Battery Chargers

Permanently connect a charger or electrical accessory to a battery with this 0.5m cable.

Features:

• Colour-coded ring terminal makes connection simple.
• Connector: USA/SAE (EL105) or Standard (OF703).
• Suitable for 6mm bolts.
• Cable connector comes with a weatherproof cap.
• Weather-resistant fuse holder.
• 0.5m cable length.
• Suitable for up to 5 amps.
• Unpackaged.

Quickly connect four electronic devices to your motorcycle without having to search for a suitable switched live feed each time. There's no need to attach multiple ring leads to your battery as this device manages them for you.

Features:

• 12V fused power junction box with relay.
• LED power status.
• Ignition shut off.
• 4 x 5Amp connection ports.
• Compact design.
• Can be used with Auxiliary Lights, HotGrips® and much more.

Oxford permanent battery connector fits the battery and allows an Oxford charger to be connected without having to remove the seat.

The cable connector comes with a weatherproof cap.

The Oximiser 900 is an essential battery management system designed specifically for smaller batteries such as those used on motorcycles and ATVs.

Attach to your battery and it will charge until the battery has reached full capacity thereafter ensure it is kept in tip-top condition. If the battery is deeply discharged it will recover it with a varying charge rate and then it never drops below the critical voltage level of 12.6V. The digital displays and battery level indicators keep you informed every step of the way. They are suitable for a variety of vehicle batteries.

A professional switch mode charger designed to automatically maintain, optimise and prolong the life of a 12-volt battery. It can be left permanently connected to provide guaranteed long-term battery care. Heavily discharged batteries as low as 4.1V can be charged if the battery is not damaged.

Features:

• Easy-to-read LCD display.
• Quick check battery level indicator.
• Shows charging activity.
• Provides up to 900mA charging power.
• Battery voltage meter.
• Checks for correct polarity.
• Ideal for batteries up to 30Ah capacity including AGM, MF, and all lead acid types.

6 Stage battery management system

• Polarity check:
  • Checks the battery leads have been connected correctly.
• Battery Analysis:
  • Assesses battery and determines the best charging method.
• Bulk Fast Charge:
  • Charges at a fast rate to bring the battery to approximately 85% capacity.
• Absorption Charge:
  • Lowers the charge rate and gives a topping charge to ensure the battery is charged to 100%.
• Voltage Check:
  • Hourly voltage checks assess battery health.
• Maintain Mode:
  • Automatically applies an appropriate charge if voltage drops outside acceptable limits to ensure the battery voltage and condition remain perfect.

Accessories included in box

• M6 fused leads for permanent connection and has a weather-resistant cap.
• A set of crocodile clips for bench charging.
• A wall bracket.

The Motobatt MB-MINI PRO Tester provides an easy and simple way to test 12 Volt lead-acid batteries from 40 to 500 CCA on and off the vehicle. Analyze whether your battery's life, cranking, and charging systems are good or bad within a few milliseconds accurately.

Features:

• Large easy-to-read LCD display.
• Test your 12-volt lead-acid batteries easily.
• Tests 40 - 500 CCA.
• Battery life analysis.
• Test batteries on and off the vehicle.
• Never discharges or drains the battery.
• Test your vehicle cranking system (cranking time, voltage, and status).
• Test your vehicle charging system (load voltage, unloaded voltage, ripple status, and charging time).

Note: Motobatt MB-Mini Pro tester cannot test lithium batteries.

22cm long phone lead with Lightning, USB C and Micro USB connectors. Will fit most late-model iPhone and Samsung phones.

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 900 charges 6 and 12V WET/MF batteries at a maximum charge rate of 800mA (0.8Amps). The intelligent 7-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated – suitable for indoor and outdoor use.
• 7-stage automatic charging: polarity test, analyse, soft start mode, bulk mode, absorption mode, voltage check, and maintain mode (float voltage).
• AH Capacity: 3.5AH - 20AH
• Compatible with 6V and 12V WET/MF batteries.
• Maximum output: 800mA
• LCD display provides clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for improved ventilation around the Oximiser casing.
• Waterproof cable exit with strain relief.
• Winter-grade cable.
• Removable hanger: clip-in and turn to hold securely in place.

Don't leave home without this powerful and high-quality lithium Jump pack from Motobatt. Featuring quality plug connections to high- voltage clamp leads, ultra-reliable and sound connections.

1000A peak current will have your Vehicle or Motorcycle starting in seconds. This little beauty is a must-have for the trail or the road. It can be charged from a standard USB power outlet.

Features:

• Jump Start - 12V Vehicles (motorcycle or car).
• 5V/2.4A USB Output - Charges smartphones, tablets and more.
• LED Flashlight - 3 modes:
• Illumination
• Strobe
• SOS
• Built-in protection - For overcharging and over-discharging.
• Charge indicator - Quickly view charge levels.
• Automatic power On/Off - When not in use.
• Copper jumper clamps.
• Pump up your Tires - Built-in Air Compressor

Specification:

• Start Current: 500A.
• Peak Current: 1000A.
• Battery Capacity: 10000mAh.
• Dimensions: 245 x 100 x 46mm.
• Weight: 880g.
• Input: 5V/2A
• Output: 5V/2.4A x2 (device), 12V (vehicle jump start).
• Operation temperature: -20c to 60c
• Full charging time: 6 hours

Includes:

• 1x Jump Starter – Jump Starter / Personal Power Supply Unit
• 1x Built-in Air Compressor – With detachable Air Line
• 1x 3-into-1 USB Cable – Type-C, Micro USB, Lightning
• 1x Mini Jumper Clamps – Plugs into Micro-start for Jump Starting
• 1x USB-A to USB-C Charging Cable
• 1x Hard Case

About Motobatt

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.

Motobatt MB-BCT Battery Capacity Tester 12V

Tests AGM, GEL, EFB, OPSV, Lead Acid, Hybrid and Lithium Batteries

• A simple and accurate way to test battery performance in almost any chemistry
• Full discharge test confirms battery run time
• Powers up from the battery being tested
• Croc Clip connectors direct to the terminal, easy!
• Very portable take right to the machine to test

The Motobatt MB-BCT was developed to assist battery specialists and dealers check the performance of the battery in almost any vehicle so long as the battery is no smaller than 10AH and no larger than 200AH. An excellent tool to find favour or fault in batteries that does not require a PhD to operate or interpret. It contains a fully automatic program based on the operators selection of the chemistry involved. To test a battery connect up the leads and press start button. The programme will test the battery at 10% of its rated capacity for either 10 or 20 hours (user selectable) or until it reaches the set voltage (user selectable). A report can be printed showing the performance of the battery in run time.

The easy-to-read battery charger uses an M6 ring connector to connect to the Lead acid battery. A traffic light system allows the user to easily tell if the battery is healthy or requires charging. The SAE connector then allows through charging, reducing the need for another permanent battery charger cable on the battery.

Supplied with 3 different fuses to work with every charger in the Oximiser Pro range (7.5A / 4A / 2A). Made from high-quality 18AWG cable.

Features:

• Allows the health of a battery to be determined with an easy-to-read traffic light system:
  • Green / STRONG = >12.6V
  • Yellow / CHARGE = 12.2V - 12.6V
  • Red / WEAK = <12.2V
• Flashes every 5 seconds to reduce power consumption.
• Can be used in conjunction with Oximiser Pro optimiser range, using the supplied micro blade fuses:
  • 900/1250 = 2A
  • 2000 = 4.0A
  • 5000 = 7.5A
• Connects to SAE connectors.
• Dimensions: 0.5m length, 18AWG cabling.
• To be used with 12V Lead Acid batteries (not Lithium).

Quality 18AWG wire battery Ring Terminal Harness used to fit many battery chargers including MotoBatt, Battery Tender, Battery Minder, Schumacher, Schauer, Yuasa, Pulsetech, Ozcharge.

Features:

• 53cm (21") 18AWG Cables with 7.5A Fuse.
• Suits 6mm ring terminals.
• Attach direct to any powersport battery.
• Suitable for all Motobatt Chargers.
• Suits also many other branded chargers.
• Plug right in when vehicle is not in use.
• 2 DIN Plug end with dustcap.

Supporting fast charging through both Type-A and Type-C ports, the Slimlime USB is ideal for powering mobile phones and satnavs. A splash-resistant silicone cap protects the ports, keeping your electronics safe and dry when not in use.

Designed for compact mounting alongside motorcycle switchgear, the kit offers a clean, OEM+ appearance. An in-line fuse safeguards your devices from potential power surges, ensuring reliable and safe operation.

Features:

• Max 5V, 3A output.
• Water-resistant cap.
• Fits 22-25?mm handlebars.
• Dual USB output.
• 1.8m cable.
• 0.5mA back drain current when not in use.
• Device-specific charging cable not included.

Charger Cable Quick Disconnect Lead 53cm 18AWG Car Lighter & BMW CBUS Adaptor Plug. Use to connect and extend the length of any Motobatt 1, 2 or 4 bank charger.

Attach directly to any Motobatt Charger Plug or accessory
Connects to BMW Cbus Socket
Universal 2 Pin DIN Plug
Flex Fit Plug
Plug right in when the vehicle is not in use

Seamlessly integrate your choice of USB charger with your motorcycle. Mount your charging port somewhere convenient using the included 3M™ sticky pad then simply run the attached ring leads directly to your battery terminals.

Once the charging point is neatly positioned and cables hidden away, the charging port provides up to 3 Amps of power, perfect for mobile devices. Your phone or device is then protected from any potential surge in power thanks to the in-line fuse.

The charger draws zero current when not in use so there is no danger of draining your battery and the included splash-resistant silicone cap will also ensure there's no water ingress during the worst of the weather.

USB Type A female connector charging kit with splash-resistant cap*.

Key Features

• 5V output
• 1.6m lead
• 3 Amp USB output
• 12-24V battery powered
• Easy installation - 3M™ pad

* Device-specific charging cable not included.

Oxford crocodile clips accessory lead adapter allows an Oxford charger to be connected to a set of crocodile clips for attachment to a battery.

Got an electronic device like a spot light with a male lighter attachment? Want to run it off your bike but don’t have a female lighter fitting? Not any more, just connect this fitting to any SAE battery lead and you're ready to go!

No soldering or splicing your wiring harness, simply plug it straight into any SAE battery lead. When you’re done, unplug this fitting and plug one of our charger cables in and charge your phone or tablet.

If you have a 12V accessory with a standard cigarette lighter plug and you want to power it from a jump starter battery, this is the lead. Plug the EC5 plug into the corresponding EC5 port on your Jump Starter and plug your accessory plug into the lighter socket.

NOTE: Compatible with jump starter batteries using EC5 socket only.

Kit includes:

1x MOTOBATT LOW VOLTAGE ALARM (SKU: MBZTLVBA)
1x MOTOBATT CHARGER CABLE LEAD (SKU: MBZCCRT)

See individual component descriptions below.

MOTOBATT LOW VOLTAGE ALARM (NEED MBZCCRT LEAD 18AWG)

Connects Easily by way of 2 Pin Din Plug. Mount direct to your ring terminal harness or battery using compatible MOTOBATT CHARGER CABLE LEAD with matching 2 din plug and ring terminals (SKU: MBZCCRT).

Application:

• Use on any Lead Acid 12V Battery.
• Starts to Alert when battery voltage drops below 12.2 Volts with a loud beeping sound.
• Particularly good for monitoring Showroom bikes to ensure charge is kept up to date.
• Save money on replacing abused batteries
• Use on Bikes, Cars, Boats, Mowers, Jetskis, Snowmobiles and anywhere else you have a battery!

MOTOBATT CHARGER CABLE LEAD 18AWG 53CM RING TERM 6mm  (SKU: MBZCCRT)

Quality 18AWG wire battery Ring Terminal Harness used to fit many battery chargers including MotoBatt, Battery Tender, Battery Minder, Schumacher, Schauer, Yuasa, Pulsetech, Ozcharge.

Features:

• 53cm (21") 18AWG Cables with 7.5A Fuse.
• Suits 6mm ring terminals.
• Attach direct to any powersport battery.
• Suitable for all Motobatt Chargers.
• Suits also many other branded chargers.
• Plug right in when vehicle is not in use.
• 2 DIN Plug end with dustcap

The Rocky Creek RC-2000 is ideal for charging and maintaining all your 12V and 6V lead-acid batteries.

After it has fully charged a battery, the unit automatically switches to maintenance mode. This charger can charge and maintain batteries with a capacity from 2 to 60 Amp-hours. It emits a consistent 2A and includes safeguards such as reverse polarity protection, short circuit protection and overcharging prevention.

Press the mode button to change between 6V and 12V battery charging. The unit executes an 8-step charging cycle, an LED indicates when charging and when fully charged.

Features:

• Charges and maintains 6V and 12V lead-acid batteries.
• Suitable for battery capacities from 2 to 60Ah.
• Automatic switch to maintenance mode after full charge.
• Delivers a steady 2A output.
• -step charging cycle with LED status indicators.
• One-button switch between 6V and 12V modes.
• Built-in protections: reverse polarity, short circuit, and overcharging.

Permanently connect a charger or electrical accessory to a battery with this 0.5m cable.

Key Features
• Colour-coded ring terminal makes connection simple
• Connector: USA/SAE (OXEL105) or Standard (OXOF703)
• Suitable for 6mm ? bolts
• Cable connector comes with a weatherproof cap
• Weather-resistant fuse holder
• 0.5m cable length
• Suitable for up to 5amps

A highly versatile charger that will charge smaller and larger batteries and has the correct voltages for AGM, GEL, Calcium, Flooded, LifePo4. It has a handy Ring Terminal charging harness to connect right to your machine.

Suitable for 6v or 12v and has a 6-step fully automatic setup. Has a lighting system of red stop, yellow working on it, green go.

Features:

• Plug and Leave.
• Charges 6V / 12V Batteries.
• Charges batteries up to 45Ah.
• Charges Lithium batteries up to 70Ah.
• Maintenance Mode.
• Can charge WET, GEL, AGM, and Lithium batteries.
• Comes with eyelet connectors.

Paper roll for Motobatt Battery Capacity Tester Printer (SKU: MBZTBCT).

Dimensions: 57x50 13mm centre 30m

Oxford Crocodile Clips allows you to connect to any SAE accessory.

The Oxford SAE adapter allows you to connect your Oximiser to a USA-style SAE connector.

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.

Features:

• Great mobile voltage testing
• Slim compact design
• Compatible with 12V batteries
• Provides quick and easy voltage readings

Specifications:

• Application: 12V Batteries
• Test Range:
  • Battery Voltage:
  • 25% - 9.8 to 12V
  • 50% - 12V to 12.4V
  • 75% - 12.4V to 12.6V
  • 100% - 12.6V to 13.8V
  • Charging Voltage:
  • Good - 13.8V to 14.7V
  • Bad - 14.7V and up

On some bikes, like the 2015 BMW R1200GS LC, the battery isn’t easy to access. For the R1200GS, it’s hidden behind the left-hand side panel. On others, it's tucked behind fuel tank covers that must be removed just to reach the battery. That’s not ideal when you need to use a Mini Jump Starter, since you can't easily connect the jumper cables.

Here’s a practical solution: Access the battery once and install the included battery leads—red to positive (+), black to negative (−). The cables are 500mm long and connect to an EC5 plug. Secure the plug somewhere easily accessible on your bike.

If you ever need to jump-start, just plug the EC5 connector into your Mini Jump Starter; no tools or disassembly required.