HARD PARTS

HFP replacement fuel pumps, modules, assemblies, and kit components are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

Putoline Oil is a Dutch manufacturer and supplier of high-quality oils and lubricants developed specifically for motorcycles, scooters and quads, making Putoline unique. Almost 50 years of experience and continual research allows Putoline to provide cutting edge products. Manufacturing their own products guarantees consistently high-quality motorcycle oils. Putoline Oil, Driven by Technology!

Putoline air filters, based on leading-edge open-cell foam technology, bring users major benefits, including:

• Improved performance through increased airflow
• Improved protection through finer filtration levels
• Substantial cost savings through serviceability and re-use

Fully reticulated (open cell) foam, as used in all Putoline filter products, consists of a honeycomb of tiny, interlocking cells of uniform size.  When treated with specially formulated filter oil, each passageway is like hundreds of very small centrifugal/oil bath filters connected one to another.  In this way, the foam traps and holds the particles throughout the entire volume of foam.

The development of this unique foam represents a major advancement in air filtration technology. As a result, foam air filters, when compared with paper or cotton gauze equivalents, combine great airflow capability, huge dust holding capacity, and very high filtration efficiency for even extremely small particles.

Construction:

1. Coarse open-pore foam catches airborne dirt, grime and sand.
2. Fine open-pore inner foam acts as a second filter to trap the smallest particles while ensuring maximum air passage.
3. Exclusively formulated adhesive ensures glue seams will not break down.
4. Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox, while acting as a breathable gasket for increased air passage.
5. Fused outer and inner elements prevent dirt and grime from being lodged between layers. Trapped particles can restrict airflow. If dirt works it's way into your engine, a pinhead-sized granule will gouge your piston and rings like a bullet. 

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications

• Height : 1.625in (41mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Filter Re-Oiling Amount: 0.68oz (20ml)

Filters designed to fit with cut velocity stacks or straight pieces of exhaust tubing. Rubber filter bases come with moulded in velocity stack type radius and step, for smooth bore down from element to tube. Each filter has a rubber top with a stamped K&N logo. As with all K&N air filters, these are washable and reusable. Simply use K&N oil and cleaner to service your filter.

Features:

• Low restriction.
• Clamp-on design.
• Washable and reusable.
• Outstanding filtration.

Specifications:

• Filter Material: Cotton Gauze
• Outside Diameter: 89mm
• Height: 102mm
• Flange Inside Diameter: 54mm
• Flange Length: 25mm
• Flange Angle: 5 degrees

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs.

• Ignition cover gasket
• Designed to fit O.E.M. cover

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Supporting fast charging through both Type-A and Type-C ports, the Slimlime USB is ideal for powering mobile phones and satnavs. A splash-resistant silicone cap protects the ports, keeping your electronics safe and dry when not in use.

Designed for compact mounting alongside motorcycle switchgear, the kit offers a clean, OEM+ appearance. An in-line fuse safeguards your devices from potential power surges, ensuring reliable and safe operation.

Features:

• Max 5V, 3A output.
• Water-resistant cap.
• Fits 22-25?mm handlebars.
• Dual USB output.
• 1.8m cable.
• 0.5mA back drain current when not in use.
• Device-specific charging cable not included.

As modern UTV’s are improving every year, it is increasingly common to add accessories to them like stereos, lights, and winches. These are great upgrades, until you are stuck with a dead battery and can’t start the engine! RMSTATOR comes to the rescue with the best and most complete kit available to add a second battery to your UTV to power your accessories and monitor the charge of both batteries right from your dashboard!

The addition of a second battery to your vehicle to power your accessories allows you to safely use them all day without discharging your primary starting battery. If the voltage drops too low on your second battery, it will disconnect and isolate it from the main battery safely and automatically. When the motor is started, the secondary battery will be reconnected and recharged.

The included LED dual voltmeter installs on your dashboard, and lets you easily monitor the voltage of both batteries. The included wiring harness and relay allow the voltmeter to turn on and off with your keyswitch.

Everything you need for a complete installation is included!

Includes:

• Dual battery isolator relay

• 12” Black ground battery cable with terminal lugs

• 12” Red positive battery cable with terminal lugs

• 18” Red positive battery cable with terminal lugs

• Dual Red LED voltmeter (1.4” OD x 1” depth)

• Keyswitch voltmeter activation relay with socket and wires

• 96” wire harness for dual voltmeter connection to relay

• Terminals and connectors

Bolt Drain Plug Washer set to suit KTM.

Wossner is Germany's finest aftermarket forged piston and rod manufacturer and has over 25 years of experience in the high- performance racing industry. Top European racers and FIM World Champions rely on Wossner for only the best pistons, rods and customer service.

Features

• In-house designed and manufactured; all forgings are produced in Wossner's company-owned forging operation.
• Lightweight pistons with the tightest piston-wall clearances in the industry give you a quieter running engine.
• All pistons include piston, ring, wrist pin and pin locks.
• Wossner pistons are used by leading Supercross, Arenacross and MXGP teams.
• Made in Germany.

Specifications:

• Piston Size: 67.44mm
• Oversize: 0.50mm
• Nominal Bore Size: 67.50mm
• Number of Rings: Dual Ring
• Replacement Rings: 2x RSB6750
• Replacement Wrist Pin: WP033
• Replacement Circlip: CW18
• Replacement Needle Bearing: N1022

NOTE: Wossner Piston Kits include the Piston, Wrist Pin, Circlips and Ring(s), Needle Bearings are not included.

Wossner is Germany's finest aftermarket forged piston and rod manufacturer and has over 25 years of experience in the high-performance racing industry. Top European racers and FIM World Champions rely on Wossner for only the best pistons, rods and customer service.

Features

• In-house designed and manufactured; all forgings are produced in Wossner's company-owned forging operation.
• Lightweight pistons with the tightest piston-wall clearances in the industry give you a quieter running engine.
• All pistons include piston, ring, wrist pin and pin locks.
• Wossner pistons are used by leading Supercross, Arenacross and MXGP teams.
• Made in Germany.

Specifications

• Pis ton Size: XXmm
• Piston A

NOTE: Wossner Piston Kits include the Piston, Wrist Pin, Circlips and Ring(s), Needle Bearings are not included.

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

Crafted from military-spec certified TI3Al titanium alloy, Hot Cams Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

Features:

• Military-spec certified TI3Al titanium alloy.
• Forged from a single blank.
• PVD, CVD, and CrN coatings.
• Reduces heat generation.
• Resists carbon build-up.
• Significantly stronger than steel.

Specifications:

• Material: Titanium
• Valve Head Outer Diameter: 31mm
• Valve Length: 77mm
• Valve Stem Outer Diameter: 5.460mm

Features a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bird-caged wire ends, EPDM moulded rubber for high UV resistance and injection moulded components manufactured from high-strength POM material.

Features:

• Flexible and durable with steel inner casing that is tightly coiled for low compression.
• Pre-lubricated nylon inner sleeve.
• Bird caged wire ends.
• EPDM moulded rubber for high UV resistance and injection moulded components made from high-strength POM material.

Note: Kit contents may vary by fitment and are subject to change.

HFP replacement fuel pumps, modules, and assemblies are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration (intank pumps only)
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

A quality ball Joint kit from All Balls Racing.

Features:

• Bearing cup is made from POM-M90 to isolate steel rod from housing.
• Comes with snap ring and cotter pin.
• Saves you lots over OEM.

Ideal replacement for dirt bikes.

Features:

• Anti-swell alloy impregnated heavy-duty cork-based facings.
• Smooth clutch take up compared to paper clutches, which can ‘snatch’.
• Steel separator plates increase flywheel effect of the engine and improve performance.

PH SERIES – Street Sport Sintered

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

Wossner

For more than 35 years, Wössner successfully design and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Con Rod Kits

The Wössner 2-stroke connecting rods are always supplied with lifting pins, needle bearings, connecting rod bearings and spacers.
The Wössner 4-stroke connecting rods include crank pins and connecting rod bearings.
Please use our Fitments Tool to ensure the correct part is ordered.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.