New Arrivals

Brake shoes 

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

Dimensions:

• Height: 80 mm
• Length: 70 mm
• Width: 47 mm

Other specifications:

• Number of pins: 12
• Number of plugs: 2

Whites Gear Levers are manufactured from high-quality forged alloy, improving strength and durability. Featuring a spring-loaded black knurled tip reducing the risk of damage while giving additional grip.

Features:

• OEM replacement forged alloy gear shift lever.
• Sprung loaded tip to reduce the chance of damage during a crash.
• Tougher than stock and much more affordable.

Ideal replacement for dirt bikes.

Features:

• Anti-swell alloy impregnated heavy-duty cork-based facings.
• Smooth clutch take up compared to paper clutches, which can ‘snatch’.
• Steel separator plates increase flywheel effect of the engine and improve performance.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Whites lighting range is a collection of high-quality indicators (flashers), tail lamps, headlights and more. Available as direct OEM replacements and universal fitments for those one-off custom rides. Offered in a range of shapes, sizes, styles and mounting options Whites are here for your motorcycle lighting solutions.

Constructed to meet and exceed OEM specifications this flasher by Whites is the perfect fit for your ride. Designed to give bright and clear light for optimal signalling. Replace your damaged or broken OEM flasher with the Whites Flasher for a fraction of the price. Built to match OEM style and mounting, you can install your new flasher with ease while utilising your OEM mounting hardware.

Features:

• Meets and exceeds OEM specifications.
• OEM replacement part.
• Utilises OEM mounting hardware.
• Durable construction.
• E-Marked.
• Fitment Location: Right Front/Left Rear
• Colour: Black
• Light Type: Bulb

Note:

Please see FLUSSVL for the opposite fitment location.

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, our Garage Signs are also the perfect gift for the biker who's got it all!

Key Features
• Indoor use only
• Made from high quality coated metal tin plate with rolled edges
• 4 x 3.2mm pre-drilled holes for attachment
• Dimensions - 30 x 20cm x 0.25mm thick
• Weight - 124g

A complete pillow block assembly with high-contact bearing seals replaces OE assembly, for more robust drive shaft support.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Dynamic and ultra-flexible and lightweight protectors, ideal for casually-styled motorcycle garments.

Features:

• CE Level 2 (EN 1621-1:2012)
• Ultra lightweight.
• Ultra flexible.
• Slim profile - only 9.3mm thick.
• Ventilated.
• Adaptive impact absorption.
• Multi impact compliant PU-foam.

The Whites Brake Calipers are designed to withstand harsh and extreme off-road environments and are the perfect cost-effective alternative to replacing your OEM brake calipers.

Including pre-fitted brake pads, mounting bracket, banjo bolt and crush washers, the caliper is ready to install on arrival. Whites Calipers are model and position-specific — we recommend using our fitment finder to find the correct caliper for your model.

Whites Brake Caliper also produces for one of the world's leading and most recognised OEM calliper names. Quality is assured when you buy Whites brand calipers.

Features:

• OEM replacement
• Built to endure harsh riding environments
• Includes banjo bolt and two crush washers
• Includes pre-fitted brake pads
• Includes removable brake pins
• Cost-effective OEM alternative

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Direct OEM replacement cast levers
Designed to exceed OEM specifications
Built to resist breakage
Designed to fit OEM perch
Made from die-cast aluminium for maximum durability and affordability

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust and protects axles from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defence, shielding vulnerable joints and preventing leaks. High-performance molybdenum grease reduces heat and friction.

In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Neoprene boots.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.
• Engineered in the USA.
• Manufactured in an ISO facility.Assembled with 3% molybdenum grease.

Crafted from military-spec certified TI3Al titanium alloy, Vertex Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

• Military-spec certified TI3Al titanium alloy
• Forged from a single blank
• PVD, CVD, and CrN coatings
• Reduces heat generation
• Resists carbon build-up
• Significantly stronger than steel

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

All Whites inner tubes are developed to the highest technical specifications and quality standards. Constructed from high-quality butyl, we have the perfect range for your ATV, MXer or farm ride. Its butyl construction has significantly improved air retention properties when compared with natural rubber, ensuring your tubes stay inflated for longer.

Features:

• Constructed from high-quality butyl rubber.
• Better air retention than natural rubber.
• Competitive pricing.

Designed to meet or exceed OEM specifications, the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing.

Features:

• Premium high-speed bearings.
• Low drag.
• Double lip seals on both sides provide superior exclusion of water and dirt.
• Improved grease retention.

A Quality Fork Bush from All Balls Racing. 

*This is just a single bush

All new assembly sold complete with Hot Rods connecting rod.

• The Hot Rods complete crankshaft includes their famed connecting rod; durability at a level OEM rods can only dream of.
• Factory assembled and trued to O.E.M. specifications, Hot Rods cranks will meet or surpass the OEM in performance. Hot Rods makes installing the complete crankshaft simple and easy.
• Crankshaft is completely rebuildable with genuine Hot Rods connecting rods.

Note: Crank bearings and seals sold separately.

With certain BMW motorcycle models, the spark plug caps and coils are combined to reduce the number of parts used in order to improve efficiency. However, when the spark plug cap wears out, the cost of the replacement becomes more expensive. If you are experiencing ignition problems, this could mean the ignition cap coil needs to be replaced. Simple, easy to install, affordable, and improves engine performance.

Features:

• Direct replacement to your original unit.
• Quality exceeds the OEM equipment.
• All products shipped are tested.

Dimensions:

• Interna l tube diameter: 9 mm
• Length: 126 mm
• Seal: 42 mm
• Number of plugs: 1
• Number of terminals: 2
• Primary : 1.7 ohms
• Secondary : 7.9k ohms

TRX420 / TRX500 14-17 Front Left-hand

Off-road adventures demand rugged reliability, and our ATV Steering Knuckle is designed to withstand the harshest terrains while providing you with precise control. When you're ready to conquer the great outdoors, trust in a steering knuckle that keeps you in command.

Features:

• Built Tough for Off-Road Dominance: Crafted from high-strength materials, Whites ATV Steering Knuckle is engineered to handle the toughest challenges nature can throw your way.
• Trail-Tested Durability: Off-roading can be punishing on your vehicle, but our steering knuckle is up to the challenge.
• Precision Control: Our steering knuckle ensures your vehicle responds with accuracy to your every command, giving you the confidence to take on any terrain with ease.

Includes all gaskets and o-rings necessary to complete a crank (bottom end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set is your one-stop shop for engine rebuilds.

• Designed for OEM replacement
• Made from high-quality materials
• Meet or exceed OEM specifications
• Competitive pricing

Brand new aftermarket Voltage Regulator Rectifier

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• No assembly required
• Higher grade of electric components
• The quality exceeds the OEM equipment
• All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and are a major cause of repetitive electrical issues.

All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.

Specifications:

Dimensions:

• Width: 110 mm
• Length: 80 mm
• Height: 28 mm
• Distance between fixation holes center to center: 84 mm

Other specifications:

• Number of plugs: 2
• Number of pins: 4
• Number of wires: 0
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

Note: Battery condition is important. No regulator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY