New Arrivals

K&N Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. K&N Powersports Oil Filters trap harmful contaminants while the filter's construction allows for high oil flow rates. K&N Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.

Features

• High-performanc e design for outstanding filtration.
• High-efficiency media with uniform pleats.
• Oil filter design provides for a high rate of oil flow.
• Ideal for high-end synthetic motor oil.

Specifications

• Style: C Material: High Flow Premium Media
• Gasket Material: Nitrile Rubber
• Outside Diameter: 44mm
• Inside Diameter: 14mm
• Height: 49mm

Quality replacement components to rebuild one fuel tap. Improves service life and resistance to water and dirt.

Includes:

• Face screws
• Face gasket
• Wave washer
• Tank bolts
• Tank gasket
• O-rings

These sensors and switches monitor temperatures. If faulty, they either send signals to the machine's electrical "brain" which can activate a warning light, shut down that part of the system, or shut down the entire engine. Usually, these are located in the cylinder block, oil cooler, or in the cooling system.

Switches are set up per specific temperatures. Some turn on at a specific temp, and some turn off when the area being monitored by the switch reaches that temperature. At that point, the "brain" will activate or deactivate another device, such as a fan.

An economical way to reseal a leaky carburettor.

Features:

• Includes one gasket per kit (Multi carburettor bikes will require multiple kits).
• Applications that use paper float bowl gaskets are upgraded to high-performance interface gasket material.
• NBR rubber is used for gaskets (NBR has excellent resistance to ethanol used in today's fuels.)

• Save time when replacing your worn out ball joints
• When Whites adjustable ball joints are installed and you find excess play, simply adjust the play away WITHOUT having to remove the ball joint from your bike
• Check attached instruction to learn just how simple this process is.
• Whites Ball Joints are made from high quality materials and now the service life is even longer!

*Available only for select model fitments at this time.

Power up while you’re on the go with this 12 volt adapter. It’s your in-vehicle charger when you’re off-road.

Fits:

• Tread - Overland Edition
• Tread - SXS Edition
• Tread XL - Overland Edition

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

HFP replacement fuel pumps, modules, and assemblies are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration (intank pumps only)
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

This vehicle-specific driving light mount allows you to mount any DENALI driving light in the optimum location on your motorcycle.

The unique design of this lower mounting bracket allows you to hang the lights below the factory turn signals, or mount lights on top of the bracket in place of your factory turn signals.

This is the ideal setup for riders who want to position aux lights in place of the factory front turn signals.

Fitment Note: This mount is not compatible with the factory Harley-Davidson engine guards (crash bars). If you have crash bars installed you can mount DENALI lights in a similar location directly to your crash bar using Denali crash bar light mount LAH.00.10300.B.

This kit includes a beefy powder-coated steel bracket with M8 mounting holes for the lights and all necessary mounting hardware.

Specifications:

• Weight: 1.8 lb

HFP replacement fuel pumps, modules, assemblies, and kit components are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

Features:

• OEM or better performance.
• Polished corrosion-resistant case to help minimize seizing during non-operation.
• Specifically designed for quiet operation.
• Drop-in replacement.
• Gradient density fuel strainer for superior contaminant filtration.
• Patented check valve technology.
• Compatible with modern ethanol-infused pump gasoline.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Brake shoes 

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Ideal replacement for dirt bikes.

Features:

• Anti-swell alloy impregnated heavy-duty cork-based facings.
• Smooth clutch take up compared to paper clutches, which can ‘snatch’.
• Steel separator plates increase flywheel effect of the engine and improve performance.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Aluminium weighted bar end for standard 22mm diameter handlebars.

Key Features
• Made from CNC aluminium
• Real carbon fibre insert
• 13 & 18mm expansion bushes included
• Includes 5mm hex key

Brand new aftermarket Voltage Regulator Rectifier

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• No assembly required
• Higher-grade of electric components
• The quality exceeds the OEM equipment
• All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and are a major cause of repetitive electrical issues.

Specifications:

Dimensions: p>

• Width: 48 mm
• Length: 90 mm
• Height: 19 mm
• Wires length: 190 mm
• Distance between fixation holes center to center: 75 mm

Other specifications:

• Number of plugs: 2
• Number of pins: 4
• Number of wires: 4
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

Mint Dry Weather Lube is specially formulated with selected oils, PTFE and fewer solvents to generate a high film-forming capability; this works to produce a stronger and more robust film, reducing 'fling' and improving chain protection in dry and dusty conditions. PTFE content fills the gaps between moving parts to reduce dirt ingress.

Superior lubrication your pride and joy deserves.

Features:

• Long-lasting protection and lubrication.
• Helps maintain the performance of chains and drive chains.
• Ideal for dry and dusty conditions.
• Special formulation with PTFE helps prevent dirt and grime adherence.
• Long-lasting protection and lubrication.
• Great for chains, sprockets, O, X, and Z rings.
• Mint scented.
• Not tested on animals.

How to use:

1. Clean the chain with Mint Chain Cleaner prior to application.
2. Shake the can well and apply to the full length of the inside of the chain, rotating the wheel slowly by hand. Motorcycle: Do not use the motor to rotate the wheel.
3. Spray directly onto required areas.

Note: Keep away from brake components.

K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong moulded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Features:

• Designed to increase horsepower and acceleration.
• Hundreds of sizes and shapes for most applications.
• High airflow with excellent filtration.
• Clamp-on washable and reusable air filter.
• Malleable flanges.

Specifications:

• Filter Material: Cotton Gauze
• Outside Length: 216mm
• Outside Width: 95mm
• Height: 60mm
• Flange Centre to Centre: 95mm
• Flange Inside Diameter: 52mm
• Flange Length: 16mm

The GP Chain 6 is an incredible value, multi-purpose chain lock. The GP Chain 6 is great for securing everything from bicycles to benches, boats, and BBQs, plus hire machinery, lawnmowers, and sheds. With its reassuringly chunky steel chain links and integral lock, the head makes this one of Oxford's most versatile locks.

The GP Chain 6 has a key replacement service. When you buy your GP Chain 6, simply note down the number which comes attached to the keys on a metal tag. Keep this in a safe place, then in the event that you are unfortunate enough to lose all your keys, it will be possible to get a new key made up for you.

Features:

• Integral lock head rotates 360 degrees.
• Non-scratch chain sleeve.
• Easy portable 6mm round link chain.
• 3 keys with replacement service.
• 5-minute key attack tested.
• 900mm chain - long enough to reach around most posts, gates, and street furniture.

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust and protects axles from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defence, shielding vulnerable joints and preventing leaks. High-performance molybdenum grease reduces heat and friction.

In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Neoprene boots.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.
• Engineered in the USA.
• Manufactured in an ISO facility.Assembled with 3% molybdenum grease.

New replacement starter meets or exceeds the original manufacturer's specifications
100% OEM interchangeable.
Heavy-duty gear reduction starter - more torque
Double sealed bearings - longer life
Heavy-duty clutch drive - longer life

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.