HANDLEBAR & CONTROL

Oxford Hot Grips are the perfect accessory for maintaining warm hands all year round, perfect for using your summer gloves throughout winter or providing some additional warmth in summer. Oxford's new EVO Hot Grips include the all-new Thermistor controller, providing a clean and easy-to-read display with an upgraded 6-core over-moulded entry for additional strength and durability. Waterproof screw connectors are IP67 rated while a new wiring layout provides consistent heating throughout the grip. The Hot Grips have 5 heat levels ranging from 35°C to 45°C, allowing you to dial in the perfect temperature for every condition and setup. All Oxford Hot Grips have a battery-saving mode that automatically turns off the grips if you forget to, preventing permanent battery damage.

Features:

• Grip length can be trimmed if required.
• Intelligent Thermistor heat controller included.
• 5 heat settings give the perfect operating temperature.
• Battery saving mode prevents permanent battery damage.
• Sealed for life double bonded rainproof switch that draws under 4A.
• Soft, ultra-grippy diamond tread is inspired by race grips for comfort and feedback.
• 123mm grip length can be cleanly cut down to 114mm.

Note:

Oxford recommends plugging in and heating the Hot Grips BEFORE installation. This allows the grips to fit over the throttle tube more easily.

A replacement mirror suitable for most naked bikes.

Features:

• E-marked for road use
• Left (OX152) and right (OX153) mirror
• M10 x 1.25 RH thread
• Mirror adapters available in a variety of sizes (OX579-OX581)

Universal bar end mirrors from Oxford.

Features:

• Fits 22mm diameter handlebars using 12-18mm expansion bushes.
• To be used in conjunction with original-fit mirrors.
• 68mm diameter mirror.

A premium single Bar End Mirror machined from billet aluminium. Easily adjustable and featuring anti-glare convex glass this mirror is designed to fit 22mm / 7/8" handlebars.

Features:

• Can be fitted above or below handlebar
• Suitable for all motorcycle types
• Machined from billet aluminium
• Anti-glare convex glass
• 70mm diameter mirror
• 12 - 18mm expansion bushes
• Easily adjustable
• Universal fitting
• To be used in conjunction with original-fit mirrors.

A replacement mirror suitable for most naked bikes.

Features:

• E-marked for road use
• Left (OX152) and right (OX153) mirror
• M10 x 1.25 RH thread
• Mirror adapters available in a variety of sizes (OX579-OX581)

Aluminium weighted bar end for standard 22mm diameter handlebars.

Features:

• Made from CNC aluminium.
• Includes 5mm hex key.

The next evolution of HotGrips® Pro.

In response to customer feedback, Oxford added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves.

Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected setting before dimming - to reduce distraction whilst driving.

Each grip houses its own internal temperature control unit, which independently measures and controls the heat of each grip using built- in thermistors to maintain the desired temperature setting.

Manufactured from silicone, this incredible material increases the grip‘s lifespan by up to 200% without compromising comfort or performance, as well as delivering cable strain improvement and enhanced grip levels.

Features:

• HotGrips® Pro 2.0 Sport specific
  • Grip guaranteed - Knurling tread pattern creates the largest surface area for maximum of grip and control.
  • Customisable grips - Grip length of 125mm, but can be trimmed to 120, 115mm if required, with open ends allowing bar end weights can be fitted.
• 5 smart heat settings: Red 55°C, Purple 50°C, Green 45°C, White 40°C, Blue 35°C
• The thermistor reacts to temperature changes in the environment and adjusts the heat output accordingly, maintaining the selected temperature setting.
• Integrated controller
  • The built-in controller allows the rider to effortlessly control the temperature of their Hotgrips® Pro without removing their hand from the grip.
  • Multi-coloured LED displays the chosen temperature setting and dims to avoid any distraction.
• Intelligent heat setting memory
  • The intelligent heat setting memory function stores the previous heat setting and defaults to this at power-up, saving time when in regular use.
• Battery saving modes
  • Protects against flat batteries, so if you forget to turn the switch off it will do it for you!
  • HotGrips® Pro offers an additional battery-saving mode for lithium batteries, now common on high-performance motorcycles.
• Waterproof construction
  • Fully waterproof connectors and integrated controller meet IP65 rating to protect your HotGrips® from the elements.
• Grip Features
  • Silicone-formed grips - increase grip lifespan by up to 200% without compromising comfort or performance.
  • Integrated cable strain relief - a more compact cable exit enables grip size to be reduced.
  • Fits 7/8" (22mm) ∅ handlebars.

Replacement mirror suitable for most naked bikes.

• Right Side
M10 x 1.25 RH thread

Replacement grip in sleek black, designed specifically for your Pro Adventure HotGrips®. Need to switch out that grip? This one's got you covered, ensuring your HotGrips® are ready to tackle any adventure that comes your way.

Extra thick replacement grips - created for larger hands.

Features:

• Fits 22mm handlebars.
• Two bar end caps included.
• Grips can be trimmed to length.
• Grip length 119mm - 116mm trim to desired length.
• Grip diameter 33mm

The Oxford Premium Hotgrips are the latest in a thirty-year quest to find the best solution for warm hands in the worst conditions. These grips focus specifically on ATVs and are therefore suitable for quads. Besides these ATV types, other models focus on different types of riding preferences: touring, sports, retro, adventure, and cruiser.

In addition to being nice and warm, the ATV grips are equipped with an ergonomic surface consisting of different structures. Comfort, feel, grip and control are all there, which is important on an adventure quad or all-terrain vehicle. Wear resistance and good vibration-absorbing qualities make these grips a very good choice, even without their built-in heating capability. Each grip is 130 mm long, with an open end to allow for installing handlebar weights or handguards. The length is easily trimmed, down to 121 mm, should you feel the need. The grips will fit all handlebar diameters up to 22 mm. Power consumption is less than 4 A per pair.

A weatherproof controller, to be mounted on your handlebars, allows for easy control and monitoring of the heat setting. You can see at a glance which of the five settings you are currently using. Should you forget to turn if off after your ride - while in a rush to get inside, where it's warm - the Hotgrips Premium will do it for you, thanks to the Battery Saving Mode. There's no need to install a power-saving relay either, as this handlebar heater only switches on when there's enough power and energy to do so. That normally means: when the engine is running.

Mounting and installing the Premium Hotgrips is easy. Just connect the cable to the battery and smoothly slide the grips onto the handlebars. Everything you need for this - including the metal bracket for the controller - is included as standard.

It goes without saying that you should read through the instruction booklet first, and that having heated grips doesn't mean you can ride without your protective gloves.

Dimensions:

• Width: 5 cm
• Height: 4.7 cm
• Thickness: 1.2 cm

REPLACEMENT WIRING LOOM FOR THE OXFORD V9 EVO ATV HOT GRIPS

Replacement grip in sleek black, designed specifically for your Pro Adventure HotGrips®. Need to switch out that grip? This one's got you covered, ensuring your HotGrips® are ready to tackle any adventure that comes your way.

A premium bar end mirror machined from billet aluminium. Easily adjustable and featuring anti-glare convex glass this mirror is designed to fit 22mm / 7/8" handlebars.

Features:

• Can be fitted above or below handlebar.
• Suitable for all motorcycle types.
• Machined from billet aluminium.
• Anti-glare convex glass.
• 12 - 18mm expansion bushes.
• Easily adjustable.
• Universal fitting.
• Optional spacer included.
• To be used in conjunction with original-fit mirrors.

Replacement mirror suitable for most naked bikes.

• Universal Left or Right Side
• M10 x 1.25 right-hand thread

The next evolution of HotGrips® Pro.

In response to customer feedback, Oxford added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves.

Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected setting before dimming - to reduce distraction whilst driving.

Each grip houses its own internal temperature control unit, which independently measures and controls the heat of each grip using built- in thermistors to maintain the desired temperature setting.

Manufactured from silicone, this incredible material increases the grip‘s lifespan by up to 200% without compromising comfort or performance, as well as delivering cable strain improvement and enhanced grip levels.

Features:

• HotGrips® Pro 2.0 Adventure specific
  • Grip guaranteed - hex tread pattern for vibration absorption and durability; knurling tread pattern creates the largest surface area for maximum grip and control; gripper bars for tough terrain where grip is more important for control and stability.
  • Customisable grips - Grip length of 132mm but can be trimmed to 123, 120 or 117mm if required, with open ends allowing bar end weights can be fitted.
• 5 smart heat settings: Red 55°C, Purple 50°C, Green 45°C, White 40°C, Blue 35°C
• The thermistor reacts to temperature changes in the environment and adjusts the heat output accordingly, maintaining the selected temperature setting.
• Integrated controller
  • The built-in controller allows the rider to effortlessly control the temperature of their Hotgrips® Pro without removing their hand from the grip.
  • Multi-coloured LED displays the chosen temperature setting and dims to avoid any distraction.
• Intelligent heat setting memory
  • The intelligent heat setting memory function stores the previous heat setting and defaults to this at power-up, saving time when in regular use.
• Battery saving modes
  • Protects against flat batteries, so if you forget to turn the switch off it will do it for you!
  • HotGrips® Pro offers an additional battery-saving mode for lithium batteries, now common on high-performance motorcycles.
• Waterproof construction
  • Fully waterproof connectors and integrated controller meet IP65 rating to protect your HotGrips® from the elements.
• Grip Features
  • Silicone-formed grips - increase grip lifespan by up to 200% without compromising comfort or performance.
  • Integrated cable strain relief - a more compact cable exit enables grip size to be reduced.
  • Fits 7/8" (22mm) ∅ handlebars.

A game-changer for commuters and now with a wider opening giving direct access to switchgear controls, Oxford Commuter Muffs protect hands from wind, rain and UV and are easy to use when wearing gloves.

Oxford Commuter Muffs are made from water-resistant neoprene fabric with bonded seams, keeping hands warm and dry. An adjustable windproof wrist protector can also be tightened (if required) around the jacket sleeves or gloves for extra wind protection.

These Oxford Commuter Muffs are designed to be a universal fit for all sizes of bike handlebars.

Features:

• Tough neoprene construction with waterproof bonded seams.
• Universal fit for all sizes of handlebars.
• Large adjustable switchgear opening with pull-cord gaiter.
• Thermal fur/fleece lining.
• Weatherproof cuff with rain shield and pull-cord gaiter.
• Pre-formed opening for ease of access.
• Designed for a universal fit (bar end not included).
• Protects against rain, UV and wind chill.

If you've broken your mirrors, don't panic. We have you sorted with the range of OEM styled Whites Mirrors. Sold individually to reduce cost when only requiring replacement of one mirror. Built to meet and exceed OEM specifications at a fraction of the price, making the Whites Mirrors the perfect cost-effective replacement for your original mirrors.

Features:

• OEM replacement part.
• OEM styled.
• Screw mount type.
• Teardrop mirror design.
• Universal fitment.
• Competitive pricing.
• Sold individually.

Quality thermostat from All Balls.

Features:

• Direct OEM replacement.
• Matches OEM temperature specifications.
• Includes O-ring gasket when required.

Confirm suitability for your year, make, model prior to purchase.

For those that have the Oxford Lever Guard (OXOX700), these accessories can be added to convert them into handguards.

ALLOY END CAP FOR THE OXFORD OXOF770 ATV HOT GRIPS - SOLD INDIVIDUALLY

Oxford Mirror Extenders are perfect for increasing rear visibility while riding, raising the mirror by 51mm further up and 40mm out. Easy to fit, simply unscrew your mirrors, screw the extenders in place, and then screw your mirrors into the extenders.

Key Features
• CNC aluminium construction
• Anodised black
• 2 x M10 x 1.25 right-hand thread
• Bolts included
• 40mm x 51mm extension

Replacement grip in sleek black, designed specifically for your Pro Adventure HotGrips®. Need to switch out that grip? This one's got you covered, ensuring your HotGrips® are ready to tackle any adventure that comes your way.