HARD PARTS

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

The Whites Brake Calipers are designed to withstand harsh and extreme off-road environments and are the perfect cost-effective alternative to replacing your OEM brake calipers.

Including pre-fitted brake pads, mounting bracket, banjo bolt and crush washers, the caliper is ready to install on arrival. Whites Calipers are model and position-specific — we recommend using our fitment finder to find the correct caliper for your model.

Whites Brake Caliper also produces for one of the world's leading and most recognised OEM calliper names. Quality is assured when you buy Whites brand calipers.

Features:

• OEM replacement
• Built to endure harsh riding environments
• Includes banjo bolt and two crush washers
• Includes pre-fitted brake pads
• Includes removable brake pins
• Cost-effective OEM alternative

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

The Whites Inner Cable Bowden is a high-strength and durable inner cable, galvanised for corrosion and weather resistance. Supplied in a 25ft roll perfect for workshop use when creating custom length cables or replacing classic OEM cables that are no longer available.

Available in three different diameters, all in a 25ft roll, we have the ideal inner cable for you.

Features:

• Smooth operation.
• Ideal for custom cables.
• Diameter: 5mm
• Length: 25ft

Designed to meet or exceed OEM specifications, the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing.

Features:

• Premium high-speed bearings.
• Low drag.
• Double lip seals on both sides provide superior exclusion of water and dirt.
• Improved grease retention.

K&N Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. K&N Powersports Oil Filters trap harmful contaminants while the filter's construction allows for high oil flow rates.

Features

• High-performance design for outstanding filtration.
• High-efficiency media with uniform pleats.
• Oil filter design provides for a high rate of oil flow.
• Ideal for high-end synthetic motor oil.

Specifications

• Style: Cartridge
• Filter Material: High Flow Premium Media
• Gasket Material: Nitrile Rubber
• Height: 75mm
• Outside Diameter: 56mm
• Inside Diameter: 25mm

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Quality replacement components to rebuild one fuel tap. Improves service life and resistance to water and dirt.

Includes:

• Face screws
• Face gasket
• Wave washer
• Tank bolts
• Tank gasket
• O-rings

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Dimensions:

• Source diameter: 89mm

Other specifications:

• Number of wires: 6
• Number of pins: 6

Wire to wire resistance:

• Alternator: Green to Green = 1.6 ohms +-20%
• Pickup: Yellow/White To Black = 16 ohms +-20%
• Source: Brown to Black = 560 ohms +-20%

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Missing oil changes, or changing too often? Not sure when that top ends going to need replacing? Well, you can keep track of it all with a Whites Hour Meter. Keep track of your regular maintenance schedule with ease, the engine run time over a weekend of riding is surprisingly less than you think. The Whites Hour Meter will tell you exactly how long the engine has been going making it simple to service the ride at the manufacturers recommended intervals. Available in Blue, Green and Red to match your ride or in Black for a sleek look.

Digital display of engine run time
Easy installation, no battery, cutting or special tools required
Compatible with any spark plug equipped engine
Screws and double-sided adhesive included for mounting

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

All Balls Choke Plunger Kit

- Choke plunger rebuild kits are intended to be used as a repair kit only.
- Kit contents will vary and may include o-rings, springs, retaining nuts, boots and cable guides as necessary.
- Choke plungers can seize or can easily be lost during a carburetor rebuild.
- Improperly functioning parts can cause hard starting or poor running conditions.
- Models with multiple carburetors include components to repair each choke plunger.

Many Yamaha snowmobile owners received the mechanical diagnostic code Code 12 - Faulty Crankshaft Position Sensor from their on-board computer. This error code indicates that the position sensor connected to the stator is broken and that it cannot send the correct signal to the CDI box, which manages electrical distribution through the vehicle.

The solution proposed by Yamaha dealers is to replace the complete stator at excessive pricing. RMStator's Crankshaft Position Sensor allows you to replace only the part that is broken without changing the complete stator for significantly less than the dealer's solution's price.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The Whites Grip Donuts are designed to prevent blisters on the inside of your thumb and index finger while providing additional grip.

Prevents blisters on thumb and index finger
Available in Black, Blue, Green, Orange & Red

The Whites Grip Donuts are designed to prevent blisters on the inside of your thumb and index finger while providing additional grip.

Prevents blisters on thumb and index finger.

The Whites Alloy Swingarm Clamp Foot Pegs are a complete set of folding rear foot pegs for Honda XR's. The set includes mounting brackets for the swingarm which provides a resting spot for a rear passenger. Constructed from aluminium for corrosion resistance and strength, with a rubber ribbed body to prevent the passenger's feet from slipping. Designed with an aluminium end cap to prevent damage to the rubber body and foldable when not in use.

• High-quality rubber prevents splitting
• Foldable for when not in use
• Aluminium body and end cap
• Corrosion-resistant
• Quick and easy installation

Features a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bird-caged wire ends, EPDM moulded rubber for high UV resistance and injection moulded components manufactured from high-strength POM material.

Features:

• Flexible and durable with steel inner casing that is tightly coiled for low compression.
• Pre-lubricated nylon inner sleeve.
• Bird caged wire ends.
• EPDM moulded rubber for high UV resistance and injection moulded components made from high-strength POM material.

Note: Kit contents may vary by fitment and are subject to change.

A faulty crankshaft position sensor can cause engine misfires, stalling, poor fuel economy, rough running or prevent the engine from starting.

The crankshaft position sensor monitors engine rotation to provide precise ignition and fuel timing, ensuring smooth operation, optimal performance and efficiency.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

If you're burning the midnight oil, Whites has your lighting requirements sorted with their range of five LED light bars.

The 13.5-inch double row light bar features 24 LED lamps generating a total of 5,040 lumens while using only 72 watts of power. It's perfect for mounting on your ATV or UTV and comes with 4 metres of wiring cable. The flood and spotlight combination provides optimal visibility for working at night.

Features:

• Ideal for farming ATVs and UTVs
• 13.5"" LED light bar (double row; other sizes available: 6"" single row, 21.5"", 31.5"", and 41.5"" double row)
• Spot and flood beam combination
• Includes 4m of wiring cable
• Compatible with 6V to 24V systems
• Waterproof rating: IP67
• Colour temperature: 6000K
• Housing material: Aluminium
Lens material: Polycarbonate (PC)
• Wattage: 72W
• Size: 13.5" (34.3 cm)

Kit contains the necessary seals to repair oil leaks and rebuild the transaxle. Direct OEM replacement at a fraction of the cost.

Note: Verify fitment before purchasing.

Designed to keep your differential in top condition, this kit includes high-quality seals that prevent leaks and protect against dirt, water, and debris. Easy to install and compatible with a wide range of ATV and UTV models, our differential seal kit provides a cost-effective solution to prevent costly repairs and downtime. Fit these and have peace of mind.

Features:

• Double lip type TC seals.
• Front or rear position sold separately.

Note: Contains seals only. Verify fitment before purchasing.

WHITES REPLACEMENT BRAKE SHOES

• OE quality replacement brake shoes
• Edge trimmed and radius ground to ensure these brake shoes fit exactly into the drum
• Linings are bonded and chamfered on the ends
• Made from high-pressure die-cast aluminium

Wossner

For more than 35 years, Wössner successfully design and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Con Rod Kits

The Wössner 2-stroke connecting rods are always supplied with lifting pins, needle bearings, connecting rod bearings and spacers.
The Wössner 4-stroke connecting rods include crank pins and connecting rod bearings.
Please use our Fitments Tool to ensure the correct part is ordered.

The Whites OEM replacement cast clutch perch provides an economical alternative to original levers. The perfect replacement for when your perch has broken or thread stripped. In an OEM long lever design to improve feel and braking.

Features:

• Direct OEM replacement cast perch.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Includes perch.
• Made from die-cast aluminium for maximum durability and affordability.

These tapered DAC bearing kits offer great static performance and dynamic load capacity. The high-performance, tapered bearing delivers a 95% static load and 86% load-carrying capabilities, on average, when compared to standard DAC bearings.

Features:

• High contact, double-lip seal with armour shield.
• O-rings feature a sealed ID to provide superior water and dirt exclusion.
• 52100 bearings are hardened and tempered steel for maximum durability.
• Sold individually.

The Trail Tech TTO Temperature Switching Fan Kit, Motorcycle Radiators, Yamaha WR450F 2012-2015 monitors your Yamaha cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

Specifications:

• Physical Dimensions: 210 x 120 x 85mm (8.2 x 4.7 x 3.3")
  Note: This will vary by fan kit.
• Weight: 23 oz. (652g)
• Digital Display: Trail Tech TTO Fan Controller
• Screen Size: 23.7x13.6mm (.93x.53in)
• Air Flow: 147 CFM
• Power Requirements: 12V DC only
• Amp Draw: 3 Amps
• Watt Draw: 30 Watts
• NOTE: Please make sure bike has necessary power available.
• On bikes that have a regulated thermostatically controlled harness (this includes all new KTM and Husqvarna EFI 2 strokes) you will need to install an extended wire harness (sold separately) back to the battery and attached the fan kit to that wire harness.

Features:

• High-Quality Construction: The fan itself is top quality, made from durable high-impact plastic with exceptional air flow, the bracket is made from high-quality black coated steel, and the wiring harness is constructed with weather-resistant materials to stand up to even the toughest conditions.
• Easy Installation: Worried that adding a fan to your bike will be a complicated, time-consuming process? With the Trail Tech Fan Kit, you don't have to be. Our model-specific fan kits mount easily to your bike's factory mounting points on the OEM radiator. Plus, it's compatible with Trail Tech Radiator Guards, allowing you to protect your investment from damage while you ride.
• Enhanced Cooling: The fan is designed to provide maximum airflow to your bike's radiator, helping to keep your engine running cooler and more efficiently. This can help prevent overheating and engine damage.
• Automatic Activation: The Trail Tech Fan Kit automatically activates the fan at the temperature that you select to keep your engine at the optimum temperature range for your riding situation. The temperature sensor easily mounts in-between your radiator's cooling fins. You don’t have to splice any coolant lines.
• Wiring Harness: The Trail Tech Fan Kit comes with an included high quality wiring harness and a low 30-watt power draw. Make sure your bike has the necessary power available to keep your bike running cool on slow, technical trails.
• Model Specific: The Trail Tech Fan Kit is designed to fit with stock radiator, gas tank. The kit contains everything you need for installation, including model-specific instructions. You won't have to worry about cutting fluid lines, as the temperature sensor fits between radiator fins. The provided wiring harness runs to the battery and includes a fuse.
• Enhanced Safety: Overheating can be dangerous, especially when you're far from civilization. When your engine is running at the right temperature, it will perform at its best. Keep your engine cool and avoid difficult riding situations. Enjoy your ride with peace of mind.

Brake shoes