:

Voltage: 12V
CCA: 420
Capacity: 35Ah
Weight: 10.5kg (23.16lbs)
Dimensions (LxWxH): 195 x 130 x 179mm (7.67 x 5.16 x 7.13)
Terminals: 2, 16x16 (Threaded Flag)
Screws: 2, M6x7 (MPS2)
Allen Wrench: 1, 4x4 (MPAK2)
Terminal Caps: NA
Spacer: None

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.

Specifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a wider range of applications which enables stockists to carry a narrower range of batteries for a large market, which makes it easier for retail customers to find a battery to fit their vehicle, in stock.

Quadflex:

Motobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. QuadFlex provides a unique four-terminal design with two positives, two negatives along with height spacers that permit an almost universal fit. All Motobatt AGM Batteries are maintenance free, non-hazardous, non-spill, charged and ready to install directly out of the box.

Each plate in the battery is wrapped in a fiberous glass matting which not only absorbs all liquid electrolyte but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can breakdown the plate and cause short circuits between the plates or break plate welds which result in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.

AGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.

Your Motobatt is a Factory Activated battery, it comes to you pre-conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.

Features:

• Patented QuadFlex multi-fit terminals
• Absorbed Glass Mat technology – ensures greater protection against vibration and gives a longer lifecycle
• Fully sealed – Can be mounted and transported in any position
• No initial charging – Install and go, charged right out of the box
• Maintenance Free – No messy acid to worry about
• 20% more cold cranking amps (CCA)
• Easy accessory connection with multiple terminals

MOTOBATT BATTERIES ARE AVAILABLE VIA COURIER DELIVERY AS THEY CONTAIN NO LIQUID ACID!

The Fat Boy Charger is fully automatic and suitable for charging 12-volt bike batteries with capacities between 4Ah and 100Ah. The charger also acts as a maintainer and you can 'connect and forget' as the charger will keep the battery voltage topped up. The Fat Boy is also suitable for charging lithium batteries. There is also protection against short circuits, reverse polarity and thermal overload. Comes with crocodile clips and eyelet connectors. This charger is also wall mountable.

Features:

• Charges 12V Batteries and lithium batteries of 2Ah - 20Ah.
• Charges batteries of 4Ah - 100Ah.
• Trickle charges STD, GEL, AGM batteries of all sizes.
• Can charge WET, GEL, AGM, and lithium batteries.
• Canbus Compatible
• Automatic Charging and maintaining
• Overcharge Protection
• Reverse Polarity Protection (Lead-Acid only)
• Short Circuit Protection (Lead-Acid only)
• Spark-proof (Lead-Acid only)

Specifications:

• Application: 12V AGM, Lead-Acid and Lithium
• Input: Auto-switching 120-240VAC 50/60 Hz
• Input Cable: 6' 18AWG, U.S. SPT-2, EU-H03VV, Aust/NZ-H03VV
• Output: 12VDC 2A
• Max Charge Current: 2A
• Max Voltage: 14.9V (Lead-Acid), 14.6V (Lithium)
• Battery Capacity: 4-100Ah (Lead-Acid), 2-20Ah (Lithium)

This power adapter features dual 45W USB-C ports and an 18W QC3.0 USB port, as well as a voltmeter to display your battery's current state of charge.

An ON/OFF button enables you to switch the unit off when your not using your bike. The USB ports provide ample power to quickly charge all your devices, such as phones, tablets, and GPS units.

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 1250 charges a range of 6 and 12V batteries at a maximum charge rate of 1300mA (1.3Amps). The intelligent 8-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Compatible with WET/MF, AGM, GEL and LiFePO4 batteries, each charging program is tailored to the selected battery type. A desulfation stage repairs damaged batteries automatically during the charging profile, bringing them back to life (not LiFePO4).

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated - indoor and outdoor use.
• 8 stage automatic charging: polarity test, analyse, desulfation (12V WET/MF, AGM, GEL), soft start mode, bulk mode, absorption mode, voltage check, maintain mode (float voltage).
• AH Capacity: 3.5AH - 40AH.
• Compatible with: 6V and 12V WET/MF, AGM, GEL and 12V LiFePO4 batteries.
• Max output 1300mA.
• LCD display: clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for increased ventilation around the Oximiser casing.
• Waterproof cable exit with cable strain relief.
• Winter-grade cable.
• Removable hanger: easy to use, clip in and turn to hold the hanger in place.

Built with advanced Graphene Super Power Technology, these batteries are specifically designed for electric motorcycles, providing 20% more power and 30% longer lifespan. Engineered for high performance, they’re ideal for cold weather with exceptional reliability and durability.

Features:

• Graphene' Super Power.
• Super Power - 20% more power
• Longer lifecycle - 30% longer.
• Long Lasting in cold weather - 20% longer

Got an accessory socket on your bike and want to connect a device with an SAE fitting like a MotoPressor Pocket Pump? This clever adaptor comes with a male lighter fitting that will fit BOTH car and motorcycle lighter sockets.

To plug into a motorcycle-style (Hella) socket, simply remove the RED adaptor at the front of the plug and plug straight into the motorcycle socket. To plug into a car socket, leave the RED adaptor in. Now you can use your MotoPressor Pocket Pump on both your bike and car.

Motobatt Pro Lithium batteries are around 3x lighter than conventional lead- acid batteries, yet they produce even greater cranking performance ideal in competitive environments. This additional power translates into the ability to provide strong starting currents that are required for reliable, repeated starts at a wider range of temperatures than lead-acid batteries. Due to their very low idle discharge, Motobatt Pro Lithium batteries can retain charge after more than a year of inactivity. Pro Lithium batteries have a high life expectancy with over 2000 cycles compared to around 500 for a lead-acid battery, while also boasting a short recharge time, supplying up to 90% charge after.

Specifications:

• Capacity: 5 Ah
• CA: 350
• Box quantity: 8
• Size: (LxWxH) 114 x 70x 107, 114 x 70x 127
• Quadflex: MBTZ7S, MBTX7U
• Replaces:
  • YTX5L-BS, YTZ6S, YTZ7S
  • YTX7L-BS, YTZ8V

Features:

• Over-charge Protection is activated when the battery voltage reaches 15.6v or if any individual cells reach 3.90v. This is to protect the battery from overheating and overcharging.
• Over-discharge protection is activated when the battery voltage drops below 8.0v for longer than 7 seconds.
• Cell balancing

Cell Balancing Circuit (CBC)

Motobatt’s Cell Balancing Circuit or CBC for short gives their range of Pro Lithium batteries an edge over the competition. The dynamic cell balancing provides the ultimate in cell control giving superior performance, life span and safety.

Each Motobatt Lithium battery contains a unique CBC which always controls the charge/discharge of the cells, especially when experiencing unreliable current during use. Most other batteries only have their CBC in the charging system, this only provides proper control and balance when the unit is connected to a wall socket.

Due to the CBC technology, Motobatt Pro Lithium batteries can be recharged* when flat (below 10V) allowing them to last longer and provide more power to your motorcycle.

*Aggressive and repeat discharging may affect capacity and rechargeability

Protection Circuit Board (PCB)

Exclusive to Motobatt’s Pro Lithium HP-Series the Protection Circuit Board (PCB) technology makes Motobatt’s Pro Lithium batteries the safest on the market. PCB is designed to reduce the threat of thermal runaway and premature battery failure.

Note:

• Motobatt Pro Lithium batteries require different care and maintenance from standard lead-acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by using any other type of charger.
• Motobatt Pro Lithium batteries are high-performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.
• Motobatt recommends the use of Tech 1 or Fat Boy Chargers to maintain and achieve best battery performance and longest life span.