CLEARANCE

Replacing the fuel tank seal or gasket is a vital part of the fuel pump replacement process. Quantum tank seals are made exclusively from Viton, which are impervious to ethanol and other chemicals that degrade conventional rubber over time. These OE replacements are designed for fitment on specific vehicles.

Siskiyou Panniers combine the convenience of top-loading hard panniers with the performance benefits of Giant Loop's world-travelled soft luggage. Constructed with flexible, impact-resistant, and waterproof materials, Siskiyou Panniers deliver the ultimate lightweight, rugged, and compressible gear-packing solution for on- and off-road motorcycle adventures. Choose the Siskiyou Panniers for multi-day rides when quick, top-loading gear access is a priority.

The Siskiyou Panniers are designed to securely attach to most stock motorcycles equipped with both passenger footrest brackets and a rear rack and/or passenger grab bars, including many adventure touring bikes with no racks. Side luggage racks may be required for some motorcycle makes or models lacking sufficient support.

The panniers feature an adjustable width and attach with a stable, secure, three-point mounting system. Mounting points attach to both sides and the rear of the motorcycle — webbing straps anchor the sides, and heavy-duty Velcro anchors to the rear.

Features:

• Provides 70 litres (4,270 cubic inches) of packable volume (35 litres per side).
• Included set of two seam-sealed waterproof inner liner Dry Pods™ keep gear dry and organized.
• Top loading for easy access to 70 litres of storage, including mesh pockets under lids.
• Waterproof: Made from rugged Bomb Shell™ materials with double reinforced ballistic nylon impact zones constructed to be completely waterproof, mudproof, snowproof, and dustproof when used with included Dry Pods™.
• Multiple lash points to add a Rogue™ or Tillamook™ Dry Bag for expanded capacity (available separately).
• Two large, bellowed pockets fit 2-litre fuel bottles.
• Reflective accents for enhanced visibility.
• Includes two Hot Springs Heat Shield™ kits for rackless mounting on compatible motorcycles.

Specifications:

• VOLUME: 70 liters (35 liters each side)
• DIMENSIONS: 40.64cm x 30.45cm x 15.24cm (16" x 12" x 6")
• WEIGHT: 4.54 kg (with all included components)
• MAXIMUM WIDTH: 20" (with crossover adjustment; can be rack mounted without crossover)
• MATERIALS: Waterproof coated polyester tarpaulin, reinforced with ballistic nylon
• DETAILS: Reflective trim, drain grommets in exterior pockets, rugged fasteners (including Duraflex® buckles and stainless steel GL Mounts)

The Linklock SL offers an excellent compromise between the solidity of a U- Lock, the flexibility of a chain lock, and the compact portability of a cable lock.

The Linklock SL has a key replacement service. When you buy your Linklock SL, simply note down the number which comes attached to the keys on a metal tag. Keep this in a safe place, then in the event that you are unfortunate enough to lose all your keys, it will be possible to get a new key made up for you.

This Linklock SL has undergone rigorous independent testing and has Sold Secure Bicycle BRONZE.

Features:

• Convenient folding design.
• Uses six 5mm x 225mm hardened steel plates.
• 1000mm perimeter length.
• Quick release carry bracket bolts or straps to the frame.
• Three keys included.
• Replacement key service (type 10).
• Patented 'Ultra B' anti-drill, anti-saw, anti-pick lock cylinder.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

NOTE: This Vertex Oil Seal Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include all oil seals necessary to rebuild the engine and transmission including crankshaft, output shaft, water pump, clutch, and shifter seals.

The RAM^® Magnetic Power Plate^™ III is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets, a composite cradle, and one adhesive metal plate. To mount your device to the magnet, you will need to attach the metal plate to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm metal plate with adhesive back.

Features:

• Designed to hold a range of devices including radar detectors; rectangular metal plate attaches to the back of your device
• Magnetic plate features adhesive, two powerful magnets, and cradle
• Made of high-strength composites for durability and reliability in the most demanding environments

Specifications:

• HOLE PATTERN: 4-Hole AMPS: 1.181" (29.9mm) x 1.496" (37.9mm)
• PLATE SIZE: 3.13" (79.5mm) x 4" (101.6mm)

Hardware Included:

• x1 50mm x 38mm Steel Adhesive Plate
• x2 Rare Earth Magnets
• x4 #6-32 x 1/2" Machine Screws
• x4 #6-32 Nylock Nuts

Quality top cover gasket for various Sea-Doo models.

The RAM-HOL-UN7-400U consists of the small Tough-Claw^™ base and universal X-Grip^® cradle. The X-Grip^® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip^® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The X-Grip^® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Features:

• Small version of the RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface
• Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use
• Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments

Specifications:

• HOLDER DIMENSIONS:Width Range: 1.75" (44.4mm) - 3.25"(82.5mm), Depth Range: 0.875" (22.2mm)max
• CLAMP RANGE: 0.625" (15.8mm) - 1.14" (28.9mm) diameter
• BALL SIZE: RAM Snap-Link (3/4")

Hardware Included:

• x1 Optional Tether
• x1 Glue Tube for Rubber Caps

The Oxford Marineproof Padlock range is manufactured from the highest quality materials, made from 304 grade stainless steel, making them ideal for use in marine environments. They have been tested to over 1,000 hours in an environmental chamber with high humidity and salt spray and offer high levels of reliability in the harshest conditions.

Quality and performance can be assured with a five-year warranty along with a host of other features, including a double-locking mechanism and anti-drill cylinder shield. The Oxford MARINEPROOF range offers the ultimate marine-grade padlock for protecting your valuables.

Features:

• Marineproof — highly corrosion resistant.
• 50mm S304 Stainless steel lock body and cylinder components ensure long operating life.
• Anti-drill cylinder.
• 3 keys and replacement key service.
• Ideal for lockers and hatches.
• 5-year warranty.
• LK361: The mid-size padlock in the range and with its 9mm shackle it has been designed to work with a chain for securing gates, jet skis, kayaks and anything you can get a chain around!

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Torque Long Handle Hex Key wrench.

Key Features
• Resin grip
• Ball end

Oxford 12v cigarette lighter accessory plug.

Key Features
• Plug in an SAE-powered accessory or charger without connecting directly to the battery.
• No need to remove the motorcycle seat to access the battery.
• Cable length: 0.5m (OXEL106) or 3.0m (OXOF704).
• Connector: USA/SAE (OXEL106) or Standard (OXOF704).
• Suitable for up to 5amps.

Giant Loop Pannier Pockets are the minimalist version of tank panniers that expand front-of-bike storage while staying out of the rider’s way.

Pannier Pockets integrate seamlessly with the harness on Giant Loop’s Fandango and Diablo Tank Bags or can be mounted independently with an included webbing strap.

Connect them across the middle with the sides strapped to tank, shrouds, or engine guards with a Buckin’ Roll Tank Bag installed. An incredible value for a Made in USA lifetime product.

Features:

• Two 2-litre pockets for a total of 4 liters of packable volume.
• Rugged 22 ounce Bomb Shell™ vinyl coated fabric.
• Mil-spec materials and hardware with multiple webbing MOLLE-style daisy chains.
• Water-resistant YKK zippers.
• Made in the USA.

Specifications:

• Volume: 4 litres total volume (two 2-litre pockets)
• Dimensions: 25 cm L x 9 cm W x 11 cm H

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Replacing the fuel tank seal or gasket is a vital part of the fuel pump replacement process. Quantum tank seals are made exclusively from Viton, which are impervious to ethanol and other chemicals that degrade conventional rubber over time. These OE replacements are designed for fitment on specific vehicles.

The RAM® Tough-Claw is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The large version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from 1" to 2.2" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bicycles and motorcycles, or even on kayak rails and roll bars, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.

Features:

• Large version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from 1" to 2.2" in outer diameter; rubber pads provide stable gripping and protection of mounting surface
• Ideal mounting base for phones, tablets, cameras, rod holders, and much more; includes 1" B size rubber ball for attachment to RAM® double socket arms
• Made of high-strength, glass-filled nylon with corrosion-resistant, stainless steel hardware for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

Product Dimensions

• Overall Height: 5.94"
• Overall Width: 2.25"

Clamp Range: 1" - 2.2" Diameter

Ball Size: B Size (1")

Weight Capacity

• Standard Use: 2 Lbs
• Heavy-duty Use: 1 Lb
• Materials: High Strength Composite

Packaging Type: Poly Bag

Weight: 1.05 Lb

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

The CLIQR Universal Handlebar/Stem Mount is a multi-use mount that can be fitted in hard-to-reach areas, as well as on multiple diameter tubes. It offers a low-profile mounting system using cable ties and a 3M pad.

What's included:

• 2x Cable Ties
• 2x Device Adaptors
• 1x Silicone Pad
• 1x 3M Security Pad
• 1 x Alcohol wipe

The CLIQR Pivot Arm Converter can be used with any other CLIQR mount, to offer our most convenient fit with 360 degrees of rotation.

What's included:

• 1 x Pivot arm
• 1 x 3M™ VHB adhesive pad
• 1 x Alcohol wipe

Built for the harshest environments and virtually indestructible, these multi-use Cinch Straps pair perfectly with Giant Loop’s Revelstoke Dry Bag and Armadillo Bags. They’re a cinch to use, and a problem solver on any adventure.

For larger gear, these simple, tough, 1-in. wide webbing Cinch Straps with polished aluminum thumb lock fasteners tightly cinch down loads up to 48” in circumference. Reflective tabs enhance visibility and safety. 

Specifications:

• Polished aluminum Duraflex Tensionlock
• Total Length: 52 in. / 132 cm.
• 1-in. Nylike webbing
• Weight: 1 oz. each
• Reflective tab with GL logo

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

REPLACEMENT WIRING LOOM FOR THE OXFORD V9 EVO ATV HOT GRIPS

Replace your standard indicators with these beautifully crafted, miniaturised, high-performance components. A battery of high-intensity Light Emitting Diodes (LEDs) puts basic, low-wattage bulbs in the shade.

As well as their bespoke design and enhanced performance, Oxford Eyeshot LED Indicators boast a much longer life span than conventional bulb-lit indicators, so you can spend more time enjoying your bike and less time maintaining it.

Features

• Unique Oxford design
• Super bright LEDs
• Sealed for life
• Weatherproof design
• 2 x resistors included
• Sold as a pair
• Size: 49mm(L) x 22mm(W) x 20.4mm(H)

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit.
• Plug-and-play, direct fit, easy installation.
• No assembly required
• Higher grade of electric components.
• Improved heat sink and charging capabilities
• The quality exceeds the OEM equipment

RM STATOR has even included the opposite connector (main harness side), as they know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.