T-Handles: Sockets & Spanners

The Whites Swingarm Nut Socket Wrench is an essential tool for the installation of the swingarm pivot insert, used for removing and replacing the lock nut on swingarm pivot shafts. Constructed with a 1/2" socket drive for easy use with ratchets and torque wrenches and a 32mm ID & 44mm OD. Manufactured from heat-treated steel for strength and durability.

• For removing/installing swingarm pivot lock nut
• 1/2" square socket drive
• 32mm ID & 44mm OD
• Manufactured from heat-treated steel
• Four 7mm wide grooves

The Whites ATV Pinion Bearing Nut Tool is a necessary item for removing the pinion gear bearing lock nut on the rear differential of Honda ATVs. Manufactured from cold rolled carbon steel for exceptional strength and durability. Constructed with a knurled finish for a better grip when operating by hand and a 1/2" square socket drive for use with a ratchet or torque wrench for accurate installation.

Removes/installs pinion bearing nut
Compatible with early Honda ATVs
1/2" square socket drive for use with torque wrenches
Cold rolled carbon steel construction
Knurled finish for better grip

Changing out the spark plug can be a real knuckle breaker without the right tool. The Whites Folding Long Reach Plug Spanner makes it easier to get a secure, tight fit on the plug to remove and replace.

The spanner can be reversed, offering both 10mm and 16mm sizing to fit a range of spark plugs, while the folding head pivots to allow better access and leverage for safer removal and installation of your spark plug.

Features:

• Zinc finish for durability.
• Reversible to fit spark plugs with 10mm and 16mm hex sizing.
• Folding head for easier access and safer operation.

The Whites ATV Pinion Bearing Nut Tool is a necessary item for removing the pinion gear bearing lock nut on the rear differential of the Kawasaki KVF series. Manufactured from cold rolled carbon steel for exceptional strength and durability. Constructed with a knurled finish for a better grip when operating by hand and a 1/2" square socket drive for use with a ratchet or torque wrench for accurate installation.

Removes/installs pinion bearing nut
Compatible with Kawasaki KVF series
1/2" square socket drive for use with torque wrenches
Cold rolled carbon steel construction
Knurled finish for better grip

The Whites Plug Wrench is a must-have tool for 4-cylinder Hondas with deep recessed spark plugs. This plug wrench allows you to reach down to those difficult spark plugs, compatible with most Hondas that use D7EA, D8EA and D9EA spark plugs. Constructed with a T-handle for easy operation and a 12mm threading and 18mm hex end.

Must-have tool for 4-cylinder Hondas with deep recessed spark plugs
Fits most Hondas using D7EA, D8EA and D9EA spark plugs
Constructed with a T-handle for easy operation
This fits spark plugs with 12mm threading and 18mm hex size

Make your maintenance and repair jobs quicker and easier with the Whites T-Handle Sockets. Perfect for those quick and easy to access nuts and bolts. No more slow operation with conventional spanners or having to constantly swap sockets, you'll never want to return to those old spanners. The perfect tool to have in the workshop, garage or at the track.

Constructed from high-quality chrome vanadium steel
Faster and easier than spanners
Great in the workshop, garage or at the track
Size: 12mm

Make your maintenance and repair jobs quicker and easier with the Whites T-Handle Sockets. Including 5 T-Handle sockets from 6mm to 14mm and a #2 Phillips socket, the set covers all common nut and bolt sizes on your bike, perfect for those quick and easy to access nuts and bolts. The miniature-sized T-Handle is great for your hydration pack for on the trail maintenance, with three different positions for you to mount your sockets, tailoring to the leverage required for the job.

• Deep socket design
• Constructed from high-quality chrome vanadium steel
• 6-piece mini T-handle set
• Faster and easier than spanners
• Mini size fits in your hydration pack
• Perfect for on the trail repairs
• Easy to fit in the toolbox for trackside maintenance and repairs
• Includes a #2 Phillips socket

Includes Sizes:

• 6mm
• 8mm
• 10mm
• 12mm
• 14mm
• #2 Phillips

Changing out the spark plug can be a real knuckle breaker, The Whites Extra Long Spark Plug Spanner makes it easier to get a secure, tight fit on the plug to remove or replace. Fits all 12mm spark plugs and is 120mm long. Zinc finish for durability.

• Fits all 12mm spark plugs and is 120mm long
• Easy to get a secure, tight fit on the plug for removal or replacement
• Zinc finish for durability

The Whites Stud Installation Tool Set aids in the fast and easy installation of threaded studs while preventing damage to the stud thread, ideal for installation of engine and exhaust studs. Including three different thread sizes all with a 3/4" (19mm) hex head and 5.5mm Allen key for easy operation. Constructed from industrial quality steel for strength and durability and a black oxide finish for corrosion resistance.

Ideal for engine and exhaust studs
Installs threaded studs without risk of damaging the thread
Operate using a 3/4" (19mm) spanner and a 5.5mm Allen key
Thread Sizes: M6 x 1, M8 x 1.25, M10 x 1.25mm

Built with a low profile design securing the socket to the nut and preventing rounding and slippage. Constructed from heat-treated chrome moly steel the sockets are strong and durable, provided in a convenient carry case for storability and portability. The perfect workshop companion for engine servicing.

Chromoly steel construction
Heat-treated
Low profile design
Convenient carry case
Great for any garage or workshop

Sizes Included:
1-5/8" with 3/4" drive
1-1/2" with 1/2" drive
1-3/8" with 1/2" drive
1-5/16" with 1/2" drive
1-1/4" with 1/2" drive

The Whites Swingarm Pivot Nut Tool is an essential tool for installation of the swingarm pivot insert, used for removing and replacing the lock nut on swingarm pivot shafts. Constructed with a 1/2" socket drive for easy use with ratchets and torque wrenches and a diameter of 50mm. Manufactured from heat treated steel for strength and durability.

For removing/installing swingarm pivot lock nut
1/2" square socket drive
50mm diameter
Manufactured from heat treated steel
Four 6mm wide grooves

The Whites ATV Pinion Bearing Nut Tool is a necessary item for removing the pinion gear bearing lock nut on the rear differential of Honda ATVs. Manufactured from cold rolled carbon steel for exceptional strength and durability. Constructed with a knurled finish for a better grip when operating by hand and a 1/2" square socket drive for use with a ratchet or torque wrench for accurate installation.

Removes/installs pinion bearing nut
Compatible with TRX Honda ATVs
1/2" square socket drive for use with torque wrenches
Cold rolled carbon steel construction
Knurled finish for better grip