Whites

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

Whites 12v Rocker ON & OFF Switch

Features:

• Durable Waterproof Design
• Flush mounting (30mm X 22mm rectangular hole required)
• Backlit for any weather condition

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Includes all gaskets and o-rings necessary to complete a crank (bottom end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set is your one-stop shop for engine rebuilds.

• Designed for OEM replacement
• Made from high-quality materials
• Meet or exceed OEM specifications
• Competitive pricing

When it comes to your hands, comfort and protection are non-negotiable. Made with absorbent microfibre, Whites Inner Gloves is designed to enhance your experience whether you're in the ring, on the field, or at the gym.

Comes in Light and Heavy variants.

• Enhanced protection
• Ultimate comfort
• Stay dry and fresh
• Easy to wear.

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.

Spare part for Lift Table.

Built to outlast and outperform OEM seals, the Whites Oil Seals are a high-quality and cost-effective alternative to OEM replacement parts. Constructed with a dual-lip design that reduces friction and ensures better sealing, improving the life of the seal. Manufactured to strict factory specifications.

Whites Fork Seals are high-quality OEM replacements
Dual-lip design reduces friction and ensures better sealing
Manufactured to factory specifications
Size: 35 x 49 x 6

Whites Oil Filters are designed to trap harmful contaminants while still allowing a high oil flow rate.

Features:

• Designed for great filtration.
• Oil filter design provides for a high rate of oil flow.
• Filters available for almost all makes and models.

Put the spark back in your ride with a Whites Electrical Coil. Manufactured as a direct OEM replacement while meeting or exceeding OEM specifications, it will mount with ease and outperform that worn-out coil. Whites Ignition Coils are the perfect cost-effective alternative to OEM ignition coils, with a vast range of applications available.

Features:

• Cost-effective OEM alternative.
• OEM replacement.
• Manufactured to meet or exceed OEM specifications.
• Diverse applications.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB013
  • Outer: WPAXCVB013
• Please confirm suitability for your year, make, and model prior to purchase.

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB013
  • Outer: WPAXCVB013
• Please confirm suitability for your year, make, and model prior to purchase.

EXHAUST MUFFLER CONNECTOR 35x41x30.9mm

NOTE: RIGHT RADIATOR ONLY, FOR LEFT SEE WPRAD150L FOR PAIR SEE WPRAD150P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

A standard bulb from Whites' comprehensive range of electrical bulbs.

Includes:

• 6v
• 12v
• Instrument
• Capless
• Flasher
• Stop-tail
• Pre-focus
• Halogen headlamp.
  
  

Trusted by riders and dealers in the automotive market, the Whites CV Axle proves its durability against the industry's top manufacturers. With oversized outer joints accommodating up to a 45° swing angle, it enhances suspension travel and robustness. Through the latest CNC manufacturing technologies, the inner joints allow up to 45° of movement. Enhanced by high-strength TPE boots, OTK clamps, and moly grease, it delivers optimal performance in harsh conditions, significantly extending axle lifespan.

• Up to 45° swing angle.
• Up to 45° travel on inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Please refer to our online fitment guide for regular additions to the range and specific fit for your model.

Trusted by riders and dealers in the automotive market, the Whites CV Axle proves its durability against the industry's top manufacturers. With oversized outer joints accommodating up to a 45° swing angle, it enhances suspension travel and robustness. Through the latest CNC manufacturing technologies, the inner joints allow up to 45° of movement. Enhanced by high-strength TPE boots, OTK clamps, and moly grease, it delivers optimal performance in harsh conditions, significantly extending axle lifespan.

• Up to 45° swing angle.
• Up to 45° travel on inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Please refer to our online fitment guide for regular additions to the range and specific fit for your model.

Featuring a one way valve that allows air into the tank which provides efficient fuel flow through the carburettor and engine, while preventing fuel from leaking out the hose in a fall. With a shortened pipe that makes for easy operation when removing the fuel cap. Constructed from T6-6061 aluminium the breather is built to last, finished with a custom anodised finish available in Black, Silver, Gold, Green, Red, Blue and Orange.

• One way valve prevents fuel leaking in a fall
• Keeps tank ventilated for maximum fuel flow through the engine
• Constructed from T6-6061 aluminium
• Available in 7 custom anodised colours

The Whites 1-Piece Finned Top Bar Clamp is the perfect addition to your cafe racer or bobber project or an upgrade for your existing ride. Constructed from chrome plated steel for excellent strength, durability and corrosion resistance while providing a show chrome shine. The clamp is manufactured with countersunk bolt holes to improve the look of your handlebar set up and is compatible with 1" handlebars.

Features:

• Compatible with 1" handlebars.
• Chrome plated steel.
• Countersunk bolt holes.
• Utilizes existing mounting hardware.
• Custom finned design.
• Bolt Spacing:
  • Front Width: 69mm
  • Back Width: 107mm
  • Front to Back: 40mm

The Whites Shock Reservoir Cap Removal Tool threads onto the Schrader Valve located on the reservoir cap helping you to install/remove it easily.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Having the ability to turn corners is pretty important, so tie rod ends play a large role in any vehicle's safety. Whites Tie Rod End Kits are the perfect replacement for your old and worn-out OE parts, or an excellent upgrade to your steering system.

To ensure a great fit we recommend using our fitments search, or referencing the fitments tab above.

• Steel and aluminium construction strengthened in critical areas for durability
• Affordable OEM replacement
• Mounts to your OEM Tie Rods

NOTE: RIGHT RADIATOR ONLY, FOR LEFT SEE WPRAD059L FOR PAIR SEE WPRAD059P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB001
  • Outer: WPAXCVB002
• Please confirm suitability for your year, make, and model prior to purchase.

Featuring a 180-degree lever pivot action, the Whites Folding Clutch Levers are a must-have on any dirt bike.

In the unfortunate event of a crash. the lever simply turns back on itself and out of harm's way, preventing breakage of your lever. When you're back up, a high-tension spring returns the lever to its original position and you're ready to rip.

With a sleek silver finish or anodized black, red and blue (model-dependent) that gives an awesome factory look.

Specifications:

• Durable forged and anodized lever arm.
• Lever folds outward to prevent breakage in the event of a crash.
• Lever adapter is ultraprecise CNC machined out of high-grade aluminium for a super-light design.
• High-tension spring keeps the lever in place while riding.
• Constructed with brass bushing for maximum performance with smooth operation.
• Function with style.

High-quality linkage kit to meet EOM requirements.