Oxford

Oxford Hot Grips are the perfect accessory for maintaining warm hands all year round, perfect for using your summer gloves throughout winter or providing some additional warmth in summer. Provided with an easily mounted controller the Hot Grips have 5 different settings to dial in the perfect heat for varying conditions. All Oxford Hot Grips have a battery-saving mode that automatically turns off the grips if you forget to, preventing permanent battery damage.

Features:

• Grip length can be trimmed if required
• Intelligent heat controller included
• 5 heat settings give the perfect operating temperature
• Battery saving mode prevents permanent battery damage
• Sealed for life double bonded rainproof switch that draws under 4A
• The grips have ergonomically engineered surface structures to optimise riding performance
• Thicker rubber in areas of maximum wear
• Rhombus tread pattern for vibration absorption
• 5² block siped tread patterns for high levels of grip and feel
• Diamond tread pattern where maximum grip is required
• Waffle matrix for finger grip
• 123mm, can be trimmed to 114mm

Includes:

• 2x HotGrips
• 1x Intelligent heat controller
• 1x Metal bracket and fittings for mounting the heat controller
• 1x Wiring loom, cable ties and grip glue
• 1x Instruction booklet and warranty form

The XD5 is a compact disc lock ideal for motorcycles and scooters. Its 5mm hardened locking pin and twin spar lock chassis provide twice as much strength and cut resistance, while the unique design allows it to fit where others cannot e.g. Vespa PX.

Features:

• Twin-spar lock chassis for double strength and cut resistance.
• Alloy construction with 5mm hardened locking pin.
• Includes reminder cable.
• Supplied with 3 security keys.

The Oxford Chain Laser uses your motorcycle's sprocket or pulley to project a laser down the centre of the chain or belt, making wheel alignment quick and accurate. Simply adjust the rear wheel until the laser lines up with the front sprocket for perfect alignment.

Proper alignment extends component life, improves handling, and optimises power delivery.

Features:

• Improve performance.
• Increases chain life.
• Prolong sprocket life.

Warning: Do not shine laser directly in eyes or at anything other than its intended use.

Oxford’s huge range of products encompasses everything that makes life on bikes better: from jackets, pants and boots to accessories, hard parts, locks, luggage and much more! Their market-leading products are designed in- house by a team of active enthusiasts and skilled technicians, based at the company’s 100,000 square- foot purpose-built headquarters in Oxfordshire, UK. With the support of the latest CAD technology, a 3D printing suite and a fully equipped test laboratory, Oxford innovate, analyse, test and develop unique products in pursuit of the best experience for two-wheel enthusiasts.

The Oxford Dynamic Level 2 Shoulder / Elbow / Knee Protector (Pair) is an ultra-lightweight and flexible protector which is ideal for use in casually styled motorcycle garments.

• Ultra-lightweight and ultra-flexible protection
• Slim profile, ideal for casually styled Motorcycle Clothing
• Ventilated for cooling airflow to reach the rider
• Adaptive Impact Absorption from multi-impact compliant PU-Foam
• CE Level 2 (EN 1621-1:2012)
• 2 Year Guarantee
• Sold as a pair
• Dimensions: 250mm(L) x 120mm(W) x 9mm(H)

Oxford's Aqua Bags offer the easiest way to get your gear from A to B, safe and dry. They are made from tough PVC tarpaulin, which is welded to form waterproof seams.

The C7 Crash Bar Bag is the latest addition to our extensive Aqua luggage range and is designed for use on adventure bikes that have engine crash bars. The bag has a wipe-clean, matt black exterior which complements bikes of any colour and they look great when used as a pair.

With a 7-litre capacity, each bag is ideal for carrying essential items for day trips and there's a convenient carry handle for when off the motorcycle. Their roll-top design makes packing easy thanks to the bag's wide opening and when rolled up the compression straps ensure no water can enter.

D-rings allow the bag to be securely attached to the motorcycle, or you can strap the bag to your existing luggage using the additional straps included, expanding your carrying capacity.

Features:

• 100% waterproof.
• 7-litre capacity.
• Tough PVC tarpaulin construction.
• Welded seams ensure your belongings stay dry.
• Waterproof roll-top closure with compression straps for maximum stability.
• Ergonomic handle for convenient carrying when off the motorcycle.
• Rigid rear panel prevents deformation.
• D-rings allow the bag to be securely attached to the motorcycle.
• Bag can be secured to existing luggage using straps included.
• Universal fit for almost all motorcycles.
• Dimensions when the bag is closed: 220mm (W) x 300mm (H) x 140mm (D).

IMPORTANT:

Follow the user guidelines. Regularly check that your luggage is securely attached, does not contact any moving or hot parts and does not obscure motorcycle reflectors or lights.

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 900 charges 6 and 12V WET/MF batteries at a maximum charge rate of 800mA (0.8Amps). The intelligent 7-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated – suitable for indoor and outdoor use.
• 7-stage automatic charging: polarity test, analyse, soft start mode, bulk mode, absorption mode, voltage check, and maintain mode (float voltage).
• AH Capacity: 3.5AH - 20AH
• Compatible with 6V and 12V WET/MF batteries.
• Maximum output: 800mA
• LCD display provides clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for improved ventilation around the Oximiser casing.
• Waterproof cable exit with strain relief.
• Winter-grade cable.
• Removable hanger: clip-in and turn to hold securely in place.

The Oxford Indicator Spacers cover holes left by standard-sized indicators in your motorcycle's fairing. Sold as a pair for both the left and right spacers, if requiring spacers for the front and rear you will need two packs. The indicator spacers are designed to ensure the perfect fit for Oxford's diverse range of indicators when replacing your broken, damaged or malfunctioning OEM indicators.

The Magnum is an ultra-strong U-lock. It boasts a high security, independently approved 16mm shackle lock with a hardened steel construction and has undergone rigorous testing, achieving Sold Secure GOLD, ART 4*, SBSC and FG certification.

The Magnum has a key replacement service. When you buy your Magnum, simply note down the number which comes attached to the keys on a metal tag. Keep this in a safe place, then in the event that you are unfortunate enough to lose all your keys, it will be possible to get a new key made up for you.

Features:

• Sold Secure Powered Cycle (Motorcycle) GOLD.
• 16mm shackle.
• Ultra-strong double locking mechanism.
• High-tech pick-resistant locking system.
• Saw, bolt cropper and drill resistant.
• 2 x keys
• Lock head dust cover.
• Dual use product.
• Comes with carry bracket for cycle use.
• 5-minute attack tested.
• 1.2m cable included (Duo model only). Use the U-lock to "lock" the bike to a fixed object (e.g. Oxford anchor, fence, lamp post, etc.) to prevent it from being ridden or pushed away. The cable can be used to secure the component parts such as wheels.

Short stem Rectangle Mini LED replacement indicators.

Features

• 9 super-bright LEDs
• Compact and stylish design
• Weatherproof
• Sealed-for-life for greater longevity
• Includes 2 resistors to control flash rate on most motorbikes
• Specification: 12V, 1W
• Instructions included
• E-marked for front and rear use
• M8 bolt - thread pitch 1.25mm
• Size: 74mm (L) x38mm (W) x 33mm (H)

These HotGrips™ are universal, but have been designed to be compatible with motorcycles which have smaller batteries and less powerful charging systems. Therefore, they draw less current than other HotGrips™ such as those in the Oxford Premium and Advanced ranges.

Soft, ultra-grippy rubber provides comfort & feedback and if required, the grips can be cut down to size.

Key features:

• Weather resistant heat controller
• 2 way switch with High/Low function
• Draws under 3.2A
• Rainproof, double bonded, sealed for life switch
• Fits 22mm handlebars
• Moulded wiring arrangement is both durable and discreet
• Unique Oxford tread design
• Small size: 52 x 30 x 24mm (W x D x H)

Includes:-

• 2 x HotGrips™
• 1 x heat controller
• 1 x bracket and fittings for mounting the heat controller
• 1 x wiring loom, cable ties and grip glue
• 1 x instruction booklet and warranty form

• 260g each.
• Cast carbon steel construction.
• Stylish gloss black design.
• Twin expanding TPR bungs for double damping and perfect balance.
• Fit handlebars from 13mm-18mm internal diameter.

The CLIQR action camera mounts screws onto your action camera and allows you to mount it on your chosen CLIQR system just like any other device. Perfect for motorcycle, bicycle, and other leisure activities.

What's included:

• 2 x Action Camera Mounts

Front wheel removal tool.

Features:

• 6 key sizes
• CNC machined C45 Steel

Applications:

• 12mm - Front axle for KTM, etc.
• 14mm - Yamaha XT66OZ, Kawasaki ER-6N, Versys 650
• 17mm - Triumph
• 19mm - Yamaha
• 22mm - Kawasaki
• 24mm - Suzuki + Honda

The Halo LED number plate light.

Key Features
• 3 LEDs in a matt back finish case
• E-marked, suitable for road use
• Universal fit, easy to install
• Waterproof design with an IP rating of X7
• Specification: 12V, 0.45W
• M8 bolt - thread pitch 1.25

Size: 24mm (H) x 50mm (W) x 15mm (D)

Bobbins make fitting a rear paddock stand to your bike much easier and quicker. Frame Forks must be fitted to the rear paddock stand before bobbins can be used. Makes fitting a rear paddock stand to your bike much easier and quicker.

Features:

• Does not mark the bike's swing arm.
• The majority of bikes have pre-threaded holes in their swing arms to fit bobbins.
• Some bikes have uneven swing arms, making the use of bobbins the only way to safely fit a rear paddock stand.
• Size: M6 x 1.0 thread

Note: Consult your bike manufacturer for the bolt and thread size required for your bike.

The best luggage allows you to explore wherever, whenever.

Oxford expanded its range-topping Atlas modular luggage range with new bolt-ons and wearables designed to take you to the shops or around the globe.

The Atlas L-2 Leg Pack has a waterproof 1.5-litre capacity main pocket and a 0.5-litre capacity water-resistant easy access front pocket.

Features:

• 2-litre total capacity.
• Weight: 420g - 15oz
• Adjustable waist and thigh straps.
• Highly UV resistant materials.
• Level 5 IP rated water-resistant.
• Dimensions: 16cm(w) x 23cm(h) x 8.5cm(d)

ZERO-G paddock stands cater for all kinds of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands.

All of our paddock stands are engineered using the latest CAD technology and 3D modeling techniques. By being scientifically designed to minimise the required effort to move a given load, our new ZERO-G range of paddock stands literally takes the weight off. Even better, they are able to do this without weighing too much themselves, making them even easier to use and live with.

The ZERO-G headstock paddock stand frees up space to access and service suspension forks and allows easy removal of the front wheel. Constructed from durable steel, with heavy-duty fasteners and a base with large wheels for increased stability this is a dream piece of workshop equipment.

RiDE Magazine rated the Zero-G BEST BUY in their market review. They praised the clear instructions, finish, and large wheels and declared it was the easiest stand to lift a bike with on the test.

Key Features
• Durable steel construction
• Oval tubing to prevent rotation
• Torsional supports for increased stability
• 5 lifting pins included 13-18mm
• Rubber sleeve to protect headstock
• Robot welded for high build quality and consistency
• Heavy-duty fasteners
• Large wheels for increased stability
• Max load: 250kg
• Stand weight: 9kg

A quick and easy single-handed method to bleed your brake system.

Features:

• Universal fitment with securing clips included clear tubing to see air bubbles leaving the master cylinder.
• One-way alloy valve prevents air being drawn into the system

Oxford's Aqua Bags are one of the easiest ways to get your gear from A to B, safe and dry. They are made from tough PVC tarpaulin, which is welded to form waterproof seams.

Features:

• 20-litre capacity waterproof backpack.
• Waterproof roll-top closure.
• Phyzibility - 360-degree reflective detailing.
• 3 x Air Mesh padded panels for greater air circulation and comfort.
• Water-resistant zipped external pocket.
• Wipe-clean, waterproof construction with welded seams.
• Reflective webbing loop for tail light attachment.
• Adjustable chest strap.
• Longer length straps for improved comfort when riding.
• Carry handle.

Approx size when filled:

• 50cm (H) x 20cm (W) x 23cm (D)

Oxford's Toolstash is a compact tool roll that comprises 34 elasticated tool locations. It is constructed using tough 600D, PVC-backed polyester.

Features:

• 3-layer padded construction
• Reinforced window pocket for visible extras
• Steel eyelets to facilitate hanging in a workshop
• Hook-and-loop fastening compression straps with bar-tack reinforcements
• Dimensions:
  • 150 X 285mm (Closed)
  • 575 X 285mm (Open)

Please note, tools are not included.

The Oxford Discus Chain 10 features a 9.5mm square link heavy duty chain and combination padlock. The chain comes equipped with a sleeve which helps protect your paintwork and the padlock has a stainless steel, rust resistant body, dead lock mechanism and 10,000 potential combinations.

Features:

• Stainless steel, rust-resistant body
• Deadlock mechanism
• Bolt cropper resistant
• 10,000 possible combinations
• 9.5mm 1.5M square chain link
• Protective sleeve

The Oxford Airtrack pump is a steel floorpump.

Features:

• Twin head fits Presta and Schrader valves.
• 160PSI Max Pressure.
• Super tough steel barrel.
• Includes adaptors for ball and inflatables.
• Ergonomic handle and footplate.
• Long air pipe for greater reach.

Specially formulated with selected oils, PTFE and fewer solvents to generate a high film-forming capability; this works to produce a stronger and more robust film, reducing 'fling' and improving chain protection in dry and dusty conditions. PTFE content fills the gaps between moving parts to reduce dirt ingress.

Features:

• Ideal for dry and dusty conditions.
• Special formulation with PTFE helps prevent dirt and grime adherence.
• Great for chains, sprockets, and O, X, Z rings.

Heated motorcycle seat from Oxford.

Features:

• Three heat levels displayed through the RGB LED Power button: Red = 100%, Blue = 75%. Green = 50%.
• Heat output adjustable on the go.
• 12V power input needed, wire to switched live only Easy to install using the Hook
  and Loop System.
• 12W draw - at 12V input on 100% (Red) output.
• Added grip to the top and bottom material to maintain control when using the heated
  seat in cold or wet weather.
• Weatherproof electronics.