New Arrivals

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Fuel pump strainers act as a first line of defense against fuel system contamination. Strainers filter out common contaminants found in gasoline such as dirt, dust and other particulate matter, as well as gasoline varnish. Quantum fuel pump strainers feature multiple layers of strainer media to filter progressively smaller particle sizes. The expanded surface area provides enhanced filtration, extending the life of the fuel pump.

Restricted fuel flow through a clogged strainer causes the fuel pump to work harder, reducing pump longevity. Strainer clogging is among the top causes of fuel pump failure making it important to replace your strainer regularly - before problems arise. We recommend replacing fuel pump strainers in powersports applications once a year as part of a preventative maintenance plan.

Features:

• Designed with gradient density to meet or exceed OE specifications
• Designed to ensure optimal filtration to prevent fuel system contamination
• Strainer material tested and validated for capacity and efficiency by accredited third party

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s ATVs and UTVs.

• 40% higher tensile strength than conventional CV boo material, suitable for the high joint angles of modern ATVs and UTVs.
• 50% more abrasion-resistant than conventional CV boot material to ensure a long life in harsh off-road environments.
• Rubber compound is tested to -40° F to ensure good performance and long life at low temperatures.
• Lithium-based Molybdenum Grease insures good lubrication for long CV joint life. Easier to install than most OEM and aftermarket boots. Sold each. Does not require the use of a ""Banding Tool"".

Specifications:

• H: 70mm
• SD: 16mm
• LD: 56mm
• Shaft I.D.: 16
• CV Body I.D.: 56
• Length: 70

Kits include:

• Two stainless steel clamps that are designed to be tightened without the use of special tools.

Bolt brand bolts, nuts and washers meet all OEM standards. Designed with precision, each bolt comes in a convenient pack of 10.

All Balls Master Cylinder Rebuild Kit

- Kits contain all of the components to re-seal leaking master cylinders.
- Kits contain copper washers, replacement screws where applicable, cup seals, o-rings and replacement piston.

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Heigh t: 1.625in (41mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Filter Re-Oiling Amount: 0.52oz (15ml)

The best luggage allows you to explore wherever, whenever.

Oxford's range-topping Atlas modular luggage range can take you to the shops or around the globe. Your kit will stay dry and be easy to access, thanks to its waterproof construction.

If you need to expand or contract your carrying capacity, you can quickly add or subtract a bag using its modular luggage system.

When you want to grab everything quickly off the bike and make a dash for it, you can rely on its universal fast fit.

And because it’s built to last, we offer the peace of mind that comes with a lifetime guarantee.

Features:

• Lifetime guarantee.*
• Duraflex® buckles and tri-glide adjustment sliders.
• Aluminium alloy G-hooks.
• YKK® AQUAGUARD® zippers with TPU pullers.
• 3-point adjustable roll-top opening.
• Underseat security strap.
• Detachable shoulder strap for portability.
• Grab handles at the top, bottom, and sides.

Storage:

• PU-coated mesh side pocket for drying kit (T20, T30 only).
• Quick access side pocket (T20, T30 only).
• Quick access top pocket.
• Contrast lining to improve pocket internal visibility.
• 100% waterproof main compartment (fully detachable).

Fabrics:

• Zoned 420D PU-backed polyester ripstop for flexibility and compactness.
• 1000D PU-backed polyester.
• 1mm Hypalon® underside for durability.
• 0.6mm Hypalon® front panel.
• Reflective components.

Included:

• 4 x Connector G-Hook Loop
• 2 x Central Connection Strap
• 2 x Left G-Hook Connection Straps
• 2 x Right G-Hook Connection Straps
• 1 x Security Strap
• 1 x Shoulder Strap
• 1 x Dry Liner
• User information and fitting instructions

* Against faulty materials or manufacture. Excludes reasonable wear and tear. This does not affect your statutory rights.

** Additional dry bags sold separately.

These Trail Tech Kickstands are designed for off-road motorcycles. They are durable, lightweight, and easy to use, keeping your motorcycle upright on any terrain. Made from forged 7075 aircraft-grade aluminium, Trail Tech Kickstands have the strength to endure the harshest conditions.

Specifications:

• Forged 7075 aircraft-grade aluminium.
• Matte black surface.
• Machined cutouts.
• Model-specific brackets.

Reasons to purchase a Trail Tech Kickstand:

• Model-Specific: Trail Tech Kickstands are available in various sizes and styles to fit different makes and models, ensuring compatibility with a wide range of motorcycles. They come equipped with a large foot, which helps prevent the kickstand from sinking into soft soil or sand.
• Easy to Install: Trail Tech Kickstands are engineered for simple installation. Only basic tools and minimal mechanical knowledge are required for quick installation.
• Durable and Reliable: Trail Tech Kickstands are built to last from high-quality materials. They are designed to withstand the rigours of off-road riding.
• Convenient and Versatile: Trail Tech Kickstands make it easy to stop and dismount your bike on any terrain or surface. Whether pausing for a quick break or setting up camp for the night, the kickstand provides stability, allowing you to focus on enjoying your ride.
• Lightweight and Compact: Trail Tech Kickstands won't add unnecessary weight or bulk to your bike.

Disclaimer:

Trail Tech Kickstands are intended for motorcycles with OEM equipment. Altering a bike with aftermarket wheels, suspension, or street tyres can change a motorcycle's ride height and proper lean angle when parked. Please consider this when purchasing.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Oxford Helmet and Visor Cleaner is a unique formula, especially made for cleaning helmets and visors without stripes. Clean with a microfiber cloth. This product leaves no residue or streaks.

Features:

• Easily removes dirt, dead insects and fat.
• Unique composition.
• Simple application.
• Fast drying.
• Safe on all surfaces.

Note: Do not use any chemical products on iridium/mirror finish visors. For cleaning iridium/mirror visors or goggles, we recommend washing with warm water and a soft cloth only.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

Dimensions:

• Width: 19mm
• Length: 50mm
• Height: 37mm
• Wires length: 350mm

Other specifications:

• Number of plugs: 1
• Number of terminals: 3

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

Made with innovative production processes and compounds loaded with oriented fibres to increase the resistance to compression heat and reduce side wear; Dayco CVT belts, ensure high performance and longer life.

The indentation design on the smallest base and, on the back, creates extreme flexibility, giving the belt the possibility to work on reduced pulley diameters to make the most of the variations in ratio.

In addition to the standard line, the “Power Plus” line in aramid fibres is available for special applications and performance.

• Low Segment 50-200 cc: Polyester cord
• Medium segment up to 400 cc: Aramid cord
• High segment from 400 cc: Cogged back

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

MTX solid discs are constructed using one complete segment of Japanese SUS 420 stainless steel, then heat-treated to HRC 36+-2. Lightening and drill hole patterns are as per OEM designs to improve braking performance and reduce the temperature of the disc.

MTX Discs provide amazing braking control for your motorcycle. All MTX discs are designed and manufactured with world-leading, cutting edge technologies:

• Precision CNC machined and laser-cut technology
• Japanese SUS 420 Stainless Steel
• Replacement for Original Equipment
• OEM Design; lightening & drill hole patterns

Specifications:

• O.D: 220mm
• I.D: 100mm
• Minimum Thickness: 4.5mm
• Disc Position: Rear (inc. ABS ring)

Quality chain roller kit from All Balls Racing. High-performance rollers for replacement of OE chain rollers.

Features:

• Universal 34mm and 38mm polyurethane chain rollers have a 98A Durometer hardness for long life.
• Sealed precision bearings with two additional outer seals to prevent water and dirt from contaminating the bearings.
• Mounts to frame boss are made from hi-performance self lubricating nylon.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

Bluetooth communication system co-developed with Cardo, tailored specially for LS2 Helmets. Sound by JBL, live intercom for up to 4 riders, natural voice operation, waterproof design, and many more features. Enjoy communicating with your voice assistant or travel partners.

Features:

• Live sound. Live connection. Experience exceptional audio quality with our all-new auto-reconnecting Bluetooth intercom. For 4 riders at a range of up to 1.2km / 0.75mi.
• Always-on natural voice operation removes the need to press buttons. Just say "Hey Cardo" and give a command—your FREECOM 4X will do the rest.
• Powerful 40mm high-definition speakers engineered by JBL, with a specially tuned music processor and three distinctive audio profiles.
• Waterproof design handles rain, shine, mud, dust, or snow while keeping you connected.
• Stream music directly from your smartphone. Control, share, and experience your favourite tunes on the road.
• FM radio with 6 preset station memory.
• Make calls and control GPS with a touch or via voice.
• Running low on battery? Get 2 hours of talk time with just 20 minutes of charging.
• Talk time: 13 hours.
• Charging time: Up to 2 hours.
• Stay updated with Over-the-Air software updates.
• Equipped with a robust and universal USB Type-C port.

Compatible Helmet Models:

Full Face

• FF805 Thunder GP Aero
• FF805 Thunder / Thunder GP Aero and Thunder FF805 Thunder GP Pro (FIM)
• FF807 Dragon
• FF811 Vector II Carbon
• FF811 Vector II
• FF800 Storm II
• FF808 Stream II
• FF353 Rapid II

Modular

• FF901 Advant X Carbon
• FF901 Advant X
• FF910 Advant II
• FF906 Advant
• FF902 Scope II
• FF908 Strobe II

Open Face

• OF603 Infinity II Carbon
• OF603 Infinity II
• OF618 Verso II
• OF620 Classy
• OF600 Copter II
• OF599 Spitfire II
• OF558 Sphere Lux II
• OF616 Airflow II
• OF558 Sphere II

Off Road

• MX708 Fast II

Adventure

• MX702 Pioneer II

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust and protects axles from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defence, shielding vulnerable joints and preventing leaks. High-performance molybdenum grease reduces heat and friction.

In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Neoprene boots.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.
• Engineered in the USA.
• Manufactured in an ISO facility.Assembled with 3% molybdenum grease.

Wossner is Germany's finest aftermarket forged piston and rod manufacturer and have over 25 years of experience in the high-performance racing industry. Top European racers and FIM World Champions rely on Wossner for only the best pistons, rods and customer service.

Features

• In-house designed and manufactured; all forgings are produced in Wossner's company-owned forging operation
• 4-stroke pistons are made using a double-bridged forging design
• Lightweight pistons with the tightest piston-wall clearances in the industry give you a quieter running engine
• All pistons include piston, ring, wrist pin and pin locks
• Wossner pistons are used by leading Supercross, Arenacross and MX GP teams
• Made in Germany

Specifications

• Piston Size: 77.97mm
• Oversize: 0.01mm

NOTE: Wossner Piston Kits include the Piston, Wrist Pin, Circlips & Rings, Needle Bearings are not included.

All Balls now offers a complete fork bush kit solution. The kit includes the following products:

• 2x slider bushings
• 2x leg bushings
• All copper washers and O-rings, 2 fork seal snap rings.

Quality design and construction of every All Balls piece meets the toughest standards and conditions — from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

A Cylinder Works replacement cylinder is a completely new, not remanufactured, cast aluminium nickel silicon carbide (NSC) electroplated stock bore cylinder that appears just like an OE cylinder.

NSC is a composite of nickel and silicon carbide, providing an excellent wear-resistant surface with oil retention capabilities.

Cylinders are then diamond honed to the exact bore dimension and proper surface finish to ensure the proper ring seal and oil retention.

Features:

• Cylinder looks just like stock.
• Nickel silicon carbide plated for longer life.
• No machine work needed *
• Replacement cylinder for standard bore only.

* Honda CRF250R and CRF250X may require slight case modification. Kit comes with instructions.

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

Premier PH Series Brake Pad - SINTERED STREET BIKE PADS

These long-lasting pads have a HH friction rating and are TUV tested and ECE R90 type approved. Long-lasting and work well in either wet or dry riding. Street Sport "Sintered" High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. The "PH" brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use.

For off-road use select the "PR" range for MX and ATV applications.

Note: One set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.