All Products

Oxford's Aqua Bags are one of the easiest ways to get your gear from A to B, safe and dry. They are made from tough PVC tarpaulin, which is welded to form waterproof seams.

Features:

• 12-litre capacity waterproof backpack.
• Waterproof roll-top closure.
• Phyzibility - 360-degree reflective detailing.
• 2 x Air Mesh padded panels for greater air circulation and comfort.
• Water-resistant zipped external pocket.
• Wipe-clean, waterproof construction with welded seams.
• Reflective webbing loop for tail light attachment.
• Adjustable chest strap.
• Longer length straps for improved comfort when riding.
• Carry handle.

Approximate size when filled:

• 40cm (H) x 24cm (W) x 12cm (D)

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The S3 sintered compound is optimal in dry and wet conditions for road and off-road motorcycles. In road applications, S3 pads are suitable for both the front and rear brake while in off-road applications, the S3 is only recommended for the front brake.

The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives that are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient.
• Minimal difference between wet and dry braking performance.
• Good abrasive resistance.
• Low abrasive interaction with the brake rotor material.
• Longer life compared to organic and Kevlar composite materials.

Application:

• For riders who demand a bit more than average from their bikes.
• Recommended on both front and rear brakes (road application).
• Can also be used on the front brakes of off-road bikes and ATVs.
• Works well on both dry and wet conditions.

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufactures sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials. These materials allow less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads, providing additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

About GOLDfren

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

Designed to keep your differential in top condition, this kit includes high-quality seals that prevent leaks and protect against dirt, water, and debris. Easy to install and compatible with a wide range of ATV and UTV models, this differential seal kit provides a cost-effective solution to prevent costly repairs and downtime. Fit these and have peace of mind.

Features:

• Double lip type TC seals.
• Front or rear position sold separately.

Note: Contains seals only. Verify fitment before purchasing.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

Don't leave home without this powerful and high-quality lithium Jump pack from Motobatt. Featuring quality plug connections to high-voltage clamp leads, ultra-reliable and sound connections.

800A peak current will have your Vehicle or Motorcycle starting in seconds. This little beauty is a must-have for the trail or the road. It can be charged from a standard USB power outlet.

Features:

• Jump Start - 12V Vehicles (motorcycle or car).
• 5V/2.1A USB Output - Charges smartphones, tablets and more.
• LED Flashlight - 3 modes:
• Illumination
• Strobe
• SOS
• Built-in protection - For overcharging and over-discharging.
• Charge indicator - Quickly view charge levels.
• Automatic power On/Off - When not in use.
• Copper jumper clamps.

Specification:

• Start Current: 400A.
• Peak Current: 800A.
• Battery Capacity: 7500mAh.
• Dimensions: 154 x 80 x 27mm.
• Weight: 300g.
• Input: 5V/1.5A
• Output: 5V/2.1A (device), 12V (vehicle jump start).
• Operation temperature: -20c to 60c
• Full charging time: 6 hours

Includes:

• 1x Jump Starter – Jump Starter / Personal Power Supply Unit
• 1x 3-into-1 USB Cable – Type-C, Micro USB, Lightning
• 1x Mini Jumper Clamps – Plugs into Micro-start for Jump Starting
• 1x USB-A to USB-C Charging Cable
• 1x Hard Case

About Motobatt

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

• Kit contains all of the components to re-seal leaking master cylinders
• Kit includes copper washers, spring, snap ring, replacement screws where applicable, cup seals, boot, and O-rings
• Applications:
  • Kawasaki H2 SX 19-20
  • Kawasaki H2 SX SE + 21

Hot Cams specializes in dirt bike, ATV and UTV high-performance camshafts.

Powersports enthusiasts have relied on Hot Cams for adrenaline-rush performance for over a decade.

• 9. 48mm Complete shim kit 1. 20-3. 50mm in . 05mm increments with 3 shims in each size
• Perfect for all your valve maintenance needs.
• Forged from 4140 steel, Laser etched size on top of shim for quick easy identification
• Products designed by people who live for powersports
• Dyno performance evaluations by C&E testing facility in Urbandale, Iowa
• Solidly built to deliver ruggedness for exceptional performance on the trail
• Extensive selection of parts to fit many makes and models

A Cylinder Works replacement cylinder is a completely new, not remanufactured, cast aluminium nickel silicon carbide (NSC) electroplated stock bore cylinder that appears just like an OE cylinder.

NSC is a composite of nickel and silicon carbide, providing an excellent wear-resistant surface with oil retention capabilities.

Cylinders are then diamond honed to the exact bore dimension and proper surface finish to ensure the proper ring seal and oil retention.

Features:

• Cylinder looks just like stock.
• Nickel silicon carbide plated for longer life.
• No machine work needed *
• Replacement cylinder for standard bore only.

* Honda CRF250R and CRF250X may require slight case modification. Kit comes with instructions.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

The easiest way to maneuver your motorcycle with a kickstand in garages and tight places. Just lift and go!

The U-Turn Motor Mover motorcycle dolly is adjustable without tools and is therefore easy to adjust to the size of your motorcycle. No need to ride your motorcycle onto the dolly itself, simply place the U-Turn Motor Mover in the right position and lift up your motorcycle. Because of the lightweight and durable materials, the U-Turn Motor Mover motorcycle dolly is easily foldable for storage. The high-quality 75 mm swivel wheels make the U-Turn Motor Mover motorcycle dolly easy to move and therefore perfect to use in narrow spaces (e.g. a small garage).

Features:

• Easily lift and move your motorcycle.
• Lightweight and durable materials.
• Perfect for use in narrow spaces.
• High-quality 75 mm swivel wheels.
• Foldable for easy storage.
• Adjustable without tools.
• Suitable for motorcycles with a wheelbase from 130 to 152,5 cm up to 275 kg.
• Suitable for motorcycles with a max. length 210 cm.

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

K&N XStream Series Motocross Air Filters take performance to the next level with the addition of a filter within the filter's top in order to add even more filtration area for high air-flow and capacity. Each filter piece has pleated media, which creates a large surface area that provides high airflow and great dirt holding capacity for extreme conditions. The two-piece design eases installation and removal on modern narrow-framed MX bikes. The epoxy-coated aluminium wire mesh, incorporated into a backfire screen, protects the filter element from harmful debris. A custom base seal ensures a precise and secure fit. K&N air filters are washable and reusable and they come pre-oiled and ready to use!

Features:

• Large surface area for long service life.
• Low restriction.
• Washable and reusable.
• Outstanding filtration.

Specifications:

• Filter Material: Cotton Gauze
• Height: 2.875in (73mm)
• Inside Diameter: 6.875in (175mm)
• Outside Diameter: 8.125in (206mm)
• Washable: Yes
• Filter Re-Oiling Amount: 0.8oz (24ml)

Universal modular exhaust protector from Oxford.

Features:

• Fully adjustable.
• 300-620mm circumference.

Includes:

• Si licone bands
• 8 x stainless steel plates
• Jubilee clip
• Hex key

• Direct OEM replacement fuel line clamp kit
• This ultimate fuel line clamp kit is an absolute necessity for any shop, technician, or DIY mechanic
• Kit contains 4 of each Fuel Star fuel line OEM replica clamps, available in sizes from 7-17mm I.D.
• Each clamp is an exact replica of the major OEM's fuel line clamps and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• 4-packs also available to refill the kit

This K&N racing air filter has just two layers of cotton to provide even lower air restriction than our replacement air filter for street vehicles. Unlike K&N replacement air filters, fuel management modifications will be necessary with this racing filter. K&N racing air filters are washable and reusable.

Features:

• Designed to increase horsepower and acceleration.
• Designed for racing and track applications.
• Washable and reusable air filter.
• Low restriction.

Specifications:

Heigh 1.313in (33mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Outside Length: 9.688in (246mm)
• Outside Width: 7.156in (182mm)
• Filter Re-Oiling Amount: 0.31oz (9ml)

Features a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bird-caged wire ends, EPDM moulded rubber for high UV resistance and injection moulded components manufactured from high-strength POM material.

Features:

• Flexible and durable with steel inner casing that is tightly coiled for low compression.
• Pre-lubricated nylon inner sleeve.
• Bird caged wire ends.
• EPDM moulded rubber for high UV resistance and injection moulded components made from high-strength POM material.

Note: Kit contents may vary by fitment and are subject to change.

K&N Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. K&N Powersports Oil Filters trap harmful contaminants while the filter's construction allows for high oil flow rates. K&N Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.

Features:

• High-performance design for outstanding filtration.
• High-efficiency media with uniform pleats.
• Oil filter design provides for a high rate of oil flow.
• Ideal for high-end synthetic motor oil.

Specifications:

• Style: C Material: High Flow Premium Media
• Gasket Material: Nitrile Rubber
• Outside Diameter: 41mm
• Inside Diameter: 11mm
• Height: 69mm

Brand new aftermarket Stator + Voltage Regulator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• All shipped products are tested

Stator

• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Connector included
• Rubber grommet included

What are the advantages of the MOSFET Technology?

• Runs much cooler than the traditional Shunt voltage regulator rectifier
• Less load on the stator, less work, less fuel is used and you save
• The power charging your battery is steadier and smooth
• Extends the battery’s life and cold-cranking capacity
• Removes stator load resulting in more engine power
• Optimize power delivery by switching the stator coils on or off

Stator Dimensions:

• Interior diameter: 42 mm
• Exterior diameter: 115 mm
• Thickness: 24 mm
• Length of wires stator to grommet: 150 mm
• Length of wires grommet to plug: 1470 mm

Other specifications:

• Number of wires: 3
• Number of plugs: 1
• Number of pins: 3
• Number of poles: 18
• Alternator: Yellow to Yellow = 0.4 ohms +/-20%

Regulator Dimensions:

• Width: 120 mm
• Length: 111 mm
• Height: 35 mm
• Fixation holes centre to centre: 94 mm

Other specifications:

• Number of plugs: 2
• Number of pins: 5

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

Anyone who rides or repairs Aprilia’s motorcycles is probably familiar with the stator, flywheel, and sometimes voltage regulator issues common to these models. Most of these bikes will have had at least one stator fail in its lifetime. The main problem was extremely strong magnets were used on the original flywheels, creating a very high power stator output, which generated excessive heat. This usually resulted in burned up, or shorted stator winding, and often in a failed voltage regulator.

To prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a complete reliable heavy-duty charging system replacement kit for your Aprilia. Upgrade today if you haven’t already!

• Heavy-duty Kokusan brand recall-type OEM flywheel
• Triple-tested heavy-duty stator
• Voltage regulator rectifier
• Crankcase cover gasket
• Flywheel puller

With this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies

• Kokusan upgrade/recall type flywheel Lower-strength magnets for correct stator output, low heat generation, and long-term reliability.
• Built to OEM size Fits precisely in your ride: install it and forget it.
• Improved epoxy Uses high-temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment
• High-grade steel capping Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.
• Precise balancing Eliminates crankshaft vibrations for longer engine longevity.

Don't waste time with temporary solutions, and start fixing your ride like a pro!

Please note: There are two possible kits for RSV4 engine. This kit ONLY fits RSV4 engine numbers HIGHER than 3413 with Kokusan flywheels. Please compare our flywheel to your original.

If your RSV4 engine number is LOWER than 3413, your motor uses the Mitsubishi flywheel, and will need Stator Assembly 857201. See kit RMS900-104929

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

• Precision machined from high-grade 304 Stainless Steel.
• Stainless steel reduces thermal conductivity by up to 93% compared to aluminium.
• Plastic composite pistons are prone to damage and become brittle with age.
• OEM chrome-plated steel and aluminium pistons are prone to corrosion.
• Eliminates failure prone ceramic inserts found on some KTM models.
• Each kit contains piston or pistons to rebuild one caliper.