New Arrivals

Quality pair of fork oil seals from All Balls Racing.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual-sealing lips guarantee oil stays in and dirt stays out.

K&N XStream Series Motocross Air Filters take performance to the next level with the addition of a filter within the filter's top in order to add even more filtration area for high air-flow and capacity. Each filter piece has pleated media, which creates a large surface area that provides high airflow and great dirt holding capacity for extreme conditions. The two-piece design eases installation and removal on modern narrow-framed MX bikes. The epoxy-coated aluminium wire mesh, incorporated into a backfire screen, protects the filter element from harmful debris. A custom base seal ensures a precise and secure fit. K&N air filters are washable and reusable, and they come pre-oiled and ready to use!

Features:

• Large surface area for long service life
• Low restriction
• Washable and reusable
• Outstanding filtration

Specifications:

• Filter Material: Cotton Gauze
• Height: 3.75in (95mm)
• Inside Diameter: 2.75in (70mm)
• Outside Diameter: 4.5in (114mm)
• Washable: Yes
• Filter Re-Oiling Amount: 0.59oz (17ml)

A quality caliper rebuild kit from All Balls. Contains everything needed to rebuild your caliper to like new condition.

All the parts required to rebuild one side of a rear suspension.

Contains everything required to rebuild the rear knuckle.

Features:

• Needle bearing shafts are 52100 hardened and precision ground bearing steel.
• Self-lubricating Acetal nylon bushings for better wear and performance.
• All metal bushings are case-hardened and plated to prevent wear and corrosion.

Note: Kit contents will vary by fitment and are subject to change.

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

Constructed using a specific heat-treatment to ensure hardness for maximum durability and less wear and precision machined to match exact sizing requirements. Each size is sold individually as a pack of 5 to reduce costs when only requiring a particular size or restocking your valve shim pack.

Most 250cc 4-strokes use 7.48 mm OD shims, most 400cc and up 4-strokes use 9.48 mm OD shims, and KTM models use 10 or 8.90 mm OD shims.

Features:

• Heat-treated ensuring hardness for maximum durability and less wear.
• Precision machined to match exact size.
• Each size sold individually to keep cost down.
• Works with stock or aftermarket cams.
• Sold as a pack of 5.
• Sizes available:
  • 7.48mm x 1.20mm - 3.50mm in 0.05mm increments
  • 9.48mm x 1.20mm - 3.50mm in 0.05mm increments

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

All necessary parts to replace the fuel pump module.

Features:

• Includes complete module, retaining nut and gasket.
• Restores lost performance or non-functioning fuel pump with this economical solution.
• Pump draws less current than OEM counterpart while maintaining the same flow rate at working pressure, which reduces working temperatures and increases the life of the unit.

Note: Specific parts vary from kit to kit depending on the needs of your vehicle model.

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

Fed up with your trousers falling down? Do belts aggravate you while riding? Then look no further than the Oxford Riggers Braces! A great help in keeping your trousers up while both on and off your bike. With a comfortable design, sturdy design and adjustable length.

Features:

• Anti-snag nylon teeth protects clothing
• Extra strong clips
• Adjustable size - 400-790 mm length
• Quality 50mm wide elastic for comfort
• Material: 80% Elastic, 15% Metal and 5% PU

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

STOP BURNING YOUR REGULATOR RECTIFIER! It is time to update or replace your voltage regulator with RMSTATOR's advanced MOSFET technology. RM STATORS MOSFET Regulators run cooler than all OEM diode-style regulators. In addition, this rectifier has overheat protection, rather than burn up it will simply turn off for a while and cool off.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• The quality exceeds the OEM equipment
• Improved heat sink and charging capabilities
• Higher grade of electric components

What are the advantages of the MOSFET Technology?

• Runs much cooler than the traditional Shunt voltage regulator rectifier
• Less load on the stator, less work, less fuel is used and you save
• The power charging your battery is steadier and smooth
• Extends the battery’s life and cold-cranking capacity
• Removes stator load resulting in more engine power
• Optimize power delivery by switching the stator coils on or off

Dimensions:

• Width: 95 mm
• Length: 30 mm
• Height: 110 mm
• Fixation holes center to center: 78 mm

Other specifications:

• Number of plugs: 2
• Number of pins: 5
• Minimum Charging Voltage: 12 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20° to 85°

NOTE: Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.
4. There are multiple regulators possible for some Triumph models. Please take a look at the list below to see if your triumph model is there, and if so if it's the right part:
• Bonneville from 2017 to 2020 with a VIN Lower than 513324. If you have a HIGHER VIN you should look for parts # RM30405 / RMS020-103436
• Street Triple Standard 2008 to 2017 This part will only fit on Street Triple Standard with a VIN higher than 456777. For models with a VIN BETWEEN 354282 and 456776, please refer to part # RM30104, and for models with VIN lower than 354281, please refer to OEM T1300570
• Street Triple 1994 to 2018: This part will only fit on Street Triple with a VIN higher than 499574 and a Non-ABS version or higher than 499957 and an ABS version. If your vehicle has a VIN between 210445 and 461331, please refer to OEM T1304045. If your vehicle has a VIN between 461332 and 499573 and a non-ABS version, refer to OEM T1300165. If your vehicle has a VIN between 461332 and 499956 and an ABS version, refer to OEM T1301564. If your vehicle has a VIN BETWEEN 141872 and 210444, refer to part # RM30507 / RMS022-106230. If your vehicle has a VIN lower than 141871, please refer to OEM T1300021. If your vehicle has a carburetor, please refer to part # RM31000.
• Street Triple 2019 to 2020 This part will only fit on Street Triple Standard with a VIN higher than 456777. For models with a VIN BETWEEN 354282 and 456776, please refer to part # RM30104, and for models with VIN lower than 354281, please refer to OEM T1300570
• Street Triple R 2008 to 2020 This part will only fit on Street Triple R with a VIN higher than 456777. If your vehicle has a VIN BETWEEN 354282 and 456776, please refer to part # RM30104.
• Other Triumph models in the fitments list below that are not mentioned before are a direct fit and do not have any restrictions.
• There are two possible regulators for the Can-Am Outlander 1000 2012 and many Outlander Max 500 models. This regulator fits mostly the North American versions of these models. For the European / International versions, the right regulator is part RM30322. Always check in the 'Fits models' section and please compare to your original part before buying.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

If you've broken your mirrors, don't worry. We've got you covered with our range of OEM-style Whites Mirrors. An affordable solution when only one mirror needs replacing. Designed to meet or exceed OEM specifications, Whites Mirrors provide a high-quality, cost-effective alternative to your original mirrors. Available for most makes and models, we recommend using our fitment search to find the perfect mirror for your bike.

Features:

• OEM replacement part.
• OEM-styled.
• Competitive pricing.

Our new RMSTATOR machined aluminium Mosfet voltage regulator is a great upgrade for heat dissipation in any Powersports charging system. After 10 minutes of use, our billet aluminium heatsink runs cooler by 33% than standard cast regulator housings. Our new RMSTATORred regulator, equipped with the renowned Mosfet regulation technology, is an added value to any three-phase permanent magnet charging system.

STOP BURNING YOUR REGULATOR RECTIFIER!

It is time to update or replace your voltage regulator with the advanced MOSFET type. It runs cooler than all OEM diode-style regulators. In addition, this rectifier has overheat protection, rather than burn up, it will simply turn off for a while and cool off.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• The quality exceeds the OEM equipment
• Improved heat sink and charging capabilities
• Higher grade of electric components
• All shipped products are tested

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause of repetitive electrical issues.

Dimensions:

• Width: 103 mm
• Length: 103 mm
• Height: 28 mm

Other specifications:

• Number of plugs: 2
• Number of pins: 5
• Minimum Charging Voltage: 14.5 V +/- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

PLEASE NOTE: This voltage regulator is ONLY for lithium batteries THIS IS NOT FOR LEAD ACID BATTERIES. Output Voltage is the key factor in a voltage regulator designed specifically for Lithium batteries. The ideal charging voltage for Lithium batteries is 13.9-14.2VDC. The RMSTATOR regulator has a carefully set output voltage of 14.1VDC (+/- 0.1VDC). This stable and ideal output voltage carefully keeps a lithium battery in its ideal charging range.

Please contact the manufacturer of your Lithium-Ion Battery to ensure our product has the correct setpoint for their product.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.
4. There are multiple regulators possible for some Triumph models. Please take a look at the list below to see if your triumph model is there, if so if it's the right part:
• Bonneville from 2017 to 2020 with a VIN Lower than 513324. If you have a HIGHER VIN you should look for parts # RM30405 / RMS020-103436
• Street Triple Standard 2008 to 2017 This part will only fit on Street Triple Standard with a VIN higher than 456777. For models with a VIN BETWEEN 354282 and 456776, please refer to part # RM30104, and for models with VIN lower than 354281, please refer to OEM T1300570
• Street Triple 1994 to 2018: This part will only fit on Street Triple with a VIN higher than 499574 and a Non-ABS version or higher than 499957 and a ABS version. If you vehicle has a VIN between 210445 and 461331, please refer to OEM T1304045. If your vehicle has a VIN between 461332 and 499573 and a non ABS version, refer to OEM T1300165. If your vehicle has a VIN between 461332 and 499956 and an ABS version, refer to OEM T1301564. If your vehicle has a VIN BETWEEN 141872 and 210444, refer to part # RM30507 / RMS022-106230. If your vehicle has a VIN lower than 141871, please refer to OEM T1300021. If your vehicle has a carburator, please refer to part # RM31000.
• Street Triple 2019 to 2020 This part will only fit on Street Triple Standard with a VIN higher than 456777. For models with a VIN BETWEEN 354282 and 456776, please refer to part # RM30104, and for models with VIN lower than 354281, please refer to OEM T1300570
• Street Triple R 2008 to 2020 This part will only fit on Street Triple R with a VIN higher than 456777. If your vehicle has a VIN BETWEEN 354282 and 456776, please refer to part # RM30104.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The RAM-B-201U-C consists of a long double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 6", this is the longest B size RAM^® double socket arm size and adds more reach to your favorite mounting solution. The easy to adjust knob allows for near-infinite adjustability for your connected device.

Features:

• Provides an extended reach with an overall length of 6" and a socket-to-socket length of 5.31"
• Attaches to any B size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• PRODUCT DIMENSIONS: Overall Length: 6" (152.4mm)
• SOCKET-TO-SOCKET LENGTH: 5.31" (134.8mm)
• BALL SIZE: B Size (1", 25.4mm)

NOTE: RIGHT RADIATOR ONLY, FOR LEFT SEE WPRAD070L FOR PAIR SEE WPRAD070P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

Direct OEM replacement. Repair damaged or corroded wire connectors. Replace damaged electrical connectors within your machine's wire harness.

Fuel pump strainers act as a first line of defence against fuel system contamination. Strainers filter out common contaminants found in gasoline such as dirt, dust and other particulate matter, as well as gasoline varnish. Quantum fuel pump strainers feature multiple layers of strainer media to filter progressively smaller particle sizes. The expanded surface area provides enhanced filtration, extending the life of the fuel pump.

Restricted fuel flow through a clogged strainer causes the fuel pump to work harder, reducing pump longevity. Strainer clogging is among the top causes of fuel pump failure making it important to replace your strainer regularly - before problems arise. We recommend replacing fuel pump strainers in powersports applications once a year as part of a preventative maintenance plan.

Features:

• Designed with gradient density to meet or exceed OE specifications.
• Designed to ensure optimal filtration to prevent fuel system contamination.
• Strainer material tested and validated for capacity and efficiency by accredited third party.

NOTE: LEFT RADIATOR ONLY, FOR RIGHT SEE WPRAD063R FOR PAIR SEE WPRAD063P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

Hot Cams Steel Valves are designed as OEM replacements, precision-forged they are strong & durable. Machined head and seat surfaces provide a precise fit. Hot Cams valves are nitride coated and induction hardened valve stem tip provide longevity while a precision polished surface reduces friction resulting in less heat build-up. Hot Cams valves are compatible with all OEM valve keepers and are sold individually allowing you to keep your replacement costs down.

• Forged one-piece OEM replacement valves
• Precision machined valve head and seat surfaces
• Nitride coated
• Induction hardened valve stem tip
• Precision polished surface
• Compatible with OEM valve keepers
• Sold each

Specifications:

• Material: Stainless Steel
• Valve Head Outer Diameter: 30mm
• Valve Length: 84mm
• Valve Stem Outer Diameter: 4.970mm

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB011
  • Outer: WPAXCVB011
• Please confirm suitability for your year, make, and model prior to purchase.