Battery Chargers

All Balls Battery Cable Kit - Black

Fits FL 1965 - 1979

Maintains up to 12 batteries at the same time. Essential to keep batteries charged, fresh, and ready for sale 24/7. This unit can be fixed to the wall with the included mounting bracket or used with Motobatt 12 Station Maintainer Rack [MBZSTANDB] (sold separately), which holds 12 batteries. The maintainer unit and stand are available together as a kit: MBZC12KIT.

Features:

• Versatile. Mounts on the wall or the battery storage rack using available brackets.
• Maintains 12 batteries at a time.
• Smart Charger will maintain batteries indefinitely.
• Will not over-charge.

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.

Features:

• Self Sensing Microprocessor
• 3 Step Algorithm
• Fully Automatic Charging & Maintaining
• Overcharge Protection
• Reverse Polarity Protection
• Short Circuit Protection
• Maintains Full Charge

Specifications:

• Application: 6V & 12V AGM, Lead-Acid, Calcium & Gel Batteries
• Input: Auto-switching 120-240VAC 50/60 Hz
• Output: Select 6V/12VDC 500mA
• Max Charge Current: 500mA
• Max Voltage: 7.4V (6V Battery), 14.7V (12V Battery)
• Battery Capacity: 2-20Ah (Charging), up to 50Ah (Maintenance)

The Oxford 3 metre extension lead is suitable for up to 5amps.

Don't leave home without this powerful and high-quality lithium Jump pack from Motobatt. Featuring quality plug connections to high-voltage clamp leads, ultra-reliable and sound connections.

800A peak current will have your Vehicle or Motorcycle starting in seconds. This little beauty is a must-have for the trail or the road. It can be charged from a standard power outlet or by way of a cigarette plug.

Features:

• Jump Start for most 12V Vehicles (motorcycle or car).
• 5V/2A USB Outlet charges smartphones and tablets.
• LED Flashlight, 3 modes:
  • Illumination
  • Strobe
  • SOS
• Built-in protection for overcharging and over- discharging.
• Charge indicator - Quickly view charge levels.
• Automatic power on/off - When not in use.
• Copper jumper clamps.

Specification:

• Start Current: 200a.
• Max Current: 400a.
• Dimensions: 135 x 76 x 16mm.
• Weight: 225g.
• Output: 5V/2A (device), 12V (vehicle jump start).
• Operation temperature: -20c to 60c
• Full charging time: 2 hours

Includes:

• 1 jump starter
• 1 piece 3-into-1 USB cable
• 1 piece Mini jumper cable
• 1 piece date line
• 1 pouch bag

About Motobatt

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 5000 charges a range of 12V batteries at a maximum charge rate of 5000mA (5Amps). The intelligent 8-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Compatible with WET/MF, AGM, GEL and LiFePO4 batteries, each charging program is tailored to the selected battery type. A desulfation stage repairs damaged batteries automatically during the charging profile, bringing them back to life (not LiFePO4).

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated - indoor and outdoor use.
• 8-stage automatic charging: polarity test, analyse, desulfation (12V WET/MF, AGM, GEL), soft start mode, bulk mode, absorption mode, voltage check, maintain mode (float voltage).
• AH Capacity: 20AH - 120AH.
• Compatible with: 12V WET/MF, AGM, GEL and LiFePO4 batteries.
• Max output 5000mA.
• LCD display: clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for increased ventilation around the Oximiser casing.
• Waterproof cable exit with cable strain relief.
• Winter-grade cable.
• Removable hanger: easy to use, clip in and turn to hold the hanger in place.

Connect a USB device to your Motobatt Battery with this cable, charge your phone, gps etc while you ride.

Features:

• Get power from 12V motorcycle battery.
• USB output 5V 2.1A max.
• Ideal for charging the smarth phone, Tablet PC and GPS from your motorcycle battery.
• User friendly connect the battery via SAE coannector.

All Balls Long Universal Battery Cable - Black

Charger cable lead, 18AWG 53cm Alligator Clips Tender.

This connector will enable you to run accessories like the MotoPressor Pocket Pump off a Mini Jump Starter. Plug the Blue plug (EC5) into your Mini Jump Starter and the other end into any accessory running an SAE connector like our MotoPressor Pocket Pump. You now have a means to connect and power any of your accessories from your Mini Jump Starter.

IMPORTANT - This lead is designed to run accessories like the Motopressor pocket pump. It is not designed to start your bike or car. Doing so is dangerous, will damage the lead and could cause damage to your bike or car. Use the crocodile clips supplied with your mini jump starter to start your bike or car.

Permanently connect a charger or electrical accessory to a battery with this 0.5m cable.

Key Features
• Colour-coded ring terminal makes connection simple
• Connector: USA/SAE (OXEL105) or Standard (OXOF703)
• Suitable for 6mm ? bolts
• Cable connector comes with a weatherproof cap
• Weather-resistant fuse holder
• 0.5m cable length
• Suitable for up to 5amps
• Bulk packed without retail packaging

Hardwire your charging solution to your bike battery. The two USB power ports offer 5V/2.1A per socket, and when powered on will display your battery voltage. The USB charging ports supply enough power to charge devices like phones, tablets, trackers, GPS, etc.

NOTE: The wire will come on when the ignition is turned on. We recommend installation by an auto electrician.

These cables will increase starter performance by reducing voltage losses from undersized cables.

• The outer jacket material is rated for 125 °C and is oil and gas-resistant.
• Meets or exceeds OEM specs for fit and performance.
• Cables will increase starter performance by reducing voltage losses from undersized cables.
• Cables are manufactured with pure electrolytic grade, 36 gauge copper wire strands.
• The 7 over 7 bundling of the copper strands maximizes current flow and the flexibility of the cable.
• The outer jacket material is rated for 125 °C and is oil and gas-resistant.

The Oximiser 3X is an advanced battery management system.

The Oximiser 3X is Oxford's most versatile, most powerful, multi-purpose maintenance product. It offers not one, but THREE automated charging programs for differing battery sizes - perfect for bikes, cars and even leisure batteries! So, if you have multiple toys in your garage, it's the only battery optimiser you are ever likely to need.

Features

• Completely redesigned and tested in the UK using top-quality long-life components.
• A 2-year warranty is included as standard.
• A soft-start charging mode to improve recovery of deeply discharged batteries as low as 8 volts.
• Intelligent charging will cycle-charge in an attempt to recover sulphated batteries.
• Suitable for all 12V automotive batteries including LITHIUM LiFePO4 motorcycle batteries.
• New voltage sensors quickly detect high current drain and will automatically revert to the most appropriate charge rate.
• Fast and efficient charging in all modes keeps charge times short and reduces main power consumption.
• Soft touch rubberised case for improved grip and ruggedness.
• Up to 3.6 Amps charging power for batteries up to 125Ah capacity.
• Induction cooling.
• Three charging mode power options.

Three Charging mode power options:

• Motorbike - 14.4V / 0.8A , for batteries under 36Ah including LiFePO4
• Car - 14.4V / 3.6A , a common charge rate for lead Acid, MF, GEL and LiFePO4 batteries
• Winter- 14.7V / 3.6A, suitable for AGM batteries including stop/start technology. Especially useful for charging batteries in freezing weather.

8-Stage Automatic Battery Management:

• Polarity Check
  • Checks the battery leads have been connected correctly.
• Battery Analysis
  • Assesses battery and determines the best charging method.
• Soft Start Charge
  • Controlled build-up of charge current ensuring discharged batteries are charged safely.
• Bulk Fast Charge
  • Charges at a fast rate to bring the battery to approximately 85% capacity.
• Absorption Charge
  • Lowers the charge rate and gives a topping charge to ensure the battery is charged to 100%.
• Voltage Check
  • Hourly voltage checks assess battery health.
• Battery Condition
  • LED lights indicate a weak or strong battery.
• Maintain Mode
  • Applies an appropriate charge if voltage drops outside acceptable limits to ensure the battery voltage and condition remain perfect.

Oxford 12v cigarette lighter accessory plug.

Key Features
• Plug in an SAE-powered accessory or charger without connecting directly to the battery.
• No need to remove the motorcycle seat to access the battery.
• Cable length: 0.5m (OXEL106) or 3.0m (OXOF704).
• Connector: USA/SAE (OXEL106) or Standard (OXOF704).
• Suitable for up to 5amps.

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.

Features:

• Waterproof, perfect for outdoors
• 9 Step Algorithm
• Automatic Charging & Maintaining
• Overcharge Protection
• Reverse Polarity Protection
• Short Circuit Protection
• Spark Proof
• Maintains Full Charge

Specifications:

• Application: 12V AGM, Lead-Acid, Calcium & Gel Batteries
• Input: Auto-switching 120-240VAC 50/60 Hz
• Input Cable: 6' 18AWG, U.S. SPT-2, EU-H03VV, Aust/NZ-H03VV
• Output: 12VDC 1A
• Max Charge Current: 1A
• Max Voltage: 14.8V
• Battery Capacity: 2-33Ah (Charging), up to 80Ah (Maintenance)

Motobatt chargers utilise Motobatt’s unique 9 Stage Charging and Maintenance Process.

Qualification Phase:

Initially ensures that the battery is in good condition prior to launching charge processing. As a safety measure charge process will not begin if the battery is below 2V.

Battery Rescue Phase:

Motobatt Battery Rescue starts if the battery voltage has risen unusually high in the early portion of the re-charge cycle. This is usually caused by plate sulfation. Once the battery rescue phase has succeeded in getting the battery to accept power, normal battery charging will begin.

Soft Start Phase:

Soft Start is used when the charger has detected a battery at a very low initial state of charge. Voltage and current are delivered at specified rates to help the battery to recover prior to entering Pulse charge mode.

Pulse Mode Phase:

Motobatt Pulse mode provides a high-frequency pulse charge to help the newly recovered battery to continue to accept charge as it enters the reconditioning phase.

Recondition Phase:

The Motobatt reconditioning phase continues to work the battery at a slightly higher voltage and amperage to “re-activate” the battery plates for improved depth of charge and charge acceptance.

Bulk Charge Phase:

With the battery now through Pulse and reconditioning phases and well on its way to full recovery the Motobatt bulk charge phase gives the battery constant current taking the battery up to 80% of its capacity.

Absorption Phase:

In the Motobatt absorption phase, the battery is given constant voltage while the current is reduced based on action taken from monitoring the batteries current state until the battery is 100% charged.

Check Phase:

The battery will now be checked to be sure that it is holding a charge properly and the charger will make a determination and classify the battery for use, or not.

Maintenance Phase:

The battery can be safely left on the charger indefinitely. The unit will monitor the battery and “turn-on” again as needed to maintain the battery at a full state of readiness.

Oxford 1.5m USA/SAE extension lead, suitable for up to 5amps.

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. Attach the power lead to your battery, Red to (+) and Black to (-). Next, attach the corresponding wires to the back of the socket as marked on the back of the socket. The socket will handle 12V/120W.

NOTE: Before drilling any holes, ensure there is enough space behind the installation point to accommodate the body of the socket.

The Fat Boy Charger is fully automatic and suitable for charging 12-volt bike batteries with capacities between 4Ah and 100Ah. The charger also acts as a maintainer and you can 'connect and forget' as the charger will keep the battery voltage topped up. The Fat Boy is also suitable for charging lithium batteries. There is also protection against short circuits, reverse polarity and thermal overload. Comes with crocodile clips and eyelet connectors. This charger is also wall mountable.

Features:

• Charges 12V Batteries and lithium batteries of 2Ah - 20Ah.
• Charges batteries of 4Ah - 100Ah.
• Trickle charges STD, GEL, AGM batteries of all sizes.
• Can charge WET, GEL, AGM, and lithium batteries.
• Canbus Compatible
• Automatic Charging and maintaining
• Overcharge Protection
• Reverse Polarity Protection (Lead-Acid only)
• Short Circuit Protection (Lead-Acid only)
• Spark-proof (Lead-Acid only)

Specifications:

• Application: 12V AGM, Lead-Acid and Lithium
• Input: Auto-switching 120-240VAC 50/60 Hz
• Input Cable: 6' 18AWG, U.S. SPT-2, EU-H03VV, Aust/NZ-H03VV
• Output: 12VDC 2A
• Max Charge Current: 2A
• Max Voltage: 14.9V (Lead-Acid), 14.6V (Lithium)
• Battery Capacity: 4-100Ah (Lead-Acid), 2-20Ah (Lithium)

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 1250 charges a range of 6 and 12V batteries at a maximum charge rate of 1300mA (1.3Amps). The intelligent 8-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Compatible with WET/MF, AGM, GEL and LiFePO4 batteries, each charging program is tailored to the selected battery type. A desulfation stage repairs damaged batteries automatically during the charging profile, bringing them back to life (not LiFePO4).

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated - indoor and outdoor use.
• 8 stage automatic charging: polarity test, analyse, desulfation (12V WET/MF, AGM, GEL), soft start mode, bulk mode, absorption mode, voltage check, maintain mode (float voltage).
• AH Capacity: 3.5AH - 40AH.
• Compatible with: 6V and 12V WET/MF, AGM, GEL and 12V LiFePO4 batteries.
• Max output 1300mA.
• LCD display: clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for increased ventilation around the Oximiser casing.
• Waterproof cable exit with cable strain relief.
• Winter-grade cable.
• Removable hanger: easy to use, clip in and turn to hold the hanger in place.

Got an accessory socket on your bike and want to connect a device with an SAE fitting like a MotoPressor Pocket Pump? This clever adaptor comes with a male lighter fitting that will fit BOTH car and motorcycle lighter sockets.

To plug into a motorcycle-style (Hella) socket, simply remove the RED adaptor at the front of the plug and plug straight into the motorcycle socket. To plug into a car socket, leave the RED adaptor in. Now you can use your MotoPressor Pocket Pump on both your bike and car.

This Oxford battery charger accessory allows the lead on an Oxford charger to be extended by 3 metres.