Oxford

The Oxford Boss and Big Boss alarm have been Independently approved by Thatcham Vehicle Security, SBSC Intygad Produkt, ART 4074 (14mm version).

Features:

• 5-Year life-cycle tested (by Thatcham Research).
• Removable, sealed unit alarm module.
• Water, frost and heat-proof, vibration-resistant.
• Batteries Included (6 x LR44).
• Three keys included.
• Can be used as a disc lock or padlock.
• 100db alarm.
• Padlock only; chain not included.

• 1,150 lumens per pod.
• Power draw 10 Watts per pod.
• Fits bars 22 - 28mm?
• Light casing dimensions 70x52mm?
• Operating voltage: 8 - 32V DC
• Waterproof IPX7.
• Aluminium alloy construction.
• E-Marked.
• Sold as a pair.
• Includes:
  • 2 x Auxiliary Lights
  • 2 x Auxiliary Light adaptors
  • 2 x mounting brackets (for 22-28mm? bars)
  • 1 x wiring harness
  • 1 x On/Off switch

Stronger and much safer than a bungee, Oxford's Atlas Straps are adjustable self-tensioning straps. Their extra strong, flat webbed design is easy to adjust to the desired length and the quick-release B-clip makes them simple to detach. The strap has an elasticated section which keeps the strap under constant tension providing a safer and more secure hold compared to regular solid straps.

With a multitude of uses, your gear will stay safe and secure with Atlas Straps.

Features:

• Extra strong construction.
• Durable elasticated straps.
• Quick-release premium buckle for extra durability.
• Adjustable length.
• Safe and secure.
• Anti-rust, anti-scratch, no sharp bungee hooks.
• Easy to use: attach, clip, tighten.
• Multiple uses: motorcycling, cycling, and outdoor leisure activities.
• Size options: 17mm or 26mm widths and 1.2m or 2.0m lengths.
• Available colourways: black, asphalt, lichen.
• 2 x straps per pack.

Warning:

DO NOT overstretch. Maximum stretch 50%. Always keep out of recoil path. Do not use if strap has any signs of damage. Check for damage before each use.

4 x replacement steel caps for Oxford AnchorForce Ground and Wall Anchor.

Each bike manufacturer uses different connectors for their indicators. This means that when fitting universal aftermarket indicators you need to cut the original connectors off and replace them with bullet fittings.

Not any more! Simply connect the IndyLeads between the original connector and the universal connector. Simple.

2 pack for front OR rear.

Oxford's LidLock Helmet Carabiner if the perfect solution for securing your lid and protecting it from would-be thieves. The LidLock Carabiner enables you to leave your helmet with your motorcycle so you don't have to carry it around while out and about, without fearing it wondering off without your consent.

Features:

• Innovative security for motorcycle helmets and clothing.
• Lightweight aluminium carabiner to attach to the helmet's D-rings.
• Special T-Bar designed for helmets with quick release buckle.
• Coiled cable provided, perfect for securing clothing.
• Innovative outward-opening carabiner mechanism for ease of use.

The CLIQR Pivot Arm Converter can be used with any other CLIQR mount, to offer our most convenient fit with 360 degrees of rotation.

What's included:

• 1 x Pivot arm
• 1 x 3M™ VHB adhesive pad
• 1 x Alcohol wipe

The lock (not provided) is threaded down a waterproof tube that runs through the visor aperture and out of the bottom of the helmet so that you can lock it to the bike.

The easiest lock to use is an armoured cable lock (such as an Oxford Revolver), but you could equally use a chain lock or a regular cable lock.

Features:

• Secure way to leave your helmet with your bike, and keep it protected from the weather.
• Suitable for chains and cable locks.
• Handy hook and loop hanging strap to keep your helmet off the wet ground

REPLACEMENT WIRING LOOM FOR THE OXFORD V9 EVO ATV HOT GRIPS

Replace your standard indicators with these beautifully crafted, miniaturised, high-performance components. A battery of high-intensity Light Emitting Diodes (LEDs) puts basic, low-wattage bulbs in the shade.

As well as their bespoke design and enhanced performance, Oxford Eyeshot LED Indicators boast a much longer life span than conventional bulb-lit indicators, so you can spend more time enjoying your bike and less time maintaining it.

Features

• Unique Oxford design
• Super bright LEDs
• Sealed for life
• Weatherproof design
• 2 x resistors included
• Sold as a pair
• Size: 49mm(L) x 22mm(W) x 20.4mm(H)

The Bumper is a high tensile steel self-coiling cable lock. It has a simple push-to-lock mechanism. Also perfect for securing helmets and accessories.

Features:

• Simple push-to-lock mechanism.
• Perfect for securing helmets and accessories.
• Plastic coated to protect paintwork.
• 2 keys.
• 600mm long, 6mm diameter cable.

Fed up with your trousers falling down? Do belts aggravate you while riding? Then look no further than the Oxford Riggers Braces! A great help in keeping your trousers up while both on and off your bike. With a comfortable design, sturdy design and adjustable length.

Features:

• Anti-snag nylon teeth protects clothing
• Extra strong clips
• Adjustable size - 400-790 mm length
• Quality 35mm wide elastic for comfort
• Material: 80% Elastic, 15% Metal and 5% PU

The Oxford Mint Helmet Care Kit includes everything you need for ultimate helmet cleaning and care. Including a sanitiser that neutralises odours for a clean, fresh feel, helmet cleaner that ensures you can keep your eye on the prize with a crystal clear visor, anti-fog spray for maximum visibility in all conditions and a microfibre cloth for easy application. All complete with a mint-fresh finish and provided in a handy EVA foam pouch for convenient storage on your motorcycle or in your garage.

Features:

• Mint fresh finish.
• Helmet Sanitiser (100ml)
• Anti-fog Spray (50ml)
• Helmet Cleaner (50ml)
• Microfibre Cloth
• Eva foa pouch included.

Note: Do not use any chemical products on iridium/mirror finish visors. For cleaning iridium/mirror visors or goggles, we recommend washing with warm water and a soft cloth only.

A sculpted tankbag to suit modern sports bikes and riders. A must-have piece of equipment that includes a convenient map and SatNav holder.

Features:

• Lifetime guarantee against faulty materials or manufacture.
• Made from lightweight but very tough 420D 'ripstop' construction Nylon.
• All pockets have water-resistant zips with a 'garage' to prevent water ingress.
• All bags 15 litres + come with waterproof (removable) internal liners, with hook and loop fastening.
• All but the smallest of bags (X2 and smaller) come with carry handles.
• 30-liter capacity.
• Map holder.
• Sat Nav pocket for both GPS devices and smartphones. Anti-glare shield.
• Converts into a backpack.
• 2nd map holder in the base.
• Key pocket.
• Electrical outlet (with internal pocket to carry a device).
• Headstock safety strap (must be used).

The Oxford Nomad Accessory Harness is a MOLLE-compatible, universal saddle-mounted base for attaching luggage accessories.

Features:

• PALS webbing front panel for attaching Nomad accessories.
• Durable, weatherproof 600D polyester construction.
• Hypalon® protection tabs.
• D-ring attachment points.
• Adjustable fitting straps to fit directly to motorcycle and luggage.

Replacement grip in sleek black, designed specifically for your Pro Adventure HotGrips®. Need to switch out that grip? This one's got you covered, ensuring your HotGrips® are ready to tackle any adventure that comes your way.

A premium bar end mirror machined from billet aluminium. Easily adjustable and featuring anti-glare convex glass this mirror is designed to fit 22mm / 7/8" handlebars.

Features:

• Can be fitted above or below handlebar.
• Suitable for all motorcycle types.
• Machined from billet aluminium.
• Anti-glare convex glass.
• 12 - 18mm expansion bushes.
• Easily adjustable.
• Universal fitting.
• Optional spacer included.
• To be used in conjunction with original-fit mirrors.

Replacement mirror suitable for most naked bikes.

• Universal Left or Right Side
• M10 x 1.25 right-hand thread

The next evolution of HotGrips® Pro.

In response to customer feedback, Oxford added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves.

Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected setting before dimming - to reduce distraction whilst driving.

Each grip houses its own internal temperature control unit, which independently measures and controls the heat of each grip using built- in thermistors to maintain the desired temperature setting.

Manufactured from silicone, this incredible material increases the grip‘s lifespan by up to 200% without compromising comfort or performance, as well as delivering cable strain improvement and enhanced grip levels.

Features:

• HotGrips® Pro 2.0 Adventure specific
  • Grip guaranteed - hex tread pattern for vibration absorption and durability; knurling tread pattern creates the largest surface area for maximum grip and control; gripper bars for tough terrain where grip is more important for control and stability.
  • Customisable grips - Grip length of 132mm but can be trimmed to 123, 120 or 117mm if required, with open ends allowing bar end weights can be fitted.
• 5 smart heat settings: Red 55°C, Purple 50°C, Green 45°C, White 40°C, Blue 35°C
• The thermistor reacts to temperature changes in the environment and adjusts the heat output accordingly, maintaining the selected temperature setting.
• Integrated controller
  • The built-in controller allows the rider to effortlessly control the temperature of their Hotgrips® Pro without removing their hand from the grip.
  • Multi-coloured LED displays the chosen temperature setting and dims to avoid any distraction.
• Intelligent heat setting memory
  • The intelligent heat setting memory function stores the previous heat setting and defaults to this at power-up, saving time when in regular use.
• Battery saving modes
  • Protects against flat batteries, so if you forget to turn the switch off it will do it for you!
  • HotGrips® Pro offers an additional battery-saving mode for lithium batteries, now common on high-performance motorcycles.
• Waterproof construction
  • Fully waterproof connectors and integrated controller meet IP65 rating to protect your HotGrips® from the elements.
• Grip Features
  • Silicone-formed grips - increase grip lifespan by up to 200% without compromising comfort or performance.
  • Integrated cable strain relief - a more compact cable exit enables grip size to be reduced.
  • Fits 7/8" (22mm) ∅ handlebars.

Each bike manufacturer uses different connectors for their indicators. This means that when fitting universal aftermarket indicators you need to cut the original connectors off and replace them with bullet fittings.

Not any more! Simply connect the IndyLeads between the original connector and the universal connector. Simple.

2 pack for front OR rear.

Replace your standard indicators with these beautifully crafted, miniaturized, high-performance components. Their remarkable 10,000MCD (1000 candle power) or 150,000MCD for the Oxford Nano of lighting energy is optimised by a new 'Honeycomb' lens technology, helping to maximise your visibility when manoeuvring. As well as their bespoke design and enhanced performance, Oxford Eyeshot LED indicators boast a much longer life-span than conventional bulb-lit indicators, so you can spend more time enjoying your bike and less time maintaining it.

Features:

• 1000 candle power.
• Resistors included.
• Super bright LEDs
• Waterproof.
• Ultra reliable: No bulbs to replace.
• Vibration tested and sealed for life.
• Exceed necessary legal standards.

Each bike manufacturer uses different connectors for their indicators. This means that when fitting universal aftermarket indicators you need to cut the original connectors off and replace them with bullet fittings.

Not any more! Simply connect the IndyLeads between the original connector and the universal connector. Simple.

2 pack for front OR rear.

Front lifting forks for use with Zero-G Lite, Zero-G and Paddock Stands.