WORKSHOP

Bobbins make fitting a rear paddock stand to your bike much easier and quicker. Frame Forks must be fitted to the rear paddock stand before bobbins can be used. Makes fitting a rear paddock stand to your bike much easier and quicker.

Features:

• Does not mark the bike's swing arm.
• The majority of bikes have pre-threaded holes in their swing arms to fit bobbins.
• Some bikes have uneven swing arms, making the use of bobbins the only way to safely fit a rear paddock stand.
• Size: M10 x 1.25 thread

Note: Consult your bike manufacturer for the bolt and thread size required for your bike.

Used in many different jobs, the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATVs, making Whites products your one-stop flywheel shop. Constructed from heat-treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

• Used for removal of the flywheel or rotor if applicable
• Premium quality high carbon steel
• Heat-treated for strength and durability
• Durable hot black oxide finish
• Thread Size: M26 x 1.5
• Thread Direction: Right Hand
• Type: Female (External Thread)

Every backcountry adventure-seeker needs a handful of these multi-purpose straps with virtually unbreakable fasteners. Each pair of stretch polyurethane Pronghorn Straps™ features stamped aluminum buckles sheathed for scratch protection with arrows that line up for easy fastening. Each buckle prong holds the strap in place for pre-fitting and easy chaining of straps together. Available in colour-coded 18-, 25- and 32-inch lengths and marked by size, you’ll find a million uses for Pronghorn Straps—motorcycle, sled, snow bike, 4×4, ATV, UTV/SXS—and so much more!

Features:

• Super tough stretch polyurethane.
• Stamped aluminium fastener, sheathed for scratch protection.
• Adjustable from 6.5″ to 22″
• Width 3/4″

A comprehensive 27 piece premium motorcycle tool kit. Ergonomic, soft gel handles which are comfortable to use. Chrome vanadium steel sockets, extension bar and hex keys for a durable life. A compact storage case, ideal to keep under your rear seat which folds down to 18.5cm x 10.5cm x 4cm. Mini ratchet handle with robust mechanism requires just 5 degrees movement to fasten. Includes a 20mm adjustable mini spanner, suitable for most sizes of bolts on a motorcycle

Includes:

• 10pc screwdriver bit set
• Adjustable mini spanner
• Extension bar
• 5pc hex key set (6mm, 5mm, 4mm, 3mm, 2mm)
• Mini wire cutters
• Screwdriver handle
• Mini needle nose pliers
• Mini ratchet handle
• 8mm, 10mm, 12mm, 13mm & 14mm sockets
• Cable ties (2.5mm x 100mm - black)

Compact and pencil-shaped, this portable gauge fits easily in your backpack. Perfect for quick checks on the trail. With a clear 5–50 psi reading range, it's simple to use, shock-resistant, and features an air pressure release button for precise adjustments. Reliable, rugged, and built for riders who demand accuracy on the go.

Features:

• Pencil shaped for portability, can be stowed in your backpack for use on the trails.
• Portable and easy to read.
• Simple to use.
• Shock-resistant.
• Air Pressure Release Button.
• 5-50 PSI reading.

Pin for the Whites Headstock Stand.

Oxford's new premium Paddock Stands are stronger and easier to use than anything that came before.

A compact frame construction makes them very rigid and very stable. At the same time, an elongated handle provides excellent leverage, so lifting your bike requires minimum effort.

Their powerful construction makes these stands suitable for the widest possible range of applications - from lightweight to big bikes - and rear stands come with both L-shaped cups for swing arms and forks for bobbins.

Features:

• Heavy duty steel clamps for maximum rigidity.
• Ultra-strong frame with compact construction with 38mm tubular steel frame.
• Extra torsional supports give increased rigidity.
• High-quality double wheels allow a smooth lift and maximum stability under load.
• Elongated handle design which helps give more leverage and a controlled lift.
• Both L-cups and Forks for bobbins provided for rear stands.
• Plasticated pins for fitting to front forks. One simple fitting system included.
• Two position adjustment screws ensure security and stability.
• Max load: 250kg

Note: For wheels up to 17 inches.

4 x spare pins for Oxford Chain Tool Pro.

4 x spare pins for Oxford Chain Tool Pro.

The Oxford Chain breaker and riveting tool is designed to break chains, press-fit connecting link plates and rivet pin heads.

Features:

• Suitable for 420 - 630 "X" and "O" ring chains.
• Precision made.
• Hardened steel construction.
• Easy to use.
• Carry case and instructions included.
• Spare pins available (OX177P).

The Oxford Chain breaker and riveting tool is designed to break chains, press-fit connecting link plates and rivet pin heads.

Features:

• Suitable for 420 - 630 "X" and "O" ring chains.
• Precision made.
• Hardened steel construction.
• Easy to use.
• Carry case and instructions included.
• Spare pins available (OX177P).

The Whites Inner Cam Bearing Removal/Installation Tool is the perfect tool for replacing/servicing cam bearings on all Harley Davidson Twin Cam 88 engines. The tool is designed to press on the outer ring of the bearing, eliminating damage to the bearing, cam or cases, while the press adaptor will set the bearing at its proper depth. The tool lines up with the bearing bore for a perfect fit every time, prevents pin rollers from the bearing falling into the crankcase and is compatible with both 7/8" and 1" I.D bearings.

Lines up with bearing bore for a perfect fit
Sets bearings at the correct depth
Prevents pins falling into the crankcase
Eliminates damage to the bearing, cam or case
Compatible with 7/8" and 1" I.D bearings
Supplied in a convenient case for manageable storage

This kit provides two chain adjusters, three wheel nut sockets and three front axle alignment tools. The chain adjuster helps you to turn the eccentric hub that tightens the chain, with a corrosion resistant 304 stainless steel construction. The front axle alignment tool helps you to install and maintain correct alignment of the front axle while the axle nut is being tightened with a lightweight corrosion resistant 6061-T6 aluminium construction. The 427-02 tool has a pin that is longer than another, the longer pin must be aligned to engage with the notch in the right-hand fork leg.

427-01 fits models that use a 30mm ID axle
427-02 fits models that use a 25mm ID axle
427-03 fits all Ducatis with Ohlins forks and a 25mm ID axle

Front and Rear Wheel Nut Socket:
408-01-01 has two sizes in one a 55mm 12pt for the rear and a 28mm 6pt for the front wheel
408-02 is a 46mm 6/12pt for the rear wheel
408-03 is a 41mm 6/12pt for the rear wheel

All sockets have a 1/2" socket drive and are constructed from 7075-T6 aluminium with black anodising.

Part of Oxford's Advanced Accessories range, the Oxford Airflow MT Mini is a foldable, space saving, mini track pump with built-in pressure gauge.

Features:

• Fits Presta and Schrader valves.
• Built-in pressure gauge.
• Aluminium barrel.
• Valve lock.
• Fold-out T-handle and foot pad.
• 20cm extendable hose.
• Carry bracket included.
• Max. Inflation: 140 PSI

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, Oxford's Garage Signs are also the perfect gift for the biker who's got it all!

Features:

• Indoor use only.
• Made from high quality coated metal tin plate with rolled edges.
• 4 x 3.2mm pre-drilled holes for attachment.
• Dimensions - 30 x 20cm x 0.25mm thick.
• Weight - 124g
• Different styles and mottos available.

A helpful tool to set open spring rear shocks for your Triumph, Norton or BSA motorcycle. It works on Dot shocks with a 1-7/8" diameter adjustment nut.

The Whites Top Dead Centre Tool allows you to find top dead centre fast and easily, simply rotate the engine and the piston will rise up the centre indicator. The perfect tool for engine rebuilds and when you are needing to find top dead centre. The tool can fit any 10 or 12mm spark plug hole and is constructed from 304 stainless steel for corrosion resistance and durability.

Stainless steel construction
Fits any 10 or 12mm spark plug hole
Find top dead centre quick and easy

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come. This 10 piece set is the perfect flywheel tool for your workshop, ensuring you have most of the market covered for engine servicing in one convenient kit.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish
Convenient carry case
10 piece kit providing 15 applications

Kit Includes:
M14 x 1.5
M16 x 1.5
M18 x 1.5
M19 x 1.0
M20 x 1.0
M22 x 1.0
M22 x 1.5
M24 x 1.0
M25 x 1.5
M26 x 1.0
M26 x 1.5
M27 x 1.0 (L/H Thread)
M27 x 1.25
M28 x 1.0
M28 x 1.5

All applications are right-hand threads excluding the M27 x 1.0 which is a left-hand thread.

Constructed from lightweight marine grade 6061 aluminium, the Whites Alloy Tailgate Folding Ramp is strong and durable while maintaining excellent corrosion resistance.

Weighing 10.2kg, it is portable while capable of withstanding weights up to 318kg. Rubber-coated fingers protect your loading surface and help prevent the stand from slipping.

Perfect for loading your motorbike, once loaded the ramp doubles as a tailgate preventing your gear from flying off the back of your ute.

Features:

• Marine grade 6061 aluminium construction.
• Rubber-coated fingers protect loading surface.
• Both ends fold for easy storage during transport.
• Perfect when transporting your bike using a ute.
• Suitable for both Road and Off-Road motorcycles.

Specifications:

• Dimensions: 222cm W: 35.5cm
• Folded: Folded: 120cm x 35.5cm
• Loading capacity: 318kg

Stronger and much safer than a bungee, Oxford's Atlas Straps are adjustable self-tensioning straps. Their extra strong, flat webbed design is easy to adjust to the desired length and the quick-release B-clip makes them simple to detach. The strap has an elasticated section which keeps the strap under constant tension providing a safer and more secure hold compared to regular solid straps.

With a multitude of uses, your gear will stay safe and secure with Atlas Straps.

Features:

• Extra strong construction.
• Durable elasticated straps.
• Quick-release premium buckle for extra durability.
• Adjustable length.
• Safe and secure.
• Anti-rust, anti-scratch, no sharp bungee hooks.
• Easy to use: attach, clip, tighten.
• Multiple uses: motorcycling, cycling, and outdoor leisure activities.
• Size options: 17mm or 26mm widths and 1.2m or 2.0m lengths.
• Available colourways: black, asphalt, lichen.
• 2 x straps per pack.

Warning:

DO NOT overstretch. Maximum stretch 50%. Always keep out of recoil path. Do not use if strap has any signs of damage. Check for damage before each use.

Introducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2009-2020 RSV4 & 2011-2020 Tuono V4.

Anyone who rides or repairs Aprilia’s motorcycles is probably familiar with the stator, flywheel, and sometimes voltage regulator issues common to these models. Most of these bikes will have had at least one stator fail in their lifetime so far. The main problem was extremely strong magnets were used on the original flywheels, creating a very high power stator output, which generated excessive heat. This usually resulted in burned-up, or shorted stator winding, and often in a failed voltage regulator.

The solution was a new flywheel from Kokusan with lower-strength magnets, dropping the stator output and heat generation. This results in a charging system output perfectly matched for the bike’s electronic needs and the long-term reliability of the stator and voltage regulator.

To prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a completely reliable heavy-duty charging system replacement kit for your Aprilia. Upgrade today if you haven’t already!

Included in this kit

• Heavy-duty Kokusan brand recall-type OEM flywheel
• Triple-tested heavy-duty stator
• Stator crankcase cover gasket
• Flywheel puller

With this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies

Features:

• Kokusan upgrade/recall type flywheel: Lower-strength magnets for correct stator output, low heat generation, and long-term reliability.
• Built to OEM size: Fits precisely in your ride: install it and forget it.
• Improved epoxy: Uses high-temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment
• High-grade steel capping: Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.
• Precise balancing: Eliminates crankshaft vibrations for longer engine longevity.
• Shop with confidence:
All products are tested. Don't waste time with temporary solutions, and start fixing your ride like a pro!

Specifications:

• Stator Dimensions:
• Interior diameter: 43 mm
• Exterior diameter: 105 mm
• Thickness: 13.8 mm
• Length of wires stator to grommet: 125 mm
• Length of wires grommet to plug: 320 mm
• Other specifications:
• Number of wires: 3
• Number of plugs: 1
• Number of pins: 3
• Alternator: Between each Yellow = 0.3 ohms +-20%
• Flywheel Dimensions:
• Exterior Diameter: 121 mm
• Interior Diameter: 107 mm
• Interior Diameter Center Housing: 19 mm
• Exterior Diameter Center Housing: 34 mm
• Thickness (exterior): 35.3 mm
• Thickness (interior): 31.65 mm
• Flywheel Puller:
• 36 mm x 1.5 right-hand male
• Length: 60 mm
• Exterior Diameter: 48 mm
• Interior Diameter: 35 mm
• Exterior Diameter Center Housing: 37 mm

Please note: There are two possible kits for the RSV4 engine. This kit ONLY fits RSV4 engine numbers HIGHER than 3413 with KOKUSAN flywheels. Please compare our flywheel to your original.

If your RSV4 engine number is LOWER than 3413, your motor uses the Mitsubishi flywheel and will need Stator Assembly 857201. Refer to kit RMS900104929.

The Whites Oil Filter Wrench Cup features a precision-stamped, deep reach cap-style that is engineered for a perfect fit. Constructed with 14 flutes and a 64mm diameter, along with a 3/8" square socket drive for use with a torque wrench or breaker bar. The heavy-duty steel manufacturing provides strength and durability while the black oxide finish prevents rust and corrosion.

Easily and safely removes hard to reach oil filters
Precisely engineered for strength and durability
Prevents crushing or damage to the oil filter
Removes stubborn oil filters with ease
Steel construction
Black oxide finish for corrosion resistance
3/8" square socket drive
64mm diameter with a 14 flute design

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat-treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat-treated for strength and durability
Durable hot black oxide finish

Thread Size: 35 x 1.5
Thread Direction: Right Hand
Type: Female (Internal Thread)

Applications:
Kawasaki: 4 cycle engine quad models, off-road M/C, street bikes, PWC models 900 ZX1/STX, 1100 ZX1/STX.
Suzuki: 4 cycle engine quad models, off-road M/C and street bikes models.
Yamaha: 2 and 4 cycle engine quads, most Rhino UTV Side x Side models.
Husqvarna: Fits most 610cc 4 stroke dirt bike models.
Honda: Fits some ATV 4 stroke quads, TRX250, TRX350, TRX450 models.
It also fits most early CAN AM motorcycles w/Bosch ignitions.

Australia's favourite tie down for over 25 years. Superior strength that exceeds Australia and NZ standards.

Features:

• 38mm fray-resistant UV-stabilised high-tensile polyester webbing.
• 375 kg lashing capacity.
• Soft loop upper extension built in.
• Carabiner snap lower hook for secure fastening.
• High resistance to breaking.
• UV stabilized.
• Powder-coated steel hooks.
• Aluminium carabiner.
• Total length: 183 cm

Motorcycle gear weighs so much more than regular clothes - especially leathers - that it destroys regular hangers in no time.

The Zero-G Heavy Duty Hanger is designed to handle the weightiest riding kit, made entirely made from heavy gauge steel.

It comes with integral trouser hooks, so will keep ALL your gear hung up neat and tidy between rides.

Perfect for use with the Zero-G Gear Tidy.

Key Features
• Heavy duty hanger for motorcycle riding kit
• Integral trouser hooks
• 360° rotating hanger hook
• Use in combination with the Zero-G Gear Tidy (OX693) storage system
• Durable steel construction
• Max load 25kg

These Trail Tech Kickstands are designed for off-road motorcycles. They are durable, lightweight, and easy to use, keeping your motorcycle upright on any terrain. Made from forged 7075 aircraft-grade aluminium, Trail Tech Kickstands have the strength to endure the harshest conditions.

Specifications:

• Forged 7075 aircraft-grade aluminium.
• Matte black surface.
• Machined cutouts.
• Model-specific brackets.

Reasons to purchase a Trail Tech Kickstand:

• Model-Specific: Trail Tech Kickstands are available in various sizes and styles to fit different makes and models, ensuring compatibility with a wide range of motorcycles. They come equipped with a large foot, which helps prevent the kickstand from sinking into soft soil or sand.
• Easy to Install: Trail Tech Kickstands are engineered for simple installation. Only basic tools and minimal mechanical knowledge are required for quick installation.
• Durable and Reliable: Trail Tech Kickstands are built to last from high-quality materials. They are designed to withstand the rigours of off-road riding.
• Convenient and Versatile: Trail Tech Kickstands make it easy to stop and dismount your bike on any terrain or surface. Whether pausing for a quick break or setting up camp for the night, the kickstand provides stability, allowing you to focus on enjoying your ride.
• Lightweight and Compact: Trail Tech Kickstands won't add unnecessary weight or bulk to your bike.

Disclaimer:

Trail Tech Kickstands are intended for motorcycles with OEM equipment. Altering a bike with aftermarket wheels, suspension, or street tyres can change a motorcycle's ride height and proper lean angle when parked. Please consider this when purchasing.

The Whites Deluxe Spoke Wrench Kit is a convenient kit of 10 different-sized spoke wrench heads. The kit includes a bar that the heads screw into for quick and easy maintenance, perfect for the motorcycle enthusiasts' garage and professional workshop. O-rings are included to prevent the heads from over- tightening and seizing onto the bar and the kit is provided in a space-saving carry case, no more digging through your toolbox for the correct spoke spanner.

Features:

• Great for a workshop or home garage use.
• Includes bar, 10 spoke wrench heads and o-rings.
• Provided in a convenient carry case for simple storage.
• Sizes included: 5.0, 5.2, 5.4, 5.6, 5.8, 6.0, 6.2, 6.4, 6.6 and 6.8mm
• Storage case size: 150 x 105 x 25mm

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

Wrench for removing front fork cap
Made of durable steel
Closed end for easy operation
Size: 24/32/41mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

The CapStrap open axle tie-down system is designed for BMW motorcycles with 5.3cm hollow axles. The system ensures your motorcycle stays perpendicular and in place wherever you take it.

This innovative tie-down system makes clever use of one of BMW’s technical features. Using the swingarm’s open axle construction, the CapStrap open axle tie-down system protects the bike’s suspension system from excessive tie-down pressure. The tie-down Strap is rigged through the middle of the axle, ensuring minimal obstruction from the bike’s exhaust pipe and luggage bags.

The CapStrap comes complete with a ratchet and Strap and is very easy to use. The Strap is made from high-quality ABS material; this supple material protects the bike’s lacquer and aluminium frame from scratches, dings, and other possible damage. The CapStrap is very easy to use, allowing you to mount it in an instant. The Strap is 135 cm long and can be tightened with the ratchets that come with the set.

Features:

• No load on your suspension systems.
• Easy to use.
• High-quality ABS material to prevent scratching.
• Minimal interference with your exhaust or your bike cases.
• Comes with a handy carrying bag, ratchets and straps.

The Whites Sock Compression Adjuster Removal Tool allows easy removal of the rear shock compression adjuster.

Note: The punch marks at the threads must be drilled 1mm deep prior to removal.

The Whites Swingarm Nut Socket Wrench is an essential tool for the installation of the swingarm pivot insert, used for removing and replacing the lock nut on swingarm pivot shafts. Constructed with a 1/2" socket drive for easy use with ratchets and torque wrenches and a 32mm ID & 44mm OD. Manufactured from heat-treated steel for strength and durability.

• For removing/installing swingarm pivot lock nut
• 1/2" square socket drive
• 32mm ID & 44mm OD
• Manufactured from heat-treated steel
• Four 7mm wide grooves

Whites Motorcycles Products presents our new 002 Aluminium Folding Ramp

• Featuring an all aluminium designed light weight 7kg ramp.
• Constructed with 6061 alumium resulting in a strong 340kg load capacity.
• Measuring 2.26m in Length with a Width of 30.5cm.
• Folds to an easy to store or transport length of 1.16m.
• Suitable for both Road and Off-Road motorcycles.