New Arrivals

Oblong key blank for the following Oxford locks.

• OF50/OF51 Titan
• OF48/OF49 Mini-T
• OF33/OF34 Junior
• OF143/OF144 Hercules U-lock
• OF334 Tripwire
• OF221 Looplock
• OF178/179 GP Chainlock
• LK104-6 GP Chainlock8
• LK107-109 GP Chainlock10
• OF163 Barrier Chain
• LK330-2 Shackle12

Dimensions:

27 x 2.76 x 6.5 x 1.9mm (Alternative Key 6)

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust, and protects axle from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defense, shielding vulnerable joints and preventing leaks. High performance molybdenum grease reduces heat and friction.

• In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% molybdenum grease.

A standard bulb from Whites' comprehensive range of electrical bulbs.

Includes:

• 6v
• 12v
• Instrument
• Capless
• Flasher
• Stop-tail
• Pre-focus
• Halogen headlamp.
  
  

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

Features a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bird-caged wire ends, EPDM moulded rubber for high UV resistance and injection moulded components manufactured from high-strength POM material.

Features:

• Flexible and durable with steel inner casing that is tightly coiled for low compression.
• Pre-lubricated nylon inner sleeve.
• Bird caged wire ends.
• EPDM moulded rubber for high UV resistance and injection moulded components made from high-strength POM material.

Note: Kit contents may vary by fitment and are subject to change.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

• Comprehensive kit for transmission rebuild, includes bearings, seals, o-rings, and shims.
• Affordable alternative to OEM replacement parts.
• Utilizes high-quality ABEC 3 precision ball bearings for durability and performance.
• Sourced components, including ball bearings, needle bearings, tapered bearings, PTFE lined bearings, seals, and o-rings, from reputable manufacturers worldwide.
• Kits with tapered bearings come with a selection of shims for customization.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

4-pack of replacement Fuel Star fuel line clamps for the All Balls Complete OEM Style Fuel Line Clamp Kit.

• Inside Diameter: 9.9mm
• Clamp Style: Wire
• Quantity: 4

PAIR

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

- Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machines top performance
- Utilizes stock mounting hardware (not included) for a great fit
- Hand-welded aluminium design for a great look and functionality
- Includes a new radiator cap

Brand new aftermarket handlebar switch

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

Functions:

• Lights: Off / Low / High
• Kill Switch: On / Off

Other specifications:

• Number of wires: 2
• Number of pins: 4
• Wire Length: 450 mm

MTX Hornet Disc and Premier Pad Rear Kits are the perfect brake maintenance kit for your bike, including a strong and durable MTX Hornet Brake Disc, constructed from SUS 420 stainless steel and heat-treated to HRC 36+-2 paired with high-quality Premier PR Series Sintered Brake Pads that have been upgraded to a HIGH DENSITY sintered metal compound suitable for all types of MX. The perfect alternative to expensive OEM replacements while designed to meet and exceed OEM specifications.

Kit contents:

• MTX Hornet Brake Disc Solid Wave Type Rear - MDHS07003
• Premier Brake Pads Full Sintered Moto X - PBPR392

About the Hornet Wave Discs

Using Lightweight induction hardened stainless steel, the Hornet Wave discs offer superior strength and durability while using MTX’s innovative technology to keep you in control under high-stress braking. Constructed using one complete segment of SUS 420 stainless steel, then heat-treated to HRC 36+-2. MTX’s Wave technology ensures your discs stay cool through high-strain environments.

Disc Specifications:

• O.D: 270mm
• I.D: 115mm
• Minimum Thickness: 3.5mm
• Disc Position: Rear

NOTE: RIGHT RADIATOR ONLY, FOR LEFT SEE WPRAD126L FOR PAIR SEE WPRAD126P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

The fuel filter protects your vehicle's engine from fuel contaminants such as dust, dirt, and other impurities that build in the fuel tank. Over time, the fuel filter can build up enough debris in the filter medium, restricting fuel flow and fuel pressure. We recommend replacing fuel filters every 32,000km or 2 years for the best protection.

Fuel Filter Failure Symptoms:

• Low fuel pressure
• Poor engine performance
• Hesitation on acceleration
• Failed fuel pump

Featuring a 180-degree lever pivot action, the Whites Folding Clutch Levers are a must-have on any dirt bike.

In the unfortunate event of a crash. the lever simply turns back on itself and out of harm's way, preventing breakage of your lever. When you're back up, a high-tension spring returns the lever to its original position and you're ready to rip.

With a sleek silver finish or anodized black, red and blue (model-dependent) that gives an awesome factory look.

Specifications:

• Durable forged and anodized lever arm.
• Lever folds outward to prevent breakage in the event of a crash.
• Lever adapter is ultraprecise CNC machined out of high-grade aluminium for a super-light design.
• High-tension spring keeps the lever in place while riding.
• Constructed with brass bushing for maximum performance with smooth operation.
• Function with style.

Quality light bar bracket.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

The Whites OEM replacement cast clutch perch provides an economical alternative to original levers. The perfect replacement for when your perch has broken or thread stripped. In an OEM long lever design to improve feel and braking.

Features:

• Direct OEM replacement cast perch.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Includes perch.
• Made from die-cast aluminium for maximum durability and affordability.

Brake shoes 

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s ATVs and UTVs.

• 40% higher tensile strength than conventional CV boo material, suitable for the high joint angles of modern ATVs and UTVs.
• 50% more abrasion-resistant than conventional CV boot material to ensure a long life in harsh off-road environments.
• Rubber compound is tested to -40° F to ensure good performance and long life at low temperatures.
• Lithium-based Molybdenum Grease insures good lubrication for long CV joint life. Easier to install than most OEM and aftermarket boots. Sold each. Does not require the use of a ""Banding Tool"".

Specifications:

• H: 82mm
• SD: 18mm
• LD: 66mm
• Shaft I.D.: 18
• CV Body I.D.: 66
• Length: 82

Kits include:

• Two stainless steel clamps that are designed to be tightened without the use of special tools.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

PH SERIES – Street Sport “Sintered”

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. Available for part numbers shown below - prefix with “PH to specify. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

NB: Please confirm suitability for your year, make, model prior to purchase.