HARD PARTS

A quality ball Joint kit from All Balls Racing.

• Bearing cup is made from POM-M90 to isolate steel rod from housing.
• Comes with snap ring and cotter pin. Saves you lots over OEM!

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

• Direct OEM replacement fuel line clamp kit
• This ultimate fuel line clamp kit is an absolute necessity for any shop, technician, or DIY mechanic
• Kit contains 4 of each Fuel Star fuel line OEM replica clamps, available in sizes from 7-17mm I.D.
• Each clamp is an exact replica of the major OEM's fuel line clamps and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• 4-packs also available to refill the kit

HFP replacement fuel pumps, modules, assemblies, and kit components are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

The HFP-181 is a replacement external (frame mounted) fuel pump for carbureted motorcycle applications.  This pump kit provides the exact pressure and volume as required by Honda, Kawasaki, KTM, Suzuki, and Yamaha motorcycle applications.

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

A 4-wire direct replacement frame-mounted electric fuel pump for motorcycle and powersports applications. Quantum replacement fuel pumps are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

Features:

• OEM or better performance.
• Polished corrosion-resistant case to help minimise seizing during non-operation.
• Specifically designed for quiet operation.
• Drop-in replacement.
• Patented check valve technology.
• Compatible with modern ethanol-infused pump gasoline.

Kit includes water pump cover gasket or o-ring, water pump shaft bearing(s) and seal(s) to repair a leaking water pump seal and/or a failed bearing.

Features:

• Precision micro bearings provide OE quality and durability.
• High pressure/temperature mechanical and rubber seals.

Trusted by riders and dealers in the automotive market, the Whites CV Axle proves its durability against the industry's top manufacturers. With oversized outer joints accommodating up to a 45° swing angle, it enhances suspension travel and robustness. Through the latest CNC manufacturing technologies, the inner joints allow up to 45° of movement. Enhanced by high-strength TPE boots, OTK clamps, and moly grease, it delivers optimal performance in harsh conditions, significantly extending axle lifespan.

• Up to 45° swing angle.
• Up to 45° travel on inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Please refer to our online fitment guide for regular additions to the range and specific fit for your model.

When it comes to quality, All Balls knows no compromises. All the products made under stringent quality control conditions. The latest manufacturing methods coupled with the use of the highest-grade materials ensure the closest tolerances are adhered to.

• Nut: 4
• Screw: 4

Hot Rods Bottom End Kits provide you with everything need to rebuild your bottom end for both 2 and 4-cycle engines.

Includes:

• Crankshaft
• Gas ket Set
• Oil Seal Kit
• Main Bearing
• Seal Kit

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

Kit contains direct OEM replacement bearing assembly with all the required components.

• Shock-bearing assemblies are sold individually for the upper or lower position.
• Plastic moulded bushings upgraded to machined Delrin.
• Mild steel pins upgraded to case hardened and precision ground SCM415/42 bearing steel.
• Many times, OEM manufacturers do not sell the components separately from the shock absorber.
• Where possible and applicable, we have added an o-ring to the ID of Delrin machined bushings for superior water and dirt exclusion.

These sets include all gaskets necessary to rebuild the engine and transmission.

Features:

• Restore performance and reliability.
• Produce more power, strength, and durability.
• Surpasses OE quality.

Note: Does NOT include transmission seals.

NOTE: This complete Vertex Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission
• Note: Does NOT include transmission seals

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications

• Height : 6.563in (167mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Filter Re-Oiling Amount: 1.1oz (33ml)

The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not overheating.

Features:

• Easy-to-read LCD display and an ultra-thin design.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Surface mount for easy install.
• Includes double-sided VHB tape or can be bolted on.
• Customizable warnings and maintenance reminders with flash alert service alarms
• Functions on key switch for external power if internal battery dies.
• -40°-300°C/575°F

What's in the box:

• TTO Temperature
• Screw Caps and VHB Tape
• Water Temperature Sensor, 25mm coolant sensor
• Hose clamps, for inline water sensor

NOTE: LEFT RADIATOR ONLY, FOR RIGHT SEE WPRAD076R FOR PAIR SEE WPRAD076P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features

• Designed to provide increased horsepower and acceleration.
• Pleated cotton media provides a large filtration area offering low restriction, high-capacity and long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Fits directly into OEM air box with an application-specific sealing bead ensuring a precise fit.
• No fuel management modifications are required to obtain increased performance.
• Washable and reusable, most are pre-oiled and ready to ride.