HARD PARTS

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Replacement hardware sold in 10-pack.

High quality made in the USA. Contains all the parts you need to service your water pump.

K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong moulded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Features:

• Designed to increase horsepower and acceleration.
• Hundreds of sizes and shapes for most applications.
• High airflow with excellent filtration.
• Clamp-on washable and reusable air filter.
• Malleable flanges.

Specifications:

• Filter Material: Cotton Gauze
• Base Outside Diameter: 67mm
• Top Outside Diameter: 51mm
• Height: 76mm
• Flange Inside Diameter: 40mm
• Flange Length: 16mm
• Flange Type: Centred

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

For rear use only, these Bullet mini rear LED indicators with amber lenses are designed for ultra-low profile, flush fit mounting.

E-marked for road use and fully waterproof, these super bright replacement indicators offer an unrivalled aesthetic.

Features:

• Mini indicators with amber lens.
• 1 powerful LED with zinc case.
• Rear use only.
• E-marked.
• Specification: Voltage 12V, Power 2W
• M8 bolt: thread pitch 1.25
• Size: 16(w) x 26(d) x 23mm (L)

OEM spacers typically wear out within a year of hard riding. The wheel spacers should be checked and replaced as needed with every bearing service. Water and dirt act as a grinding compound between the seal face and the mating surface of the spacer. Once the grooves are deep enough, the sealing surface is lost, allowing water and dirt to pass through and contaminate the bearing.

Wheel Spacer Kits are designed to restore the proper sealing surface between the wheel seal and spacer, helping protect wheel bearings from premature wear and failure. Manufactured to precise tolerances for a direct replacement fit, All Balls spacers provide a smooth, durable surface for the seal to run against, reducing the risk of contamination and extending bearing life. Ideal for routine maintenance or during wheel bearing replacement, a quality wheel spacer kit ensures reliable wheel performance in harsh riding conditions.

The MotoPressor Puncture Repair Tool combines the four essential tools for tubeless tyre repair into one compact device.

This 4-in-1 multi-tool uses pre-vulcanized repair strings and packs neatly into a sheath measuring just 130 x 68 x 50mm—small enough to fit in your pocket. The tool includes pliers, a rasp, an insertion tool, and a sharp knife: everything you need to fix 99% of tubeless tyre punctures.

Because the repair strings are pre-vulcanized, there’s no need for glue. Each plug not only seals the hole but also forms a “patch-style” repair on the inside of your tyre.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to increase horsepower.
• Washable, reusable, and engineered to last for the life of your vehicle.
• Designed to provide high airflow and exceptional filtration.
• Engineered to fit easily into your factory air box.
• Only needs cleaning every 50,000 miles under normal highway driving conditions.

Specifications:

• Filter Material: Cotton Gauze
• Washable: Yes
• Height: 98mm
• Inside Diameter: 71mm
• Outside Diameter: 114mm
• Flange Length: 16mm
• Filter Re-Oiling Amount: 24ml

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Filter Material: Cotton Gauze
• Washable: Yes
• Height: 83mm
• Base Inside Diameter: 137mm
• Base Outside Diameter: 159mm
• Top Outside Diameter: 178mm
• Filter Re-Oiling Amount: 15ml

The most convenient one-stop-shop for maintaining your motorcycle. Kits include front brake pads/shoes, rear brake pads/shoes, an air filter with 1L of filter oil and an oil filter where applicable.

This kit includes:

GF041S3 - BRAKE PADS GOLDFREN GF041-S3
GF346K5 - BRAKE PADS GOLDFREN GF346-K5
PUTAFBE8144 - PUTOLINE AIR FILTER BE8144
PTAAFO1L - PUTOLINE ACTION AIR FILTER OIL 1LT (70005) *12
MFO631 - MOTO-FILTER OIL FILTER (HF631) SINGLE

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

A short section of Nitromousse that increases the PSI feel and extend the lifetime of your Nitro Mousse. Available for multiple sizes of Platinum and Soft Nitro Mousse.

If you've broken your mirrors, don't panic. We have you sorted with the range of OEM styled Whites Mirrors. Sold individually to reduce cost when only requiring replacement of one mirror. Built to meet and exceed OEM specifications at a fraction of the price, making the Whites Mirrors the perfect cost-effective replacement for your original mirrors.

Features:

• OEM replacement part.
• OEM styled.
• Screw mount type.
• Teardrop mirror design.
• Universal fitment.
• Competitive pricing.
• Sold individually.

Quality replacement Regulator/Rectifiers.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Quality replacement Ignition Coils.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Fuel pump strainers act as a first line of defence against fuel system contamination. Strainers filter out common contaminants found in gasoline such as dirt, dust and other particulate matter, as well as gasoline varnish. Quantum fuel pump strainers feature multiple layers of strainer media to filter progressively smaller particle sizes. The expanded surface area provides enhanced filtration, extending the life of the fuel pump.

Restricted fuel flow through a clogged strainer causes the fuel pump to work harder, reducing pump longevity. Strainer clogging is among the top causes of fuel pump failure making it important to replace your strainer regularly - before problems arise. We recommend replacing fuel pump strainers in powersports applications once a year as part of a preventative maintenance plan.

Features:

• Designed with gradient density to meet or exceed OE specifications.
• Designed to ensure optimal filtration to prevent fuel system contamination.
• Strainer material tested and validated for capacity and efficiency by accredited third party.

The Camshaft Chain Silent Kit is made from high-end materials giving incredible strength and durability, exceeding O.E.M. specifications and tolerances.

Do you push your dirt bike to the limit? If so, you understand the importance of having trusted protection parts that can withstand the rigours of off-road riding. Trail Tech Radiator Guards are built to thrive in the most rugged environments, safeguarding your ride.

Here are some reasons why Trail Tech Radiator Guards are an excellent investment:

• Designed to work with Trail Tech Fan Kits: Trail Tech Radiator Guards work seamlessly with Trail Tech Fan Kits, ensuring your bike stays cool in even the most extreme conditions. You can be confident that your bike’s engine will not overheat by pairing the two.

• Unobstructed airflow: Trail Tech Radiator Guards allow maximum airflow to your bike’s radiator fins, ensuring your engine stays cool, even in the hottest conditions.

• Forged/CNC lightweight design: Trail Tech Radiator Guards are built to last. Their light yet strong design protects against rocks, sticks, and other debris capable of damaging your bike’s radiators.

• Patent Pending Radiator Spigot Guards: Trail Tech’s patent-pending radiator spigot guards offer additional protection against damage to these essential components.

Additional benefits of choosing Trail Tech Radiator Guards:

• Brush and side impact protection: In addition to protecting your bike’s radiator from debris, Trail Tech Radiator Guards protect against brush and side impacts. Allowing you to ride with confidence.

• Trail Tech Warranty: We are so confident in our Trail Tech Radiator Guards that we offer a “life of the bike” warranty. This means you can ride confidently for as long as you own your bike.

• OEM factory mounting points: Trail Tech Radiator Guards are designed to fit seamlessly with your bike’s existing mounting points. This makes installation quick and easy, ensuring your Radiator Guards are secure for every ride.

Specifications:

• Rugged and Lightweight proven design
• Trail Tech fan kit integration
• Robust side impact protection
• Unobstructed airflow for enhanced cooling efficiency
• Patent Pending Radiator Spigot Guards
• Easy install using factory mounting points

NOTE: Modifications to the radiator shroud plastic are necessary to make these work with 2020 and up bikes. You must slightly trim the inner lip where the outside of the Radiator Guard meets the inner lip of the Radiator Guard shroud.