PHONE ACCESSORIES

The RAM-B-346 base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.

Features:

• Fits over your motorcycle's existing brake/clutch reservoir cover; includes set of M4 x 35, M4 x 30, and M4 x 20 screws
• Included B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x4 M4 x 20mm Machine Screws
• x4 M4 x 30mm Machine Screws
• x4 M4 x 35mm Machine Screws
• x4 M4 Flat Washers
• x4 .188" Nylon Spacers

The RAM-B-252 marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252 is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).

Features:

• Features an 11mm hole designed to attach to the mirror frame of motorcycles
• Included B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

Assembly kit for Ram Mirrors. Without ball.

CLIQR range is manufactured from glass-filled nylon due to its superior mechanical properties, light weight and durability.

CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position for you. Simply stick the CLIQR device adaptor onto the back of your device and CLIQR it into the mount in the orientation that suits.

The CLIQR Suction Mount can be applied to any non-porous surface. The integrated pivot arm allows for 360-degree rotation for the ideal viewing angle.

Key Features
• Universal adaptor with VHB 3M™ tape
• Shared base mount
• Attach to car windscreen or any non-porous surface
• Quick and easy to detach
• Convenient viewing at a glance
• Perfect for navigating on the move

What's included
• 1 x Suction mount
• 1 x Pivot arm
• 2 x Device adaptor
• 1 x Alcohol wipe

The RAM^® Magnetic Power Plate^™ III is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets, a composite cradle, and one adhesive metal plate. To mount your device to the magnet, you will need to attach the metal plate to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm metal plate with adhesive back.

Features:

• Designed to hold a range of devices including radar detectors; rectangular metal plate attaches to the back of your device
• Magnetic plate features adhesive, two powerful magnets, and cradle
• Made of high-strength composites for durability and reliability in the most demanding environments

Specifications:

• HOLE PATTERN: 4-Hole AMPS: 1.181" (29.9mm) x 1.496" (37.9mm)
• PLATE SIZE: 3.13" (79.5mm) x 4" (101.6mm)

Hardware Included:

• x1 50mm x 38mm Steel Adhesive Plate
• x2 Rare Earth Magnets
• x4 #6-32 x 1/2" Machine Screws
• x4 #6-32 Nylock Nuts

The RAM-HOL-UN7-400U consists of the small Tough-Claw^™ base and universal X-Grip^® cradle. The X-Grip^® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip^® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The X-Grip^® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Features:

• Small version of the RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface
• Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use
• Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments

Specifications:

• HOLDER DIMENSIONS:Width Range: 1.75" (44.4mm) - 3.25"(82.5mm), Depth Range: 0.875" (22.2mm)max
• CLAMP RANGE: 0.625" (15.8mm) - 1.14" (28.9mm) diameter
• BALL SIZE: RAM Snap-Link (3/4")

Hardware Included:

• x1 Optional Tether
• x1 Glue Tube for Rubber Caps

The RAM Magnetic Power Plate^™ III U-Bolt Handlebar Mount is designed to hold radar detectors securely while on the road. The magnetic plate includes two powerful rare earth magnets, composite cradle and one adhesive steel plate. To mount your device to the magnet, simply adhere the steel plate to the back of you device and lock up against the holder. This holder includes a quick-release function, where the device conventiely can be removed by twisting out of the holder in one easy motion. The Handlebar U-Bolt Mount is made up of three components total: A U-bolt ball base that can accomodate any handlebar from .5" to 1.25" diameter, a double socket arm, and a round ball plate that connects to the bottom of the RAM Power Plate III. The double ball and socket design provides infinite adjustability, so you can articulate your radar detector to the perfect viewing and operating angle. The rubber ball components provide shock and vibration damping, making this mount suitable for any rugged environment.

Specifications:

• CLAMP RANGE: 0.5" (12.7mm) - 1.25" (31.7mm) diameter
• SOCKET-TO-SOCKET LENGTH: 3" (76.2mm)
• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x1 50mm x 38mm Steel Adhesive Plate
• x1 1/4"-20 U-Bolt for 0.5" - 1" Rails
• x1 1/4"-20 U-Bolt for 1" - 1.25" Rails
• x2 1/4"-20 Nylock Nuts
• x2 Rubber Caps
• x1 U-Bolt Spacer

The RAM® Tough-Claw is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The large version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from 1" to 2.2" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bicycles and motorcycles, or even on kayak rails and roll bars, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.

Features:

• Large version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from 1" to 2.2" in outer diameter; rubber pads provide stable gripping and protection of mounting surface
• Ideal mounting base for phones, tablets, cameras, rod holders, and much more; includes 1" B size rubber ball for attachment to RAM® double socket arms
• Made of high-strength, glass-filled nylon with corrosion-resistant, stainless steel hardware for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

Product Dimensions

• Overall Height: 5.94"
• Overall Width: 2.25"

Clamp Range: 1" - 2.2" Diameter

Ball Size: B Size (1")

Weight Capacity

• Standard Use: 2 Lbs
• Heavy-duty Use: 1 Lb
• Materials: High Strength Composite

Packaging Type: Poly Bag

Weight: 1.05 Lb

The CLIQR Universal Handlebar/Stem Mount is a multi-use mount that can be fitted in hard-to-reach areas, as well as on multiple diameter tubes. It offers a low-profile mounting system using cable ties and a 3M pad.

What's included:

• 2x Cable Ties
• 2x Device Adaptors
• 1x Silicone Pad
• 1x 3M Security Pad
• 1 x Alcohol wipe

The CLIQR Pivot Arm Converter can be used with any other CLIQR mount, to offer our most convenient fit with 360 degrees of rotation.

What's included:

• 1 x Pivot arm
• 1 x 3M™ VHB adhesive pad
• 1 x Alcohol wipe

The RAM® X-Grip® Phone Mount with RAM® Vibe-Safe™ & Small RAM® Tough-Claw™ (RAM-HOL-UN7-462-400) is a combination of the RAM® X-Grip® Phone Mount with Low-Profile Small RAM® Tough-Claw™ and the RAM® Vibe-Safe™—our vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies.

The RAM® X-Grip® can rotate between portrait and landscape by loosening the centre screw. With the RAM® Tough-Claw™ base, easily attach the RAM® X-Grip® with RAM® Vibe-Safe™ on round, square, and odd-shaped rails and bars ranging from 0.625" to 1.14" in outer diameter. This product comes with an optional device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that will fit the dimensions listed below; it is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Features:

• RAM® Vibe-Safe™ dampens a wide range of vibration frequencies
• Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments
• Unique structure and thoughtfully designed with all industries in mind
• Backed by a lifetime warranty

HARDWARE INCLUDED

• (1) Optional Tether
• (1) Glue Tube for Rubber Caps

HOLDER DIMENSIONS

• Width Range: 1.875" - 3.25"
• Depth Range: 0.875" max

CLAMP RANGE

• 0.625" - 1.14" diameter

MATERIALS

• High strength composite
• Stainless steel

PACKAGING TYPE

• Retail Bag

WEIGHT

• 0.74 lb

ADDITIONAL INFORMATION A reduction in vibration does not guarantee full protection of the device. External immeasurable factors may cause damage to phones, cameras, and other devices while mounted in the RAM® Vibe-Safe™. National Products, Inc does not assume responsibility or liability for any such personal injury, death, or property damage. RAM® mounts lifetime warranty is limited to RAM® mounts and components. The warranty does not include any device mounted or attached to a RAM® mount, such as a phone, GPS, camera, computer, or other device.

Combining the bestselling 22mm handlebar mount with a cast aluminium twin- spar pivoting arm, the CLIQR Handlebar Pivot Mount offers our most convenient fit with 360 degrees of rotation.

What's included:

• 1 x Handlebar mount
• 1 x Pivot arm
• 2 x Device adaptors
• 1 x Alcohol wipe

Mount your phone to your handlebars and keep it charged while you’re on the move.

Attach the mount to a round handlebar with a diameter of 22 to 32mm, connect the mount to your battery, red to positive (+), black to negative (-), and you have power. The mount has a 5V/2.5A USB charge port, an ON/OFF switch and comes with a free USB cable suitable for charging Apple and some Samsung phones.

Pair your phone to your bike's coms and you’ll have “turn by turn” navigation and be listening to your favourite tunes as you tear down the road!

Certified EN 60 529/IP66 (rating for Protection against dust and high-pressure water jets)

Note: Before you secure the holder, please check it isn't going to come into contact with anything like a tank bag when on full lock. This phone holder is not compatible with the otterbox cases.

This phone holder and charger will charge both wirelessly and/or through a USB-C port. It will securely hold a phone up to 90mm wide and comes with all wiring necessary to connect to your motorcycle battery.

Features:

• Comes with 25mm handlebar ball mount with a 60mm clamp arm that can be securely locked in place.
• Bar clamp will open to 33mm, goes with 12, 22, 25 and 28mm clamp inserts.
• Has a built-in anti-vibration damper.
• IP65 rated.
• Simple one-handed on and off phone mounting, with a securing latch.

The RAM Vibe-Safe Adapter for 2-Hole Holders (RAP-462NPT) is a vibration-damping accessory designed to protect electronic devices from a wide range of vibration frequencies. The RAM Vibe-Safe is based on an NPT connection point and boasts the versatility to rotate between portrait and landscape while keeping your device secure in rugged environments.

This adapter is compatible with most 2-Hole RAM Holders, including the RAM Quick-Grip, RAM Tough-Charge, RAM Quick-Charge, and RAM Form-Fit Holders. The RAM Vibe-Safe is only compatible with the metal diamond ball adapter (RAM-B-238U).

Features:

• RAM Vibe-Safe dampens a wide range of vibration frequencies
• NPT thread connection allows for rotation between portrait and landscape while remaining secure
• Compatible with RAM holders with 2-Hole AMPS hole pattern, and the metal diamond ball adapter (RAM-B-238U) for any B-size ball and socket mount
• Unique structure and thoughtfully designed with all industries in mind
• Backed by a lifetime warranty

HARDWARE INCLUDED

• (2) #10-32 x 7/16" Machine Screws
• (2) #8-32 x 1/2" Machine Screws
• (2) #8-32 Nylock Nuts

PRODUCT DIMENSIONS

• Overall Length: 3.38"
• Overall Width: 3"
• Overall Thickness: 1.36"

HOLE PATTERN

• 2-Hole AMPS: 1.912"

MATERIALS

• High strength composite

PACKAGING TYPE

• Retail Bag

WEIGHT

• 0.3 lb

ADDITIONAL INFORMATION

• A reduction in vibration does not guarantee full protection of the device. External immeasurable factors may cause damage to phones, cameras, and other devices while mounted in the RAM Vibe-Safe. National Products, Inc does not assume responsibility or liability for any such personal injury, death, or property damage. RAM mounts lifetime warranty is limited to RAM mounts and components. The warranty does not include any device mounted or attached to a RAM mount, such as a phone, GPS, camera, computer, or other device.

The CLIQR USB Converter can seamlessly integrate with any CLIQR mount, allowing you to charge your device on the move.

What's included:

• 1x USB Charger
• 1x USB Converter
• 1x M3 x 8mm Bolt
• 1x M3 x 22mm Bolt

The RAP-S-KNOB3U consists of a 1/4"-20 female threaded security knob and key knob. The RAP-S-KNOB3U replaces all knobs on 1" diameter B size arms and mounts. The RAP-S-KNOB3U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB3U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-KNOB3U is the perfect accessory for keeping your mounted electronic device safe from theft and tampering.

Features:

• Keep your devices and mounting system safe from theft and tampering with this 1/4"-20 female threaded security knob
• Replaces standard knobs on 1" B size RAM® double socket arms
• Made of high-strength composites and steel for durability and reliability in the most demanding environments

Hardware Included:

• x1 RAM Pin-Lock Security Key

The CLIQR Stem Cap Mount offers the most discrete and central mounting position for biking adventures. Replacing the existing bikes Stem Cap with the lightweight and durable CLIQR mount.

What's included:

• 1x Mount
• 1x M6 Bolt
• 1x Stem Cap
• 2x Devices adaptors
• 1 x Alcohol wipe

The CLIQR Cable Tie Mount is a multi-use system that can be fitted in hard- to-reach areas, as well as on multiple diameter tubes. It offers a low profile mounting system using cable ties and a 3M pad.

CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position for you. Simply stick the CLIQR Device Adaptor onto the back of your device and CLIQR it into the mount in the orientation that suits you.

Features:

• Tough but lightweight mounting system provides an optimal viewing position for your device
• Quick and easy to install, with all fittings included.
• Compatible with most phones, phone cases, GPS devices and compact action cameras.
• Device adaptor uses top-quality 3M adhesive.
• Dual locking mechanism with a failsafe system.
• Device can rotate between landscape and portrait views.

What's included:

• 2x Cable Ties
• 2x Device Adaptors
• 1x Silicone Pad
• 1x 3M Security Pad