MOTORCYCLE ACCESSORIES

The Oxford Aquatex bicycle cover is a lightweight bike cover for use indoors and outdoors. As you would expect from the world's best- selling cycle cover, it comes packed with useful features and is built to last.

Designed for indoor/outdoor use, it offers protection against rain and dust. Local police initiatives have shown that bike covers can be a useful anti-theft device - if a thief can't see what kind of bicycle is underneath, they are less likely to target it. Combine with one of our award-winning chain locks to add an additional layer of defence against any would-be bike thief.

Features:

• Double-stitched 100 Denier polyester for strength and durability.
• Complete exterior and interior protection. Can be used both as an outdoor rain cover and an indoor dust cover.
• An elasticated base holds the cover in place for a snug fit.
• Comes with a zipped carrier to store away compactly when not in use.
• Strong but lightweight material is UV-resistant, so it does not degrade in sunlight.
• Double PU coating for optimal waterproofing.
• Storage case provided.
• Available in three sizes. Sized for 1, 2 and 3 bikes

Important: Do not allow this cover to come into contact with hot parts or sharp objects.

A universal super thin vinyl tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or pillions.

Features:

• Super-thin tank pads designed to protect your paintwork whilst looking good.
• Universal shape to fit most bikes, but can be cut down in size.
• Weather resistant.

A universal super thin tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or billions.

Features:

• Super-Thin tank pads are designed to protect your paintwork whilst looking good.
• Universal shape to fit most bikes, but can be cut down in size.
• Weather resistant.

Gel tank knee pad to protect your tank paintwork from the rubbing caused by your knees.

Features:

• Protects paintwork.
• Clear adhesive allows decals and paint to show through.
• Pack includes 2 grips (LH + RH)

Oxford's Wheel Stripes are excellent for giving your bike that extra flash of colour and a subtle but sporty edge. The wheel stripes are made from a self-adhesive material and are designed to stay on your wheels in all weather conditions.

Key Features
• Unique pre-curved 4 part design
• Easy to apply - No applicator required
• 7mm wide and designed to fit 17 inch rims

The RAP-B-379-HA1U consists of a 1/4"-20 X 1" thread, connected to a 1" diameter ball, female blind barrel nut and nylon washer.

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x1 1/4"-20 x .87" Barrel Nut
• x1 0.77" Nylon Washer

The RAP-B-379U-252025 consists of a 1" diameter rubber ball connected to a 1/4"-20 x .25" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of these devices.

Features:

• RAM® Tough-Ball™ features a 1/4"-20 x .25" male threaded post for connection to a variety of devices
• Included B size 1" RAM® rubber balls allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of high-strength composites with stainless steel thread post for durability and reliability in the most demanding environments

Specifications:

• THREAD PITCH: 1/4"-20 x .25"
• BALL SIZE:B Size (1", 25.4mm)

To protect your paintwork, cut your own shapes to best suit your bike from this large clear adhesive sheet which comes complete with cutter guides.

Features:

• Cut-your-own Protectors
• Protect your paintwork against accidental knocks or rubbing caused by clothing, buckles, luggage systems, or pillion.
• This large sheet comes complete with cutter guides so that you can form the shapes that best suit your bike
• Place in areas that are prone to knocks and scratches
• Sheet Size: 425mm x 665mm

The RAM-B-230, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is ideal if your mount arm is just too short.

Features:

• The perfect adapter for connecting two B size RAM® Mounts double socket arms for extra extension or articulation
• Consists of two B size 1" RAM® rubber balls connected by a .75" length post
• Post is made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• PRODUCT DIMENSIONS: Overall Length: 2.54" (64.5mm)
• SOCKET-TO-SOCKET LENGTH: 1.75" (44.4mm)
• BALL SIZE: B Size (1", 25.4mm)

Heated motorcycle seat from Oxford.

Features:

• Three heat levels displayed through the RGB LED Power button: Red = 100%, Blue = 75%. Green = 50%.
• Heat output adjustable on the go.
• 12V power input needed, wire to switched live only Easy to install using the Hook
  and Loop System.
• 12W draw - at 12V input on 100% (Red) output.
• Added grip to the top and bottom material to maintain control when using the heated
  seat in cold or wet weather.
• Weatherproof electronics.

The Oxford Protex Stretch cover is a premium stretch-fit cover.

The cover is an outdoor cover that offers protection against rain, sun, snow, and dust. It comes fitted with a PVC window to hold a solar panel charger.

Local police initiatives have shown that bike covers can be a useful anti-theft device - if a thief can't see what kind of motorcycle is underneath, they are less likely to target it. Combine one of our award-winning chain or disc locks with a built-in alarm to add an additional layer of defence against any would-be bike thief.

Features:

• Lock pouches (front and rear) keep your padlock off the ground.
• Water-resistant seams.
• Soft lining protects against scratches.
• Ventilated to reduce condensation.
• Reflective panels and logos increase visibility at night.
• Tough 3-layer material protects against weather and light knocks.
• Elasticated bottom and adjustable belly strap to hold the cover in place.
• Strategically positioned holes facilitate the use of a lock (front and rear).
• Clear window for Oxford Solariser battery charger.
• Rear window to show number plate (optional).
• Available in 5 sizes (see sizing below) including MP3/3 Wheeler.

Sizes:

The following sizes are approximate, as the covers are shaped:

• Small: 203cm (Length) X 83cm (Width) X 119cm (Height)
• Medium: 229cm (Length) X 99cm (Width) X 125cm (Height)
• Large: 246cm (Length) X 104cm (Width) X 127cm (Height)
• X-Large: 277cm (Length) X 104cm (Width) X 141cm (Height)
• MP3 220cm (length) X 77.5cm (Width) X 130cm (Height)

Important: Do not allow this cover to come into contact with hot exhausts, engine parts, or sharp objects.

The RAM locking knob, includes a brass 1/4"-20 thread, for 1" (B size) socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.

Hardware Included:

• x2 Keys

A universal super thin tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or billions.

Features:

• Super-Thin tank pads are designed to protect your paintwork whilst looking good.
• Universal shape to fit most bikes, but can be cut down in size.
• Weather resistant.

Avoid those annoying knocks and scratches to your tank by using the new Transformer tank pad. Your tank cannot avoid contact with you and your riding gear, without protection damage is inevitable. The modular design allows for a custom fit to almost any tank shape. A matching set of knee pads is also available.

Features:

• Universal modular design.
• Textured grip finish.
• Fits a variety of tank shapes and sizes.
• Pre-cut 3M adhesive material.
• Template included.
• Protects paintwork.
• Matching Knee Grips available: OXOX799
• Size: 205mm (W) x 200mm (H) (lower width 100mm)

Avoid those annoying knocks and scratches to your tank by using the new Transformer tank pad. Your tank cannot avoid contact with you and your riding gear, without protection damage is inevitable. The modular design allows for a custom fit to almost any tank shape. A matching tank spine pad is also available.

Features:

• Universal modular design.
• Textured grip finish.
• Fits a variety of tank shapes and sizes.
• Pre-cut 3M adhesive material.
• Template included.
• Protects paintwork.
• Matching tank protector available: OXOX798.
• Pack includes 2 grips LH + RH
• Size: 280mm (W) x 100mm (H)

A universal super thin tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or billions.

Features:

• Super-Thin tank pads are designed to protect your paintwork whilst looking good.
• Universal shape to fit most bikes, but can be cut down in size.
• Weather resistant.

Spare a thought for today's pillion.

Bikes accelerate faster, brake harder and - at least at the sports end of the market - offer increasingly miserly passenger accommodation.

So how to hang on - in comfort and safety? Oxford has taken a fresh look at this challenge and applied its usual rigorous attention to detail to produce a unique solution which does the job and has been independently safety tested for peace of mind.

Features:

• Rubber grips are positioned thoughtfully on the rider's hips with the comfort of both rider and pillion in mind and have a generous aperture for large hands and padded gloves.
• Two belts are used to secure the grips in place. The first is a hook and loop fastened anti-dive belt, which offers stability under braking. The second is held in place by a buckle, but all the acceleration load is taken up by the immensely strong main strap.
• A sculpted, breathable, mesh backed pad at the front spreads any load taken up by the strap and its rubberised surface is friendly to the tank.
• All load bearing points are flag-stitched for maximum strength and the thread used is marine-grade to prevent it rotting if left damp and in case it comes into contact with salt water.
• Every component has been independently strength tested up to 180kg, which provides a comfortable margin for the 130kg rating deemed necessary for the product at the furthest possible extremes of usage.
• 3M^™ reflective stitching for improved visibility at night.
• Comprehensive instructions in multiple languages complete the safety package.

The new gripper tank spine will protect the paintwork from errant zips and buckles, keeping the petrol tank free from damage. Using thick 2.5mm silicone, to complete the protection, matching knee grips in the same material are also available.

Key Features
• Silicone 2.5mm construction
• Top quality 3M adhesive
• Protects paintwork
• Can be cut to fit any size tank
• Oil, chemical and temperature resistant
• Mini protectors included
• Matching tank pad available (OXOX615)

Size: 150mm(W) x 210mm(H)

The RAM-B-345 brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball centered. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. This mount is not compatible with the 2016 BMW R1200RT.

Features:

• Utilize your existing reservoir cover with this ball base for motorcycles; hardware included
• Compatible with any B size RAM® Mounts double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x4 M4 x 20mm Machine Screws
• x4 M4 x 30mm Machine Screws
• x4 M4 x 35mm Machine Screws
• x4 M4 Flat Washers
• x4 .188" Nylon Spacers

The RAM-B-201U-C consists of a long double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 6", this is the longest B size RAM^® double socket arm size and adds more reach to your favorite mounting solution. The easy to adjust knob allows for near-infinite adjustability for your connected device.

Features:

• Provides an extended reach with an overall length of 6" and a socket-to-socket length of 5.31"
• Attaches to any B size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• PRODUCT DIMENSIONS: Overall Length: 6" (152.4mm)
• SOCKET-TO-SOCKET LENGTH: 5.31" (134.8mm)
• BALL SIZE: B Size (1", 25.4mm)

Oxford's range of tank pads offers a simple and effective way to protect your paintwork from accidental knocks and scratches that often occur during riding from clothing, zips, and luggage. Manufactured from tough flexible vinyl they are easily cut to size and shape to fit the smallest tanks. They are resistant to UV light, scratches and abrasions, specifically designed to prevent everyday riding wear and tear on your paintwork.

Features:

• Hard-wearing self-adhesive vinyl gel tank pad.
• Protects against weather and scratches.
• Designed with cutting guides to help create the shape and size for your tank.

Oxford's range of tank pads offers a simple and effective way to protect your paintwork from accidental knocks and scratches that often occur during riding from clothing, zips, and luggage. Manufactured from tough flexible vinyl they are easily cut to size and shape to fit the smallest tanks. They are resistant to UV light, scratches and abrasions, specifically designed to prevent everyday riding wear and tear on your paintwork.

Features:

• Hard-wearing self-adhesive vinyl gel tank pad.
• Protects against weather and scratches.
• Designed with cutting guides to help create the shape and size for your tank.

The Oxford Aquatex bicycle cover is a lightweight bike cover for use indoors and outdoors. As you would expect from the world's best- selling cycle cover, it comes packed with useful features and is built to last.

Designed for indoor/outdoor use, it offers protection against rain and dust. Local police initiatives have shown that bike covers can be a useful anti-theft device - if a thief can't see what kind of bicycle is underneath, they are less likely to target it. Combine with one of our award-winning chain locks to add an additional layer of defence against any would-be bike thief.

Features:

• Double-stitched 100 Denier polyester for strength and durability.
• Complete exterior and interior protection. Can be used both as an outdoor rain cover and an indoor dust cover.
• An elasticated base holds the cover in place for a snug fit.
• Comes with a zipped carrier to store away compactly when not in use.
• Strong but lightweight material is UV-resistant, so it does not degrade in sunlight.
• Double PU coating for optimal waterproofing.
• Storage case provided.
• Available in three sizes. Sized for 1, 2 and 3 bikes

IMPORTANT: Do not allow this cover to come into contact with hot parts or sharp objects.

A universal super thin tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or billions.

Features:

• Super-Thin tank pads are designed to protect your paintwork whilst looking good.
• Universal shape to fit most bikes, but can be cut down in size.
• Weather resistant.

Ideal for motorcycle handlebars, the RAM-B-231ZU consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the U-bolt as well as a composite adapter that can narrow the rail to a minimum width of 0.5".

Features:

• Zinc-coated metal U-bolt base with 1" rubber ball is designed to sit at right angles to mounting rail; includes black cover caps for exposed ends of the U-bolt
• Compatible with any B size RAM® Mounts component; ball and socket technology allows for near-infinite adjustability
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• CLAMP RANGE: 0.5" (12.7mm) - 1.25" (31.7mm)diameter
• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x1 1/4"-20 U-Bolt for 0.5" - 1" Rails
• x1 1/4"-20 U-Bolt for 1" - 1.25" Rails
• x2 1/4"-20 Nylock Nuts
• x2 Rubber Caps
• x1 U-Bolt Spacer

The Oxford Tank Grip will protect your tank from knocks and scratches that clothing and luggage can cause. This silicone protector can be cut to fit any size of tank.

Features:

• Hollow square teeth create high level of mechanical grip.
• Oil, chemical and temperature resistant.
• Top quality 3M™ adhesive.
• Mini oval and rectangular protectors included.
• Can be cut to fit any size of tank.

Constructed with racing in mind to enhance performance through aerodynamic efficiency, Oxford Carbon Aero Wings are strategically placed on the motorcycle to optimise airflow with the purpose of increasing stability and downforce while cornering at high speeds.

Features:

• Lightweight.
• High strength-to-weight ratio.
• Simple installation - 3M VHB tape and optional clamping bolt.
• 3K carbon weave.

Includes:

• 2 x aero wings
• 3M™ adhesive pad
• M5 screw

Oxford's Wheel Stripes are excellent for giving your bike that extra flash of colour and a subtle but sporty edge. The wheel stripes are made from a self-adhesive material and are designed to stay on your wheels in all weather conditions.

Key Features
• Unique pre-curved 4 part design
• Easy to apply - No applicator required
• 7mm wide and designed to fit 17 inch rims

A universal gel tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or billions.

Features:

• Raised gel protects paintwork.
• Universal design.
• Can be cut to fit the smallest tank.
• Weather-resistant.