Products

Use an inflation tool to inflate your tyres and expect to get between 16PSI and 18PSI in a 150/70 R18 tyre from 3 canisters. Enough to get you out of trouble.

Features:

• 16g CO² canisters.
• Sold in packs of 3.

This is an accessory cable, which when used with a HelmetLok (sold separately) will secure one or two helmets together or your jacket and helmet.

Pass one end of the cable through a convenient part of your bike, thread the other end through the loop then through the kit you want to secure. Use a HelmetLok to secure the end of the cable to your bike (see below)...done! When you’re done roll up the cable, slip it and you HelmetLok into the included neoprene storage bag and pop it your jacket pocket, top box or pannier.

The cable is vinyl coated, 5mm in diameter and 1.5 metres long with a loop at each end.

The GearLok Lock with Cable utilises a 150cm long braided galvanised steel plastic-coated cable to lock your helmet, jacket, backpack or any other accessory to your bike.

Simply pass the loop end of the cable through a convenient part of your bike like the frame, handlebar or grab rail. Thread the other end through the loop and then through the object/s you want to secure. Next, insert the end of the cable into the lock slot and slide the lock up or down the cable to adjust the length. Press the Snap Button till you hear a “Click” and scramble the four (4) digit security dial…done!

Your items are now secured to your bike, and you have two free hands!

When you return to your bike, set your personal four (4) digit combination code, press the Release Button, pull the cable free, rollup the cable and lock and slip it into the carry bag and into your jacket pocket.

Features:

• 150cm braided, plastic-coated steel cable.
• Secures helmet, jacket, backpack, and more.
• Loops through bike frame and item for easy locking.
• Adjustable sliding lock with Snap Button.
• 4-digit combination, no keys needed.
• Quick release with personal code.
• Compact, lightweight, fits in included carry bag.

Slide the cable through your jacket sleeve, hook the loops at the end of the cable onto the HelmetLok (sold separately) and attach it to your bike.

Alternatively, if your helmet does not have “D” rings, run the cable through your helmet’s chin piece, loop the ends through your HelmetLok and lock it to your bike. Now your Jacket AND Helmet are locked to your bike. The cable will recoil back to its original length and will easily fit in your pocket. The cable is made from 3mm thick nickel plated steel cable, is only 11cm long when coiled, stretching to 180 cm and has a load capacity of 100 kgs.

This phone holder and charger will charge both wirelessly and/or through a USB-C port. It will securely hold a phone up to 90mm wide and comes with all wiring necessary to connect to your motorcycle battery.

Features:

• Comes with 25mm handlebar ball mount with a 60mm clamp arm that can be securely locked in place.
• Bar clamp will open to 33mm, goes with 12, 22, 25 and 28mm clamp inserts.
• Has a built-in anti-vibration damper.
• IP65 rated.
• Simple one-handed on and off phone mounting, with a securing latch.

We all know how hard it is to get those “straight” chucks onto our motorcycle tyres. This chuck will fit most air hoses. If it doesn't screw directly onto the hose you are using, you will have to buy an adapter available at most plumbing supplies.

Having difficulty accessing your tyre valves? We’ve made it easy for you with our 90 degree clip-on valve extension. To make it even easier, we suggest attaching the chuck to your pump hose before attaching it to the tyre.

The MotoPressor Dial Tyre Gauge has an easy to read, 40mm dial with both PSI and Kpa graduations up to a maximum of 60PSI and 400Kpa.

This model has a straight stem and will hold the reading when removed from the valve stem, plus it has a bleeder/reset button.

The Motopressor Digital Tyre Gauge is designed to help you save money and maximize the life of your tyres. This device is equipped with four pressure scale selections – PSI, BAR, KPA and Kg/Cm2. Select the appropriate pressure scale, press the gauge onto the valve of your tyre, remove it and read the pressure.

Features:

• The pressure will display for 10 seconds before resetting to 0.
• Automatic shutoff feature ensures the batteries don't drain unnecessarily.
• Batteries are included and pre-installed.

CNC machined aluminium CO2 inflator. The Control Valve head slips directly onto your tyre valve and puts you in complete control over how much CO2 to discharge at a time.

This premium jump starter pack offers power anywhere, anytime, ensuring that you are never left stranded. An important piece of emergency kit, it can start motorcycles, watercraft, ATV/UTV and petrol car engines up to 5.0L.

Features:

• Charges your phone or tablet: essential functionality when you need it most.
• Compact and portable: complete kit weighs just 715g and fits into a 184 x 140 x 70mm carry case.
• Powerful performance: 10,000mAh battery capacity with a 500A starting current.
• Ideal for road trips: reliable jump starter pack for emergency use on the go.

The MotoPressor Pencil Tyre Gauge provides accurate, dependable tyre pressure readings with an easy-to-read dual scale. The dual scale provides a reading for both Kg/cm² and PSI. To use, simply press the head onto any standard valve system, and allow the gauge to provide a reading.

Includes 2 combination valve cap and tyre valve removal tools.

Compact tubeless puncture repair kit that includes everything you’ll need to get you back on the road.  The whole kit stores in a handy neoprene bag measuring 14 x 11 x 5cm and weighs 580gms.

Kit Includes:

• MotoPressor Puncture Repair Tool, a “4 in 1 multi-tool” that holds the four tools essential for tubeless tyre repair. The tool contains a pair of pliers, a rasp, an insertion tool and a sharp knife.
• A strip of 5 pre-vulcanized repair strings.
• 3 x 16g CO²
• An inflation tool.
• A sturdy zippered neoprene bag to store everything in.

The MotoPressor Puncture Repair Tool combines the four essential tools for tubeless tyre repair into one compact device.

This 4-in-1 multi-tool uses pre-vulcanized repair strings and packs neatly into a sheath measuring just 130 x 68 x 50mm—small enough to fit in your pocket. The tool includes pliers, a rasp, an insertion tool, and a sharp knife: everything you need to fix 99% of tubeless tyre punctures.

Because the repair strings are pre-vulcanized, there’s no need for glue. Each plug not only seals the hole but also forms a “patch-style” repair on the inside of your tyre.

The Rocky Creek RC-2000 is ideal for charging and maintaining all your 12V and 6V lead-acid batteries.

After it has fully charged a battery, the unit automatically switches to maintenance mode. This charger can charge and maintain batteries with a capacity from 2 to 60 Amp-hours. It emits a consistent 2A and includes safeguards such as reverse polarity protection, short circuit protection and overcharging prevention.

Press the mode button to change between 6V and 12V battery charging. The unit executes an 8-step charging cycle, an LED indicates when charging and when fully charged.

Features:

• Charges and maintains 6V and 12V lead-acid batteries.
• Suitable for battery capacities from 2 to 60Ah.
• Automatic switch to maintenance mode after full charge.
• Delivers a steady 2A output.
• -step charging cycle with LED status indicators.
• One-button switch between 6V and 12V modes.
• Built-in protections: reverse polarity, short circuit, and overcharging.

MotoPressor Tyre Gauge now comes standard with two chucks. A straight chuck for "easy to get at" valve stems PLUS a 45° chuck for those "not so easy to get at" valve stems.

We all know what a pain Petrol Station gauges are. Most are woefully inaccurate and impossible to get onto a motorcycle valve stem. To use the MotoPressor Tyre Gauge with Petrol Station gauge, simply attach the MotoPressor Tyre Gauge to your valve stem, attach the petrol station chuck to the inline fitting on the gauge and get an instant and accurate reading in PSI or KPA.

No need to switch between the gauge and air compressor hose! Added a little too much air to your tyre? Simply press the air bleed button and adjust to your desired pressure.

NOTE: When swapping out the chuck, use plumbers tape on the hose thread. Wrap the thread, in a clockwise direction with 3 - 5 wraps of plumbers tape. Screw on the new chuck and tighten. Failure to follow these instructions will result in air leaks.

22cm long phone lead with Lightning, USB C and Micro USB connectors. Will fit most late-model iPhone and Samsung phones.

Hardwire your charging solution to your bike battery. The two USB power ports offer 5V/2.1A per socket, and when powered on will display your battery voltage. The USB charging ports supply enough power to charge devices like phones, tablets, trackers, GPS, etc.

NOTE: The wire will come on when the ignition is turned on. We recommend installation by an auto electrician.

This power adapter features dual 45W USB-C ports and an 18W QC3.0 USB port, as well as a voltmeter to display your battery's current state of charge.

An ON/OFF button enables you to switch the unit off when your not using your bike. The USB ports provide ample power to quickly charge all your devices, such as phones, tablets, and GPS units.

On some bikes, like the 2015 BMW R1200GS LC, the battery isn’t easy to access. For the R1200GS, it’s hidden behind the left-hand side panel. On others, it's tucked behind fuel tank covers that must be removed just to reach the battery. That’s not ideal when you need to use a Mini Jump Starter, since you can't easily connect the jumper cables.

Here’s a practical solution: Access the battery once and install the included battery leads—red to positive (+), black to negative (−). The cables are 500mm long and connect to an EC5 plug. Secure the plug somewhere easily accessible on your bike.

If you ever need to jump-start, just plug the EC5 connector into your Mini Jump Starter; no tools or disassembly required.

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. Attach the power lead to your battery, Red to (+) and Black to (-). Next, attach the corresponding wires to the back of the socket as marked on the back of the socket. The socket will handle 12V/120W.

NOTE: Before drilling any holes, ensure there is enough space behind the installation point to accommodate the body of the socket.

If you have a 12V accessory with a standard cigarette lighter plug and you want to power it from a jump starter battery, this is the lead. Plug the EC5 plug into the corresponding EC5 port on your Jump Starter and plug your accessory plug into the lighter socket.

NOTE: Compatible with jump starter batteries using EC5 socket only.

Got an electronic device like a spot light with a male lighter attachment? Want to run it off your bike but don’t have a female lighter fitting? Not any more, just connect this fitting to any SAE battery lead and you're ready to go!

No soldering or splicing your wiring harness, simply plug it straight into any SAE battery lead. When you’re done, unplug this fitting and plug one of our charger cables in and charge your phone or tablet.

Mount your phone to your handlebars and keep it charged while you’re on the move.

Attach the mount to a round handlebar with a diameter of 22 to 32mm, connect the mount to your battery, red to positive (+), black to negative (-), and you have power. The mount has a 5V/2.5A USB charge port, an ON/OFF switch and comes with a free USB cable suitable for charging Apple and some Samsung phones.

Pair your phone to your bike's coms and you’ll have “turn by turn” navigation and be listening to your favourite tunes as you tear down the road!

Certified EN 60 529/IP66 (rating for Protection against dust and high-pressure water jets)

Note: Before you secure the holder, please check it isn't going to come into contact with anything like a tank bag when on full lock. This phone holder is not compatible with the otterbox cases.

Some bikes don't have round bars, and Rocky Creek's Phone Mount with USB Charging Port needs to mount to a round bar. Here is a solution. This extension mounts under the mirror stem on "most" bikes using handlebar-mounted mirrors. The diameter of the hole in the mount is 10mm. Unscrew your mirror, position the mount at the base of the mirror mount then screw your mirror back onto the mount.

Note: Before ordering, please check that the diameter of your thread at the end of your mirror is 10mm.

Got an accessory socket on your bike and want to connect a device with an SAE fitting like a MotoPressor Pocket Pump? This clever adaptor comes with a male lighter fitting that will fit BOTH car and motorcycle lighter sockets.

To plug into a motorcycle-style (Hella) socket, simply remove the RED adaptor at the front of the plug and plug straight into the motorcycle socket. To plug into a car socket, leave the RED adaptor in. Now you can use your MotoPressor Pocket Pump on both your bike and car.

This connector will enable you to run accessories like the MotoPressor Pocket Pump off a Mini Jump Starter. Plug the Blue plug (EC5) into your Mini Jump Starter and the other end into any accessory running an SAE connector like our MotoPressor Pocket Pump. You now have a means to connect and power any of your accessories from your Mini Jump Starter.

IMPORTANT - This lead is designed to run accessories like the Motopressor pocket pump. It is not designed to start your bike or car. Doing so is dangerous, will damage the lead and could cause damage to your bike or car. Use the crocodile clips supplied with your mini jump starter to start your bike or car.

This product has been designed to fit the Yamaha T7 Ténéré 2019-onwards.

This stainless steel kit provides 80mm of adjustment over the stock screen. In the raised position, the difference in ride comfort is remarkable. Wind noise reduction is very noticeable, and airflow underneath your screen reduces the vacuum effect, creating smoother airflow and reducing turbulence. In the lowered position, the screen sits at the same height as stock.

To adjust the screen, simply loosen the thumb nuts, slide into position, and re-tighten—no tools required.

Secure your essentials - helmet, luggage, and jacket - to your bike with the ZippyLok! This lockable "zip tie" is a fully adjustable ratcheting system with a resettable, 4-digit combination lock. Its maximum adjustable circumference is 260mm, and it weighs just 113g, making it an ideal travel companion, easily fitting into any pocket or tank bag. The strap is made from a steel core, wrapped in anti-scratch plastic to protect your bike. The weather-resistant body and locking mechanism are made from zinc alloy for absolute security.

Features:

• Water-resistant.
• Strong – hard to cut through.
• Anti-scratch.
• Multitude of applications.
• Ultra-lightweight.

Threaded at the top only. Takes less time to remove or tighten.

Made of aluminium with anodized finish.