Products

Comes with all seals necessary to rebuild the engine and transmission.

Features:

• Made from the highest quality materials available.
• Kits include the necessary engine oil seals required to rebuild the engine and transmission, including crankshaft, output shaft, water pump, clutch shaft, and starter seals.
• Oil seal kits do not include valve stem seals or mechanical water pump seals.

Brand new aftermarket Oil Temperature Sensor.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

Dimensions:

• Length: 49 mm
• Thread Diameter: 12.8 mm
• Thread Length: 9 mm
• Nut Diameter: 9 mm

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Gasket kit made from the highest quality gasket materials.

Features:

• Precision cut to factory specifications.
• OEM gasket material is designed to seal perfect surfaces.
• Hand-selected gasket material that outperforms OEM material on imperfect surfaces.
• High-performance Interface MicroPore gasket material is utilized where applicable.

For repairing a leaking counter shaft seal. Meets or exceeds OEM specs for fit and performance.

Includes:

• Output Shaft Seal
• O-Ring Seal
• D-Ring Seal, Collar
• Snap Ring

Replaces leaky seals and bushings behind countershaft sprockets. Competitively priced against OEM parts. Quick solution to repairing a leaking counter shaft seal in one complete kit.

Includes:

• Hot Rods countershaft seal
• Countershaft bushing
• O-rings
• Sprocket nut washer (where applicable)

Note:

Does not include water pump bearings or transmission bearings.

Replaces leaky seals and bushings behind countershaft sprockets. Competitively priced against OEM parts. Quick solution to repairing a leaking counter shaft seal in one complete kit.

Includes:

• Hot Rods countershaft seal
• Countershaft bushing
• O-rings
• Sprocket nut washer (where applicable)

Note:

Does not include water pump bearings or transmission bearings.

Replaces leaky seals and bushings behind countershaft sprockets. Competitively priced against OEM parts. Quick solution to repairing a leaking counter shaft seal in one complete kit.

Includes:

• Hot Rods countershaft seal
• Countershaft bushing
• O-rings
• Sprocket nut washer (where applicable)

Note:

Does not include water pump bearings or transmission bearings.

Replaces leaky seals and bushings behind countershaft sprockets. Competitively priced against OEM parts. Quick solution to repairing a leaking counter shaft seal in one complete kit.

Includes:

• Hot Rods countershaft seal
• Countershaft bushing
• O-rings
• Sprocket nut washer (where applicable)

Note:

Does not include water pump bearings or transmission bearings.

Replaces leaky seals and bushings behind countershaft sprockets. Competitively priced against OEM parts. Quick solution to repairing a leaking counter shaft seal in one complete kit.

Includes:

• Hot Rods countershaft seal
• Countershaft bushing
• O-rings
• Sprocket nut washer (where applicable)

Note:

Does not include water pump bearings or transmission bearings.

Replaces leaky seals and bushings behind countershaft sprockets. Competitively priced against OEM parts. Quick solution to repairing a leaking counter shaft seal in one complete kit.

Includes:

• Hot Rods countershaft seal
• Countershaft bushing
• O-rings
• Sprocket nut washer (where applicable)

Note:

Does not include water pump bearings or transmission bearings.

Replaces leaky seals and bushings behind countershaft sprockets. Competitively priced against OEM parts. Quick solution to repairing a leaking counter shaft seal in one complete kit.

Includes:

• Hot Rods countershaft seal
• Countershaft bushing
• O-rings
• Sprocket nut washer (where applicable)

Note:

Does not include water pump bearings or transmission bearings.

The Oxford 12V Horns are a loud 105db horn suitable for virtually any 12V motorcycle or scooter courtesy of its universal mounting bracket. Available in black and chrome these horns will look the part on almost any ride.

Features:

• Loud 105db horn
• Suitable for 12v motorcycles and scooters
• Universal mounting bracket to fit most motorcycles and scooters
• Epoxy powder coated for long term corrosion resistance

Oxford 12v cigarette lighter accessory plug.

Key Features
• Plug in an SAE-powered accessory or charger without connecting directly to the battery.
• No need to remove the motorcycle seat to access the battery.
• Cable length: 0.5m (OXEL106) or 3.0m (OXOF704).
• Connector: USA/SAE (OXEL106) or Standard (OXOF704).
• Suitable for up to 5amps.

If your indicators flash too fast, fit these resistors into the indicator wiring.

Features:

• Stabilises LED indicator flash rate.
• Simple to fit bullet connectors.
• Works with low-power bulb indicators.
• 18 watt/10-ohm Ceramic Resistors (18W@14V)
• 9 watt version available (EL321)

The Oxford Monster chain has a 14mm hex chain made from Ni-Cro-Mo steel reinforced with Titanium alloy. It comes covered in a protective sleeve to help protect your paintwork.

This chain has undergone rigorous independent testing and has Sold Secure Motorcycle GOLD approval. They can be used with all Oxford ground anchors and U locks. Insurance approved if used with an approved padlock of the same standard.

Features

• 14mm Hex chain.
• Ni-Cro-Mo steel.
• Protective sleeve.
• Can be easily stowed under the seat.
• Combine with Oxford Monster and Boss locks for additional security.

The Oxford Patriot chain has a 12mm square link chain made from Ni-Cro-Mo steel reinforced with Titanium alloy. It comes covered in a protective sleeve to help protect your paintwork.

This chain has undergone rigorous independent testing and has Sold Secure Motorcycle GOLD and is a SBSC certified product. It can be used with all Oxford ground anchors and U locks. Insurance is approved if used with an approved padlock of the same standard.

Features:

• 12mm square link high-security chain.
• Ni-Cro-Mo steel.
• Long links reduce weight and increase portability.
• Protective sleeve.

The Oxford 3 metre extension lead is suitable for up to 5amps.

This sturdy combination padlock will have multiple uses as a stand-alone product - securing gates, tool cabinets, and shed doors - as well as combining perfectly with cable and chains for extended security.

If you don't want yet another key to carry around or are concerned about losing your key, this could be the perfect solution!

Features:

• Hardened steel shackle
• 5-digit resettable combination
• Weight 178g
• Dimensions: 65mm x 35mm x 7 mm

Prevent your tyre valve from accumulating dirt, dust and grime in style with Oxfords extensive range of novelty valve caps. Including the classic knurled and piston designs as well as the more unique skulls, dice and 8-balls, there's a perfect valve cap to complement your style. All Oxford valve caps provide a great seal that prevents dust, dirt, moisture and other grime from entering and also provides a last defence against problematic valve leaks.

Features:

• Prevents dust, dirt, moisture and grime build-up.
• Last defence against valve leaks.
• Lightweight construction.
• Sold in pairs.
• Design: 8 Ball
• Colour: Black

Ceramic Resistors
9 Watt
21.5 Ohm
Sold as Pairs

Oxford's Exhaust Heat Shield offers thermal protection by deflecting radiated exhaust heat and guards against you, your clothing or your accessories from accidentally touching a hot exhaust system.

The Heat Shield is supplied with adjustable clamps so it can be fitted to a variety of different-sized exhaust pipe diameters.

Features:

• Stainless steel construction.
• Thermal protection.
• Corrosion resistant.
• Easy to install.
• Includes:
  • Exhaust shield
  • 2 x 45 - 60mm clamps
  • Fixings: 2 x anti-vibration washers
  • M6 screws
  • Flat washers

The grips have ergonomically engineered surface structures to optimise riding performance.

Thicker rubber in areas of maximum wear rhombus tread pattern for vibration absorption 5 block siped tread patterns for high levels of grip and feel diamond tread pattern where maximum grip is required.

Features:

• Two bar end caps included.
• Fits 22mm handlebars.
• Dimensions:
  • Diameter 29mm
  • Length: 119mm

An easy-to-install motorcycle air pocket seat cushion that provides the rider with additional comfort during long rides.

This Air Seat is designed to fit touring and big adventure bike seats to offer extra comfort on those long road trips. 13 individual air pockets within the cushion reduce painful pressure points, promote blood circulation and lower shock and vibration.

Key Features:

• Air pocket seat cushion to improve your riding comfort.
• Eliminates numbness and painful pressure points.
• Air mesh fabric controls moisture and heat.
• Pump included with Schrader valve fitment.
• Non-slip backing to secure cushion position.
• Fully adjustable straps give a universal fitment.
• Quick release G-hooks allow seat cushion to be removed.
• Zip-off machine washable cover.

Specifications:

• Size : 38cm (L) x 36cm (W) x 4cm (H)
• Air cushion: 100% TPU.
• Cover: 100% polyester.

An easy-to-install motorcycle air pocket seat cushion that provides the rider with additional comfort during long rides.

This Air Seat is designed to match the seat profile of most pillion and enduro-style motorcycle seats. Twelve individual air pockets within the cushion reduce painful pressure points, promote blood circulation and lower shock and vibration.

Key Features:

• Air pocket seat cushion to improve your riding comfort.
• Eliminates numbness and painful pressure points.
• Air mesh fabric controls moisture and heat.
• Pump included with Schrader valve fitment.
• Non-slip backing to secure cushion position.
• Fully adjustable straps give a universal fitment.
• Quick release G-hooks allow seat cushion to be removed.
• Zip-off machine washable cover.

Specifications:

• Size : 28.5cm (L) x 21.5cm (W) x 4cm (H)
• Air cushion: 100% TPU.
• Cover: 100% polyester.

An easy-to-install motorcycle air pocket seat cushion that provides the rider with additional comfort during long rides.

The Air Seat is designed to fit the seat profile of most Street and Sport motorcycles. Nine individual air pockets within the cushion reduce painful pressure points, promote blood circulation and lower shock and vibration.

Key Features:

• Air pocket seat cushion to improve your riding comfort.
• Eliminates numbness and painful pressure points.
• Air mesh fabric controls moisture and heat.
• Pump included with Schrader valve fitment.
• Non-slip backing to secure cushion position.
• Fully adjustable straps give a universal fitment.
• Quick release G-hooks allow seat cushion to be removed.
• Zip-off machine washable cover.

Specifications:

• Size : 31cm (L) x 31cm (W) x 4cm (H)
• Air cushion: 100% TPU.
• Cover: 100% polyester.