HARD PARTS

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Designed to meet or exceed OEM specifications, the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing.

Features:

• Premium high-speed bearings.
• Low drag.
• Double lip seals on both sides provide superior exclusion of water and dirt.
• Improved grease retention.

No-Toil Air Filters are built with the highest quality materials to ensure that they are long-lasting. Made with the finest dual-stage, flame-laminated foam to effectively stop dirt, and a high strength glue.

Features:

• No Toil manufactures the world's best 2-stage foam air filters.
• Using only the best flame-laminated dual-layer foam bonded with the highest quality glue, they hand-make each foam filter to stand up to the roughest and toughest of any style of riding or terrain.
• These filters, used with No-Toil foam filter oil, provide the best air filtration system in the world!

Quality replacement Starter Relay

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Quality ATV Steel Rim from Whites.

Specifications:

• Will suit front fitment for Polaris models — confirm suitability for model prior to purchase.
• Rim Size: 14"
• PCD: 4/156mm
• Offset: +63.5mm
• Colour: Black
• Load rating (per rim): 283kg

NGK have over 80 years of experience in spark plug manufacturing and are the world leader in spark plug technology. NGK has an extensive range of spark plugs, each with their own unique characteristics specifically engineered to its application and designed to suit a broad range of motorcycles, ATVs & UTVs in Australasia. With NGK's dedication to quality, outstanding reliability and state of the art manufacturing techniques, you can rely on your NGK Spark Plugs.

Don’t just ask for a spark plug, insist on NGK.

The improved throttle response, superior anti-fouling and high-ignitability make Iridium IX^® ideal for the performance enthusiast. Iridium’s extremely high melting point is perfectly suited to today’s high-temperature engines, delivering outstanding acceleration, fuel efficiency and durability.

• Fine iridium tip ensures high durability and a consistently stable spark
• Trivalent metal plating for superior anti-corrosion and anti-seizing properties
• Outstanding acceleration, high fuel efficiency and durability

Shell

• Thread Size: 10mm
• Thread Pitch: 1.0mm
• Seat Type: Gasket
• Resistor Value: 5K Ohm
• Reach: 19mm (3/4")
• Hex Size: 16mm (5/8")
• Terminal Type: Threaded Stud
• Overall Height: ISO
• Gap: 0.9mm (0.035")

Centre Electrode

• Material: Iridium
• Type: Fine Wire
• Size: 0.6mm
• Projection: Projected

Ground Electrode

• Material: Nickel
• Type: Standard
• Shape: Taper Cut
• Quantity: 1

Specifications

• Heat Range: 9
• Resistor: Yes

Whites Oil Filters are designed to trap harmful contaminants while still allowing a high oil flow rate.

Features:

• Designed for great filtration.
• Oil filter design provides for a high rate of oil flow.
• Filters available for almost all makes and models.

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Kit includes case-hardened bushing, replacement outer seal along with any O-rings, snap rings or lock washers required to complete the repair.

Features:

• Hardened bushings reduce wear and seal damage.
• Upgraded seal material reduces bushing wear and increases life.
• Brushing coating reduces corrosion.

Note: Verify fitment before purchasing.

The Whites Brake Calipers are designed to withstand harsh and extreme off- road environments and are the perfect cost-effective alternative to replacing your OEM brake calipers.

Including pre-fitted brake pads, mounting bracket, banjo bolt and crush washers, the caliper is ready to install on arrival. Whites Calipers are model and position-specific — we recommend using our fitment finder to find the correct caliper for your model.

Whites Brake Caliper also produces for one of the world's leading and most recognised OEM calliper names. Quality is assured when you buy Whites brand calipers.

Features:

• OEM replacement.
• Built to endure harsh riding environments.
• Includes banjo bolt and two crush washers.
• Includes pre-fitted brake pads.
• Includes mounting bracket and bolts.
• Includes removable brake pins.
• Cost-effective OEM alternative.

Constructed using spring steel material with a thick chrome plating the Whites Exhausts Clamps combine functionality with style. Simple and easy to fit with an included cross bolt which is made from zinc plated steel. Both the adjusting bolt and clamp are corrosion resistant to avoid the clamp seizing over time. Ideal for securing the motorcycles exhaust downpipes, headers, and mufflers.

Thick chrome plating
Spring steel construction
Zinc plated steel adjusting bolt
Simple and easy installation
Perfect for securing downpipes, headers and muffler

Clamp diameter: 44mm (1-3/4")
Colour finish: Chrome

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Specifications:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.
• Constructed with brass bushing for maximum performance with smooth operation.

All Balls manufactures a wide range of high-quality products to keep you out there on your Motorbike, ATV or UTV. All Balls Sintered Brake Pads are engineered to be extremely durable and dependable, while withstanding high-speed environments.

DENALI Motorcycle Specific Fairing / Fender Mounts

Available for most ADV, Cruisers and Sport Touring Models Laser cut and powder coated steel brackets either position the lights in the optimum location just below to the outside of the headlight, or create a two-point fender mount strong enough to mount our largest lights to your fender.

Whites lighting range is a collection of high-quality indicators (flashers), tail lamps, headlights and more. Available as direct OEM replacements and universal fitments for those one-off custom rides. Offered in a range of shapes, sizes, styles and mounting options Whites are here for your motorcycle lighting solutions.

Broken your old tail light assembly in a crash, or has it slowly deteriorated over time? Either way, Whites will get you back on the bike with this complete OEM replacement tail light assembly. Made with a high-quality acrylic lens and Polyethylene casing the Whites Tail Light Assembly will outperform and outlive your OEM assembly.

• OEM replacement
• Affordable price
• Constructed from durable acrylic
• Shatterproof
• Resistant to UV damage
• Casing Colour: Chrome
• Lens Colour: Red

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

OEM spacers typically wear out within a year of hard riding. The wheel spacers should be checked and replaced as needed with every bearing service. Water and dirt act as a grinding compound between the seal face and the mating surface of the spacer. Once the grooves are deep enough, the sealing surface is lost, allowing water and dirt to pass through and contaminate the bearing.

Wheel Spacer Kits are designed to restore the proper sealing surface between the wheel seal and spacer, helping protect wheel bearings from premature wear and failure. Manufactured to precise tolerances for a direct replacement fit, All Balls spacers provide a smooth, durable surface for the seal to run against, reducing the risk of contamination and extending bearing life. Ideal for routine maintenance or during wheel bearing replacement, a quality wheel spacer kit ensures reliable wheel performance in harsh riding conditions.

Brand new ignition cap coil.

Features:

• Direct replacement to your original unit.
• Quality exceeds the OEM equipment.
• All shipped products are tested.

Dimensions:

• Length: 133 mm
• Seal diameter: 38 mm
• Number of plugs: 1
• Number of terminals: 3

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Rack kit contains tie rod end and shaft that connect to the steering rack as well as the outer tie rod end, boot and the required hardware for one side.\

Applications:

• 2021 Polaris Ranger Crew XP 1000 Texas Edition EPS
• 2020 Polaris Ranger XP 1000 Premium
• 2020 Polaris Ranger XP 1000 Texas Edition
• 2021 Polaris Ranger Crew 1000 Premium
• 2021 Polaris Ranger Crew XP 1000 High Lifter Edition EPS
• 2021 Polaris Ranger Crew XP 1000 Northstar Premium EPS
• 2021 Polaris Ranger Crew XP 1000 Northstar Trail Boss EPS
• 2021 Polaris Ranger Crew XP 1000 Northstar Ultimate EPS
• 2021 Polaris Ranger Crew XP 1000 Premium EPS
• 2020 Polaris Ranger XP 1000 Northstar Ultimate

PH SERIES – Street Sport Sintered

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

Features a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bird-caged wire ends, EPDM moulded rubber for high UV resistance and injection moulded components manufactured from high-strength POM material.

Features:

• Flexible and durable with steel inner casing that is tightly coiled for low compression.
• Pre-lubricated nylon inner sleeve.
• Bird caged wire ends.
• EPDM moulded rubber for high UV resistance and injection moulded components made from high-strength POM material.

Note: Kit contents may vary by fitment and are subject to change.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Washa ble: Yes
• Filter Material: Cotton Gauze
• Height: 22mm
• Outside Length: 306mm
• Outside Width: 141mm
• Filter Re-Oiling Amount: 14ml

Kit contains direct OEM replacement bearing assembly with all the required components.

• Shock-bearing assemblies are sold individually for the upper or lower position.
• Plastic moulded bushings upgraded to machined Delrin.
• Mild steel pins upgraded to case hardened and precision ground SCM415/42 bearing steel.
• Many times, OEM manufacturers do not sell the components separately from the shock absorber.
• Where possible and applicable, we have added an o-ring to the ID of Delrin machined bushings for superior water and dirt exclusion.

Features a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bird-caged wire ends, EPDM moulded rubber for high UV resistance and injection moulded components manufactured from high-strength POM material.

Features:

• Flexible and durable with steel inner casing that is tightly coiled for low compression.
• Pre-lubricated nylon inner sleeve.
• Bird caged wire ends.
• EPDM moulded rubber for high UV resistance and injection moulded components made from high-strength POM material.

Note: Kit contents may vary by fitment and are subject to change.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Filte r Material: Cotton Gauze
• Washable: Yes
• Height: 32mm
• Length: 292mm
• Width: 230mm
• Filter Re-Oiling Amount: 47ml

All Whites inner tubes are developed to the highest technical specifications and quality standards. Constructed from high-quality butyl, we have the perfect range for your ATV, MXer or farm ride. Its butyl construction has significantly improved air retention properties when compared with natural rubber, ensuring your tubes stay inflated for longer.

Features:

• Constructed from high-quality butyl rubber.
• Better air retention than natural rubber.
• Competitive pricing.