New Arrivals

Master Cylinder Repair Kits

• Kits contain all of the components to re-seal leaking master cylinders.
• Kits contain copper washers, replacement screws where applicable, cup seals, o-rings and replacement piston.

MTX solid discs are constructed using one complete segment of Japanese SUS 420 stainless steel, then heat-treated to HRC 36+-2. Lightening and drill hole patterns are as per OEM designs to improve braking performance and reduce the temperature of the disc.

MTX Discs provide amazing braking control for your motorcycle. All MTX discs are designed and manufactured with world-leading, cutting edge technologies:

• Precision CNC machined and laser-cut technology
• Japanese SUS 420 Stainless Steel
• Replacement for Original Equipment
• OEM Design; lightening & drill hole patterns

Specifications:

• O.D: 240mm
• I.D: 105mm
• Minimum Thickness: 4.5mm
• Disc Position: Rear

Quantum replacement fuel pumps, regulators, tank seals and strainers are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

Features

• OEM or better performance
• Coated corrosion-resistant case to minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

An economical way to reseal a leaky carburettor.

Features:

• Includes one gasket per kit (Multi carburettor bikes will require multiple kits).
• Applications that use paper float bowl gaskets are upgraded to high-performance interface gasket material.
• NBR rubber is used for gaskets (NBR has excellent resistance to ethanol used in today's fuels.)

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

All products shipped are tested.

Dimensions:

• Exterior Diameter: 121 mm
• Exterior Diameter #2: 119 mm
• Interior Diameter: 107 mm
• Interior Diameter Center Housing: 19.2 mm
• Exterior Diameter Center Housing: 34 mm
• Thickness (exterior): 34.8 mm
• Thickness (interior): 30 mm

Ideal replacement for dirt bikes.

Features:

• Anti-swell alloy impregnated heavy-duty cork-based facings.
• Smooth clutch take up compared to paper clutches, which can ‘snatch’.
• Steel separator plates increase flywheel effect of the engine and improve performance.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

One kit does it all! All of the bearings, seals, shafts*, bushings, and thrust bearings (if required) in one all-inclusive kit to do the job correctly and completely.

• All bearing shafts manufactured with 52100 bearing steel that is hardened and centerless ground for a precision fit and extended wear life.
• Steel spacers are case-hardened and plated for resistance to wear and corrosion.
• No more hunting around for missing pieces costing you time and extra money.
• Needle thrust bearings have been replaced with Teflon bearings. Designed to live longer in water and dirt.

* Not included in all kits.

Note: A limited number of kits only available with bearings and seals.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

The CLIQR Out-Front Mount offers the ideal aerodynamic position with a robust yet lightweight glass-filled Nylon body and durable stainless steel fixtures.

What's included:

• 1x Mount
• 2x Device Adaptors
• 2x Silicone Inserts (25.4mm - 31.8mm stem)
• 1 x Alcohol wipe

The Coyote Saddlebag is Giant Loop’s original rackless design for packing up to 39 litres of gear on multi-day rides. Built with highly resistant Bomb Shell™ materials, it’s a must-have for transporting gear through even the toughest terrain. The Coyote can be mounted to the rear fender or tail rack of virtually any dirt bike, dual-sport, or enduro motorcycle. Includes waterproof inner liner Saddlebag Dry Pods™ and a 25-inch Pronghorn Strap™ for complete waterproofing and easy installation.

Lightweight Construction: Weighing only 4.25 lbs (without accessories), the saddlebag minimises impact on bike handling and performance. Total weight is 5.8 lbs with included Dry Pods and heat shield.

Rugged and Weatherproof: Built from durable Bomb Shell™ materials, the Coyote is highly resistant to water, dust, and extreme weather conditions — perfect for demanding adventure terrain.

Durable and Protective: Designed to shield your gear from debris and moisture, ensuring contents stay safe and dry no matter the conditions.

Features:

• Compress Your Gear: Side compression straps with integrated grab handles make it easy to carry, push, pull, or lift the motorcycle in case of a tip-over.
• No Burns: Includes Hot Springs Heat Shield™ to prevent exhaust heat damage to the saddlebag or side panels.
• Add-On Storage: Expand capacity by adding a Rogue™ or Tillamook™ Dry Bag and/or Possibles Pouch™ (available separately).
• Mounting Options: Offers two rear mounting configurations — anchors to the rear fender or GL Tail Rack using the included Pronghorn Strap™ and fender hooks to fit virtually any bike or tail rack.

Specifications:

• Volume: 39 litres (2,380 cubic inches) of packable volume.
• Dimensions
  • 62″ (156 cm) from the bottom of one pannier, across the top, to the bottom of the other.
  • 7″ (18 cm) height at the top centre.
  • 6″ (15 cm) depth from inside to outside of the pannier bottom.
  • 9″ (23 cm) front to back at the top centre.

• Dry Weight: 5.8 lbs (2.6 kg) including all components.
• Materials: Rugged Bomb Shell™ materials with double-reinforced ballistic nylon impact zones.
• Completely waterproof, mudproof, snowproof, and dustproof when used with included Dry Pods™.

What's Included:

• Hot Springs Heat Shield
• Dry Pods
• Pronghorn Straps

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust and protects axles from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defence, shielding vulnerable joints and preventing leaks. High-performance molybdenum grease reduces heat and friction.

In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Neoprene boots.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.
• Engineered in the USA.
• Manufactured in an ISO facility.Assembled with 3% molybdenum grease.

NOTE: This Vertex Oil Seal Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include all oil seals necessary to rebuild the engine and transmission including crankshaft, output shaft, water pump, clutch, and shifter seals.

A quality pair of fork oil and dust seals from All Balls Racing.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs outside of the seal allow easy installation.
• Dual-sealing lips guarantee oil stays in and dirt stays out.

Quality design and construction: This rear shock seal head kit meets the toughest standards and conditions - from daily commuting to full-on racing.

Features:

• Made from 6061-T6 aluminium to save weight.
• Features an air bleed hole. This helps remove air from the oil reservoir during seal head installation.
• The oil seal utilises a double lip design and a low-friction elastomer. This gives the seal head additional dirt exclusion and yet maintains a low-drag (low-friction) seal.
• The dust seal utilises a spring-type exclusion seal to maintain constant pressure and ensure good dirt and contaminant exclusion over the life of the seal head.

Hands down, the most complete line of linkage bearing and seal kits!

Kit contains all of the components required to properly rebuild the linkage bearing assembly. Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground.

All metal bushings are case-hardened and plated to prevent wear and corrosion.

POM composite washer bearings replace thru needle washers, increase service life, and add superb resistance to water and dirt.

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

The Oxford Aquatex bicycle cover is a lightweight bike cover for use indoors and outdoors. As you would expect from the world's best- selling cycle cover, it comes packed with useful features and is built to last.

Designed for indoor/outdoor use, it offers protection against rain and dust. Local police initiatives have shown that bike covers can be a useful anti-theft device - if a thief can't see what kind of bicycle is underneath, they are less likely to target it. Combine with one of our award-winning chain locks to add an additional layer of defence against any would-be bike thief.

Features:

• Double-stitched 100 Denier polyester for strength and durability.
• Complete exterior and interior protection. Can be used both as an outdoor rain cover and an indoor dust cover.
• An elasticated base holds the cover in place for a snug fit.
• Comes with a zipped carrier to store away compactly when not in use.
• Strong but lightweight material is UV-resistant, so it does not degrade in sunlight.
• Double PU coating for optimal waterproofing.
• Storage case provided.
• Available in three sizes. Sized for 1, 2 and 3 bikes

IMPORTANT: Do not allow this cover to come into contact with hot parts or sharp objects.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.