Products

DBD015

DBD022

This DENALI Premium Wiring Harness features high-quality waterproof components and is designed to power two DENALI LED Light Pods. It features low- profile, water-tight connectors and premium moulded wire to ensure moisture is kept out of the system. The harness includes a completely sealed, waterproof switch that was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It’s clever design can be either flush or bar mounted.

What’s In The Box?

• (x1) Premium Wiring Harness
• (x1) Single-Intensity Relay
• (x1) DrySeal™ ON-OFF Waterproof Illuminated Switch
• (x1) 7/8 inch Handlebar Switch Mount
• (x1) 1 inch Handlebar Switch Mount
• (x2) Self Tapping Screw
• (x1) Adhesive Pad
• (x4) Zip Ties

Harness the flexibility and intelligence of your BMW motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW's existing handlebar switches or the CANsmart™ Accessory Manager Software.

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light.

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal.

Features:

• High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches.
• Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists.
• Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
• Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during roadside emergencies.
• Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
• Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real-time to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
• Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
• Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop down menu and make your selection from the list of available circuit functions.
• Switched Power Source - The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
• Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
• On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

What’s In The Box?

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Horn Extension Cable
• B6 Brake Light Wiring Adapter
• Zip-ties
• Adhesive Hook-and-Loop Fastener
• Micro USB Programming Cable

Harness the flexibility and intelligence of your BMW motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW's existing handlebar switches or the CANsmart™ Accessory Manager Software.

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light.

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal.

Features:

• High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches.
• Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists.
• Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
• Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during roadside emergencies.
• Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
• Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real-time to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
• Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
• Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop down menu and make your selection from the list of available circuit functions.
• Switched Power Source - The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
• Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
• On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

What’s In The Box?

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Horn Extension Cable
• B6 Brake Light Wiring Adapter
• Zip-ties
• Adhesive Hook-and-Loop Fastener
• Micro USB Programming Cable

The ground-breaking Harley-Davidson CANbus controller provides plug & play connection and intelligent control of aftermarket and genuine Harley-Davidson accessories right from your bikes original switches or DENALI Accessory Manager Software. Simply connect the CANsmart™ Controller to your Harley-Davidson diagnostic port to access over 35 programmable accessory settings that provide intelligent control of auxiliary lights, horns, brake lights, or any other accessory you can imagine. The four accessory circuits are electronically fused and can provide up to 25 peak amps (10 amps continuous).

Features

• High/Low Sync - Set passing lamps and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your bikes factory trip switch. Click three times to turn lights on/off, or hold for 3 seconds to enter dimming mode where you can cycle between 10% - 100% intensity.
• Modulate Lights - Set passing lamps or auxiliary lights to modulate to increase your visibility to other motorists.
• Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
• Flash With Turn Signal - This features flashes the corresponding auxiliary light when you turn your turn signal on, enabling auxiliary lights to function as turn signals.
• Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
• Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your passing lamps or auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
• Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
• Switched Power Source - The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
• Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
• On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

What’s In The Box?

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Horn Extension Cable
• B6 Brake Light Wiring Adapter
• Zip-ties
• Adhesive Hook-and-Loop Fastener
• Micro USB Programming Cable

DENALI D4 Auxiliary LED Light Kit for Motorcycles, ATVs, UTVs, Snowmobiles, Jeeps and Trucks

Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 8750 lumens in a pair of aggressively styled housings. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included pair of spot lenses throws a massive beam of light 800 feet.

Features

• Comprehensive 9 piece LED light kit specifically designed for powersports applications
• High-Intensity Series Cree LEDs outputting 8760 lumens per kit
• TriOptic™ Multi-Beam Lens System includes a Spot, Flood and Hybrid beam option in one kit
• Premium powersports harness with waterproof switch and handlebar switch mount included
• DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

Specs

• LED’s: (8x) 10 Watt Cree XPL HI
• Power Draw: 6.6 Amps
• Beam Distance (Spot): 800 Feet
• Beam Width (Spot): 110 Feet
• Raw Lumens: 8760
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 3.9” Square x 2.6” Deep (each)
• Pod Weight: 1.55 lbs (each)
• IP67 Waterproof & Submersible

Includes

• x2 DENALI D4 LED Light Pods
• x1 DENALI 2.0 Premium Wiring Harness Kit
• x1 7/8 inch Handlebar Switch Mount
• x1 1 inch Handlebar Switch Mount
• x2 Hinge Mounts with M8 Stainless Steel Hardware
• x4 Zip Ties & (x1) Adhesive Mounting Square

Denali's Essential Lighting Bundle is a vehicle-specific driving light kit that was purpose-built to provide DENALI-level quality and performance at the most economical price point possible. The kit features a pair of our DL4 Driving Lights, our standard powersports harness, and a vehicle-specific upper light mount to position the lights in the ideal location and make installation a breeze.

The included single-intensity harness provides a simple on/off function via our waterproof push-button switch, but can easily be upgraded to dual intensity functionality by adding our modular DataDim Controller. If adding the dual intensity module, your lights will switch between half and full intensity with your vehicle's high beam switch.

Bundle Contents:

• (2x) DL4 Driving Light with DataDim Technology
• (1x) Driving Light Mount - Honda Africa Twin 1100 Adventure Sports ES, '20-'23
• (1x) Wiring Harness Kit for Driving Lights - Standard Powersports

Note: Product bundles ship complete in a white box and will only show in stock if all components are available. All bundle components are also available for individual sale.

The DM was designed to concentrate all 2190 lumens into a small optic to create a super-compact light that is incredibly bright to look at. These lights are the ideal solution for daytime visibility but will still outshine your typical high beam. The installed spot beam lenses create a beam that reaches a distance of 395 feet (per pair). The included flood lenses carry an official E-Mark certification and throw a beam of light 150 feet wide.

Features:

• High-Intensity Series Cree LEDs outputting 2190 lumens per pair
• TriOptic™ Multi-Beam Lens System includes a Spot, Flood, and Hybrid beam option in one pair of pods
• DataDim™ equipped light pods to enable plug and play connection, and integrated dimming, with DENALI dimming and lighting controllers.
• DrySeal™ Submersible Waterproof light housings can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Additional pair of E-Mark Approved flood lenses included

Pair Specs:

• LED’s: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 395 Feet
• Beam Width (Spot): 55 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 1.7” Round x 2.4” Deep (each)
• Pod Weight: 0.5 lbs (each)
• IP67 Waterproof & Submersible
• E Mark Approved Flood Lenses

Includes:

• x2 DEDNLDM050 - DENALI DM LED LIGHT POD - DATADIM™ TECHNOLOGY - SINGLE
• x1 DEDNLWHS10900 - DENALI 2.0 PREMIUM WIRING HARNESS KIT (REV08)

The unique oversized reflector in the DR1 creates an industry-leading 1000 foot beam distance from the single pair of 10 watt LEDs. No other 10 watts LED even comes close. The DR1 is ideal for night riding conditions where maximum beam distance is desired. The included pair of True-Hybrid™ lenses carry an official E-Mark certification and create a more balanced combination of distance and width.

Features:

• High-Intensity Series Cree LEDs outputting 2190 lumens per pair
• TriOptic™ Multi-Beam Lens System includes a Spot, Flood, and Hybrid beam option in one pair of pods
• DataDim™ equipped light pods to enable plug and play connection, and integrated dimming, with DENALI dimming and lighting controllers.
• DrySeal™ Submersible Waterproof light housings can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Additional pair of E-Mark Approved spot lenses included

Pair Specs:

• LED’s: (2x)10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 1000 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 3.7” Round x 3.8” Deep (each)
• Pod Weight: 1.45 lbs (each)
• IP67 Waterproof & Submersible
• E Mark Approved Hybrid Lenses

Includes:

• x2 DEDNLDR1050 - DENALI DR1 LED LIGHT POD - DATADIM™ TECHNOLOGY - SINGLE
• x1 DEDNLWHS10900 - DENALI 2.0 PREMIUM WIRING HARNESS KIT (REV08)

DENALI Universal Crashbar / Engine Guard Mount

This DENALI Bar Camp Light Mount Kit allows fitment of any DENALI LED Lights to engine guards, crash bars, or any tube 21mm-29mm (0.826in-1.125in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

These clamps are intended for mounting lights to OEM or aftermarket crash bars, handlebars and frame tubes commonly found on adventure bikes, dual sport bikes, ATVs and snowmobiles. The clamps allow the lights to be positioned to the inside of the bars, ensuring they will be protected in a tip over.

Features

• Adjustable grip range (21mm-29mm) (0.826in-1.125in)
• Rotatable mounting shelf allows 4th axis of adjustability
• Lights can be mounted to shelf or directly to clamp
• Accepts M8 bolt from light pod
• Billet aluminum with black anodized finish
• Fits all standard SW-MOTECH, R&G, Givi, Kappa, Hepco-Becker, Krauser, Touratech, and BMW original crashbars
• Sold as pair

What's In The Box?

• (x2) Mounting clamps
• (x2) Rotatable mounting shelves
• (x1) Hardware Kit

Destroy the dark and seize the day with unmatched style and insane performance. The Destroyer Headlight Kit for Harley-Davidson Road Glide features multiple industry-first innovations, making it the brightest and most feature-rich motorcycle LED headlight ever released. This complete headlight upgrade kit includes the Destroyer headlights, powder-coated steel mounting brackets, hardware, and a plug-and-play wiring harness for quick and easy at-home installation.

Revolutionising Road Glide Headlights: The Destroyer Kit

Harley-Davidson Road Glide riders, get ready to dominate the night. The Destroyer Headlight Kit is more than an upgrade — it’s a complete transformation of your motorcycle’s lighting system. This package delivers unparalleled performance and style, setting a new standard for motorcycle LED lighting.

Unmatched Brightness and Beam Control

The Destroyer Kit produces an incredible 24,800 raw lumens, making it the brightest Road Glide headlight on the market. Two high beam options allow you to switch between DOT-compliant mode and exclusive Destroyer mode for maximum illumination. Destroyer high beam delivers a massive 1,950-foot beam for unrivalled night visibility.

Innovative Features

This ultra-rugged 24,800-lumen DOT headlight combines unmatched beam performance with a stylish linear low beam, dual high beam intensity options, and a modular lens system that lets you change low beam colour on the fly. The result is a headlight system that completely redefines what’s possible.

Dual High Beam Intensities

The Destroyer features two selectable high beam intensities: a DOT-legal high beam or the Destroyer high beam, which doubles output and delivers a driving beam over 200 feet wide and 1,500 feet long.

Global Versatility

Choose between DOT-approved or a 1,950-foot Destroyer beam. Two pre-pinned and labelled high beam wires allow easy selection between USA DOT and European ECE performance. Insert your chosen wire into the waterproof DT connector and secure the unused wire with the pre-applied heat shrink.

Built for the Long Haul

Featuring IP69K-rated DrySeal technology, these LED headlights are built to endure the harshest conditions. The ultra-slim profile avoids interference with accessories, while the easy-adjust design allows quick beam alignment without disassembly.

Safety First

Rider safety is paramount. The Destroyer Kit ensures maximum visibility to other road users, with both DOT and ECE compliance options so you can ride confidently and legally in any environment.

D14 Dual LED Headlight Features

• Dual high beam design – Choose DOT or Destroyer high beam
• DOT/SAE street-legal high/low – Legal in all 50 states
• ECE street-legal high/low – For EU and global markets
• 25,800 raw lumens – All-on high/low output
• Modular X-Lens system – Change low beam colour to amber or yellow
• Ultra-slim profile – Avoids interference with aftermarket amplifiers
• EMC protection – CISPR25 compliant, no electronic interference
• Easy-adjust design – Adjust beam without removing components
• DrySeal waterproof construction – IP69K rated, fully sealed
• Complete plug-and-play kit – Everything needed for installation
• Limited lifetime warranty

D14 Dual LED Headlight Specifications

• LEDs: (28×) 8-watt high-intensity LEDs
• Max power draw: 210W / 16A (Destroyer high + low)
• Raw lumens: 24,800
• Operating voltage: 9–32 VDC
• Pod size: 6.75" round × 3" deep
• Pod weight: 2 lb
• EMC: R10 and CISPR 25 compliant
• Waterproof rating: IP68 and IP69K
• DOT/SAE compliant low beam
• DOT/SAE compliant high beam (blue wire)
• ECE R149 approved high beam (orange wire)

Dual Beam Performance

• Destroyer Mode (ECE high + low)
  • Raw lumens: 25,800
  • Power draw: 210W
  • Beam distance: 1,950 ft
  • Beam width: 300 ft
• DOT High Beam Mode (DOT high + low)
  • Raw lumens: 15,350
  • Power draw: 110W
  • Beam distance: 1,105 ft
  • Beam width: 300 ft
• Low Beam Only (DOT and ECE)
  • Raw lumens: 6,724
  • Power draw: 64W
  • Beam distance: 689 ft
  • Beam width: 300 ft

What’s in the Box

• (2×) D14 Destroyer Headlights
• (1×) Road Glide mounting brackets and hardware
• (1×) Plug-and-play wiring harness

This convenient Denali lighting kit combines several high-quality Denali components including a wiring harness, light mount, and lights. It's designed to give you everything you need to equip your machine with an improved lighting setup and illuminate your riding experience.

Kit contains:

1x DENALI 2.0 PREMIUM WIRING HARNESS KIT (REV08) (SKU: DEDNLWHS10900)

1x DENALI ENG GUARD/CRASHBAR LIGHT MNT/ 21-29MM DIAM TUBES BLK (SKU: DELAH0010300B)

2x DENALI D4 LED LIGHT POD - DATADIM™ TECHNOLOGY - SINGLE (SKU: DEDNLD4050)

DENALI 2.0 PREMIUM WIRING HARNESS KIT (REV08) details:

This DENALI Premium Wiring Harness features high-quality waterproof components and is designed to power two DENALI LED Light Pods. It features low-profile, water-tight connectors and premium moulded wire to ensure moisture is kept out of the system. The harness includes a completely sealed, waterproof switch that was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It’s clever design can be either flush or bar mounted.

What’s In The Box?

• (x1) Premium Wiring Harness
• (x1) Single-Intensity Relay
• (x1) DrySeal™ ON-OFF Waterproof Illuminated Switch
• (x1) 7/8 inch Handlebar Switch Mount
• (x1) 1 inch Handlebar Switch Mount
• (x2) Self Tapping Screw
• (x1) Adhesive Pad
• (x4) Zip Ties

DENALI ENG GUARD/CRASHBAR LIGHT MNT/ 21-29MM DIAM TUBES BLK details:

DENALI Universal Crashbar / Engine Guard Mount

This DENALI Bar Camp Light Mount Kit allows fitment of any DENALI LED Lights to engine guards, crash bars, or any tube 21mm-29mm (0.826in-1.125in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

These clamps are intended for mounting lights to OEM or aftermarket crash bars, handlebars and frame tubes commonly found on adventure bikes, dual sport bikes, ATVs and snowmobiles. The clamps allow the lights to be positioned to the inside of the bars, ensuring they will be protected in a tip over.

Features

• Adjustable grip range (21mm-29mm) (0.826in-1.125in)
• Rotatable mounting shelf allows 4th axis of adjustability
• Lights can be mounted to shelf or directly to clamp
• Accepts M8 bolt from light pod
• Billet aluminum with black anodized finish
• Fits all standard SW-MOTECH, R&G, Givi, Kappa, Hepco-Becker, Krauser, Touratech, and BMW original crashbars
• Sold as pair

What's In The Box?

• (x2) Mounting clamps
• (x2) Rotatable mounting shelves
• (x1) Hardware Kit

DE NALI D4 LED LIGHT POD - DATADIM™ TECHNOLOGY - SINGLE details:

Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included spot lens throws a massive beam of light and carries an official E-Mark certification.

D4 Pod Features

• High-Intensity Series Cree LEDs outputting 4380 lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Additional E-Mark Approved flood lens included
• Amber lenses available (sold separately) DNL.D4.10100

D4 Pod Specs

D4 Pod - What’s In The Box?

The DENALI DOT approved M5 LED Headlight module is a direct plug and play replacement to your original 5.75 inch sealed beam headlight. It features a super wide low beam, piercing high beam, and halo day time running light. Drop this headlight module inside your motorcycle's existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock LED headlight. The unique design and black chrome finish of the optics will give your bike that modern custom look while also increasing your visibility to oncoming traffic even during daylight.

Features

• Directly replaces OEM 5.75" Headlight
• Plug & play with H4 connectors
• Premium LEDs boast an average life span of 50,000 hours
• DOT High & Low Beam
• Robust aluminum housing
• Halo daytime running light
• Black chrome finish
• Enhances visibility and safety
• IP-68 Waterproof 

Product Specs

• Pod Size 5.75” Round x 2.1” Deep
• LED: (2x) Cree XML, (1x) Philips Altilon C-4, (2x) Cree XPG2, (30x) Philips Luxeon 3014
• Beam Distance: High 500ft, Low 525ft
• Intensity: DOT High/Low
• Input Voltage: 9v-32v DC
• Power Draw: High 19 Watts / Low 19 Watts / Halo 6 Watts
• Beam Angle: DOT High/Low
• Waterproof: IP-68

What's In The Box?

• (1x) LED Headlight Module 
• (1x) Posi-tap
• (1x) Posi-lock
• (1x) 3ft length of 18 gauge wire

LOUD! Stylish! Rugged!

Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn and twice as loud as a standard car horn! The DENALI™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

The unique two-piece design of the DENALI split horn separates the compressor from the acoustic unit allowing the horn to be installed in tight spaces like behind motorcycle body panels. A 48-inch heat-resistant air hose connects between the two halves allowing you to mount them in an entirely different location on your bike without sacrificing any sound output.

Specs:

• 120 Decibels at 3 feet
• Operating Voltage: 12V
• Power Draw: 20 amps
• Size (Compressor): 4.5" x 2.9" x 3.0"
• Size (Acoustic Unit): 4.1" x 3.7" x 3.4"
• Housing: Two-Part Design
• CANbus Compatible
  
  

What's in the box:

• Horn compressor and horn acoustic unit
• 12-volt, 30-amp relay
• Heat-resistant air hose
• Compressor Mounting Hardware
• Acoustic unit mounting hardware
• Zip tie mounting option

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100-decibel disc horn. Designed to be a direct Plug and Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections and can handle the 5 amp load. When stock isn't quite enough, be heard with the SoundBomb Mini.

Some motorcycle horn circuits are not capable of powering this 5 amp horn. If your horn circuits' max amperage is less than 5 amps, or if you are unsure, simply add the plug-n-play harness to bypass the horn circuit and draw power directly from your battery. Also, add a standard relay as this is not included with the horn harnesses.

Product Specs:

• 113 Decibels at 3 feet.
• Operating voltage:12 Volts (11.7 volts required).
• Power draw: 5 Amps
• Single piece design
• Dimensions: Approximately 3.25" x 3.4" x 2.5"
• Stylish all-black design.
• Fits in most factory horn locations.

Kit Contents:

• Single-piece electromagnetic horn.
• Mounting hardware.
• Fully illustrated Installation instructions.

This rear-visibility bundle is the ultimate solution for making you more visible to other motorists in daytime or nighttime conditions. The bundle includes a pair of rear switchback T3 turn signals, a universal license plate mount, and a plug-and-play wiring harness for effortless connection to your bike via our CANsmart controller.

The T3 switchback signal pods have a red running light, super bright red brake light, but switch to a bright amber LED signal light in sync with your factory turn signals. All T3 functions are ECE compliant and are guaranteed to help you stand out!

This bundle is designed to connect to a CANsmart controller, which is sold separately.

Bundle Contents:

• (1x) T3 Modular Switchback Signal Pods - Rear
• (1x) License Plate Mount - For T3 Signal Pods
• (1x) CANsmart Wiring Harness for T3 Switchback Signals

Note: Product bundles ship complete in a white box and will only show in stock if all components are available. All bundle components are also available for individual sale.

This vehicle-specific driving light mount allows you to mount any DENALI driving light to your R1300GS Adventure. Its low profile and tucked-in design make for a very clean install while placing your lights in the optimum location.

This kit includes beefy powder-coated steel brackets with an M8 mounting hole and all necessary mounting hardware.

What's In The Box

• (x2) Light Mounts
• Mounting Hardware

DENALI Headlight Adapters

Our headlight adapters enable plug n play installation of LED headlight modules in vehicles that don't use a standard H4 connector. Available for models with original H9 / H11 or Harley-Davidson LED connectors.

420MBK RJ CLIP

428V ZJ RIVET

428VM ZJ RIVET

520ERV2 ZJ RIVET GOLD

520NZ FJ CLIP

525HV ZJ RIVET

525 RJ CLIP

630VS XJ RIVET