WORKSHOP

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, Oxford's Garage Signs are also the perfect gift for the biker who's got it all!

Features:

• Indoor use only.
• Made from high quality coated metal tin plate with rolled edges.
• 4 x 3.2mm pre-drilled holes for attachment.
• Dimensions - 30 x 20cm x 0.25mm thick.
• Weight - 124g
• Different styles and mottos available.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M38 x 1.5
Thread Direction: Right Hand
Type: Female (Internal Thread)

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M27 x 1.0
Thread Direction: Left Hand
Type: Male (External Thread)

Extend the life of your fork seals and reduce stress on your fork springs with the Whites Fork Seal Savers. The seal saver prevents over compression of your front end by bridging the gap between your tyre and front mudguard, designed with a curved bottom to prevent damage to your tyre and tube and also gives a firmer hold for your tie downs. The seal savers also stop your forks from compressing further while in travel, which can cause your tie downs to pop off and your beloved ride toppling over.

Features:

• Curved mount matches the tyre to prevent denting into the tyre and damaging your tube, tyre and rim.
• Prevents premature damage to your fork springs and seals from continuous compression.
• Stabilises the bike and prevents tie downs from popping off when on bumpy roads.
• Rubber top prevents slipping and damage to the mudguard.
• Adjustable height for the perfect fit for your ride.
• Aluminium construction provides additional strength and durability
• Dimensions (mm): 210 x 175 x 100
• Adjustable Height Range (mm): 210 - 285
• Colour: Blue

The MotoPressor Dial Tyre Gauge has an easy to read, 40mm dial with both PSI and Kpa graduations up to a maximum of 60PSI and 400Kpa.

This model has a straight stem and will hold the reading when removed from the valve stem, plus it has a bleeder/reset button.

The Whites Wheel Balancer is the ideal tool for both personal garages and professional workshops. Perfect for balancing, lacing, and truing wheels, it offers exceptional value.

Features:

• Centre shaft with wheel-centring cones and four roller bearings to reduce friction for precise balancing.
• Portable stand with adjustable frame rails accommodates wheels up to 12 1/2" wide.
• Durable, rust-resistant coating.
• Adjustable rim pointer for accurate wheel truing.
• Adjustable legs with bubble level for precise alignment.
• Static balancer suitable for all modern motorcycle wheels, front or rear.

Specifications:

• Suited for rims: 10" to 21".
• Adjustable frame rails for wide wheels up to 12 1/2" wide.
• Rod diameter: 12mm.
• Largest cone point: 31mm, made from machined aluminium.
• Mounting options: Adjustable centring cones or rod on ball bearings.
• Four high-quality roller bearings ensure friction-free operation.

The Whites Shock Preload Adjusting Tool is the perfect tool for adjusting your shock preload on motorcycles or ATVs with an 80mm shock spring collar. Eliminate the risk of damaging your shock and collars with a screwdriver and hammer and use this Whites tool made for the job. Constructed from carbon steel for strength and durability ensuring it will last for many shock adjustments to come.

Helps to adjust the preload spring collars without damage
Carbon steel construction
Easily adjusts single shock pre-load rings
Eliminates the hammer and punch method
Size range: 80mm

Adjust the height of your vehicle with ease. Weight limit up to 1100lbs / 498kg.

• Deck Size: 440mm x 150mm
• Max Height - 400mm
• Min Height - 90mm

Note:

Please ensure the worm drive in this unit is kept lubricated with a high- quality high-pressure grease, at all times.

Rear lifting cups for use with Zero-G Lite, Zero-G and Paddock Stands.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M28 x 1.0
Thread Direction: Right Hand
Type: Male (External Thread)

The Whites Sock Compression Adjuster Removal Tool allows easy removal of the rear shock compression adjuster.

Note: The punch marks at the threads must be drilled 1mm deep prior to removal.

The Whites Front Wheel Chock 4 is ideal for your road bike when cleaning, storing, transporting or performing repairs/routine maintenance. Constructed with an innovative swivel cradle, mounting your bike is hassle-free. The chock is compatible with 16-18 inch wheels with a 110-130mm width tyre, while the rubber feet prevent the stand from moving when putting the bike in place. Manufactured from heavy- duty steel tubing, the chock is strong and durable and complete with a thick red powder coat for a great look and corrosion resistance.

Features:

• Stabilises the bike when cleaning, storing or transporting.
• Easy-to-use, innovative swivel wheel cradle.
• Compatible with 16-18" wheels with 110-130mm width.
• Rubber feet prevent the chock from sliding on most surfaces.
• Heavy-duty steel tubing construction.
• Complete with a thick red powdercoat.

Provides a simple way to remove the bearing race on your steering stem. Insert the tool into the stem and open it until it is tight against the stem. From the other end tap the tool out and it will pull the bearing race with it. Suitable for steering head races sized 25-40mm. The hardened steel construction and black oxide coating ensure longevity and corrosion resistance.

Suits races with 25-40mm diameter
Hardened steel construction
Prevents damage to the steering stem
Black oxide coating prevents corrosion

Stronger and much safer than a bungee, Oxford's Atlas Straps are adjustable self-tensioning straps. Their extra strong, flat webbed design is easy to adjust to the desired length and the quick-release B-clip makes them simple to detach. The strap has an elasticated section which keeps the strap under constant tension providing a safer and more secure hold compared to regular solid straps.

With a multitude of uses, your gear will stay safe and secure with Atlas Straps.

Features:

• Extra strong construction.
• Durable elasticated straps.
• Quick-release premium buckle for extra durability.
• Adjustable length.
• Safe and secure.
• Anti-rust, anti-scratch, no sharp bungee hooks.
• Easy to use: attach, clip, tighten.
• Multiple uses: motorcycling, cycling, and outdoor leisure activities.
• Size options: 17mm or 26mm widths and 1.2m or 2.0m lengths.
• Available colourways: black, asphalt, lichen.
• 2 x straps per pack.

Warning:

DO NOT overstretch. Maximum stretch 50%. Always keep out of recoil path. Do not use if strap has any signs of damage. Check for damage before each use.

The Whites Dry Charge Battery Filler provides a safe, fast and tidy way to fill dry charge batteries. Avoid spilling, and burning of yourself or clothing. Compatible with any standard acid pack tube, with a simple thumb release valve control for acid flow. Featuring a cell-eye to indicate when the battery is full. Can also be used in vehicles and batteries with big openings without rubber adaptor.

Fast and safe way to fill dry charge batteries
Prevents spilling acid and burning yourself
Compatible with any standard acid pack tube
Cell-eye indicates when the battery is full

Lifting pins for the ZERO-G Single-Sided Paddock Stand (OXOX266)

We all know how hard it is to get those “straight” chucks onto our motorcycle tyres. This chuck will fit most air hoses. If it doesn't screw directly onto the hose you are using, you will have to buy an adapter available at most plumbing supplies.

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, Oxford's Garage Signs are also the perfect gift for the biker who's got it all!

Features:

• Indoor use only.
• Made from high quality coated metal tin plate with rolled edges.
• 4 x 3.2mm pre-drilled holes for attachment.
• Dimensions - 30 x 20cm x 0.25mm thick.
• Weight - 124g
• Different styles and mottos available.

The Whites Oil Filter Wrench is the ideal tool for removing and installing spin-on oil filters with a 76mm diameter. The tool enables you to quickly and simply remove and install spin-on filters. Constructed with a 24mm external hex head and 1/2" square socket drive for use with a spanner, ratchet or torque wrench for accurate installation and manufactured from lightweight 6061 aluminium.

For installation and removal of spin-on oil filters
24mm external hex head and 1/2" square socket drive
6061 aluminium construction
76mm diameter

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, Oxford's Garage Signs are also the perfect gift for the biker who's got it all!

Features:

• Indoor use only.
• Made from high quality coated metal tin plate with rolled edges.
• 4 x 3.2mm pre-drilled holes for attachment.
• Dimensions - 30 x 20cm x 0.25mm thick.
• Weight - 124g
• Different styles and mottos available.

The Whites Top Dead Centre Tool allows you to find top dead centre fast and easily, simply rotate the engine and the piston will rise up the centre indicator. The perfect tool for engine rebuilds and when you are needing to find top dead centre. The tool can fit any 14mm spark plug hole and is constructed from 304 stainless steel for corrosion resistance and durability.

Stainless steel construction
Fits any 14mm spark plug hole
Find top dead centre quick and easy

Available in four different tyre size configurations and three preset temperature settings, the Whites D3 Tyre Warmer is perfect for your pit tyre warming requirements. The three-switch system allows the functionality of a digital system but at the price of an analogue tyre warmer. The front and rear warmers have independent switches so you can dial in the perfect settings for your ride.

Features:

• Three temperature settings (Low, Medium, High).
• CE-approved.
• Digital functionali at an analogue price.
• Independent front and rear settings.
• Low 60 degrees Celsius (Good for Wet weather).
• Medium: 80 degrees Celsius (Good for Slick tyres and good weather).
• High: 95 degrees Celsius (Good for Slick tyres and good weather).
• Front Tyre Size: 90
• Rear Ty Size: 120-125
• Colour: Black

The ideal tool when setting valves with shim type adjustment. The Whites Valve Shim Tool compresses the valve shim bucket for easy removal of the valve adjustment shim, allowing you to adjust the valve clearance on your ride. Hardened alloy steel construction for exceptional strength and durability.

For adjusting valve clearance on twim-cam models
Holds valve spring bucket down so adjusting shims can be removed
Constructed of hardened alloy steel

Whites Combo Tyre Levers are the perfect addition to your trackside toolbox, enabling quick & easy tyre changing. A 32mm spanner end is used to loosen the axle nut for removal of the wheel while the spoon-type tyre lever end allows quick & easy tyre changing.

• Tyre spoon end makes for easy tyre changing
• 32mm spanner end for quick & easy axle removal
• 240mm forged alloy lever
• Lightweight for easy toolbox transportation

Brand new aftermarket Stator + Red Machined Aluminum Mosfet Regulator Kit

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator

• Highest-grade lamination materials
• Highest-grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included

Machined Aluminum Mosfet Regulator

Our new red machined aluminum Mosfet voltage regulator is a great upgrade for heat dissipation in any power sports charging system. After 10 minutes of use, our billet aluminum heatsink runs cooler by 33% than standard cast regulator housings. Our new red regulator, equipped with the renowned Mosfet regulation technology, is an added value to any three-phase permanent magnet charging system.

STOP BURNING YOUR REGULATOR RECTIFIER!
It is time to update or replace your voltage regulator with the advanced MOSFET type.
It runs cooler than all OEM diode-style regulators. In addition, this rectifier has to overheat protection, rather than burn up, it will simply turn off for a while and cool off.

• The quality exceeds the OEM equipment
• Improved heat sink and charging capabilities
• Higher-grade electric components

We have even included the opposite connector (main harness side) as we know these are often melted/ corroded/ defective and a major cause of repetitive electrical issues.

Why use Mosfet Enhanced technology?

• Runs cooler: Runs much cooler than the traditional Shunt voltage regulator rectifier.
• Saves gas: Less load on the stator, less work, less fuel is used and you save.
• Regulated energy: The power charging your battery is steadier and smooth
• Extended battery life: Extends the battery’s life and cold-cranking capacity
• More engine power: Removes stator load resulting in more engine power
• Optimized power: Optimize power delivery by switching the stator coils on or off.

Specifications:

• Dimensions Stator:
• Interior diameter: 42 mm
• Exterior diameter: 105 mm
• Thickness: 20 mm
• Length of wires stator to grommet: 160 mm
• Length of wires grommet to plug: 950 mm
• Length of pickup coil's wire to grommet: 90 mm
• Other specifications:
• Number of wires: 5
• Number of plugs: 3
• Number of pins: 5
• Wire-to-wire resistance:
• Alternator: White between each White = 0.6 ohms +-20%
• Pickup: Green to Blue = 500 ohms +-20%
• Dimensions Red Machined Aluminum Mosfet Regulator (CNC):
• Width: 103 mm
• Length: 103 mm
• Height: 28 mm
• Fixation holes center to center: 80 mm
• Other specifications:
• Number of plugs: 2
• Number of pins: 5
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: 15 V
• Operation Temperature: -20°C to 85°C

Extend the life of your fork seals and reduce stress on your fork springs with the Whites Fork Seal Savers. The seal saver prevents over compression of your front end by bridging the gap between your tyre and front mudguard, designed with a curved bottom to prevent damage to your tyre and tube and also gives a firmer hold for your tie downs. The seal savers also stop your forks compressing further while in travel, which can cause your tie downs to pop off and your beloved ride toppling over.

Curved mount matches tyre to prevent denting into the tyre and damaging your tube, tyre and rim
Prevents premature damage to your fork springs and seals from continuous compression
Stabilises bike and prevents tie downs popping off when on bumpy roads
Raised top reduces surface contact preventing damage to front mudguard
Crossbar holds seal saver in place when loading your ride
Plastic construction is lightweight and durable for easy transportation and extended life

Dimensions (mm): 293 x 231 x 98
Colour: Black

The Torque Mighty 15 Folding Multi-Tool includes 15 chrome vanadium tools. It has laser-etched graphics and lightweight 6061 aluminium sides.

Key Features:

• 2, 2.5, 3, 4, 5, 6, 8mm Hex keys.
  
  
• T25 Torx key.
  
  
• No.2 Cross head screwdriver.
  
  
• No.5 Flat head screwdriver.
  
  
• Chain tool.
  
  
• 14G, 15G, 16G, Mavic M7 spoke keys.

The Whites Crankcase Separator Tool fits most 2 and 4-stroke engines with vertically split cases. It allows a multitude of bolt patterns to be used and eliminates binding under heavy loads. The kit includes both 6mm and 8mm mounting bolts and the crankcase separator centre bolt with a 24mm hex head for use with torque wrenches and socket sets. The Whites Crankcase Separator Tool is perfect for splitting cases with ease while preventing unnecessary damage.

Slides in fingers allow multiple patterns for almost all models
Includes both 6mm and 8mm mounting bolts
Both 6mm and 8mm bolts are 200mm long
24mm hex head centre bolt