Work Shop

From Apollo 13 and the Lunar Rover to helicopter blades in Vietnam (seriously google it!) is there anything that Duct Tape can't fix? Probably not, and Whites Duct Tape is no different. Supplied in a standard 48mm width and a 30-metre roll you will always find a use for it. Constructed from woven fabrics and powdered aluminium mixed into the LDPE provide the Duct Tape it's legendary strength and durability. So, if it can repair spacecraft and helicopters it can certainly be used as a quick fix for your motorcycle, grab yourself a roll, or three!

Woven fabric provides excellent strength
Powdered aluminium adds durability to the LDPE
Can repair spacecraft, helicopters and motorcycles
Width: 48mm
Length: 30m

Pin for the Whites Bike Stand.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat-treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat-treated for strength and durability
Durable hot black oxide finish

Thread Size: M26 x 1.0
Thread Direction: Right Hand
Type: Male (External Thread)

Replacement universal mounting plate for All Balls winches.

• 3.0 x 4.875" Bolt Pattern
• 4-Bolts
• Universal Mounting Plate

These Trail Tech Kickstands are designed for off-road motorcycles. They are durable, lightweight, and easy to use, keeping your motorcycle upright on any terrain. Made from forged 7075 aircraft-grade aluminium, Trail Tech Kickstands have the strength to endure the harshest conditions.

Specifications:

• Forged 7075 aircraft-grade aluminium.
• Matte black surface.
• Machined cutouts.
• Model-specific brackets.

Reasons to purchase a Trail Tech Kickstand:

• Model-Specific: Trail Tech Kickstands are available in various sizes and styles to fit different makes and models, ensuring compatibility with a wide range of motorcycles. They come equipped with a large foot, which helps prevent the kickstand from sinking into soft soil or sand.
• Easy to Install: Trail Tech Kickstands are engineered for simple installation. Only basic tools and minimal mechanical knowledge are required for quick installation.
• Durable and Reliable: Trail Tech Kickstands are built to last from high-quality materials. They are designed to withstand the rigours of off-road riding.
• Convenient and Versatile: Trail Tech Kickstands make it easy to stop and dismount your bike on any terrain or surface. Whether pausing for a quick break or setting up camp for the night, the kickstand provides stability, allowing you to focus on enjoying your ride.
• Lightweight and Compact: Trail Tech Kickstands won't add unnecessary weight or bulk to your bike.

Disclaimer:

Trail Tech Kickstands are intended for motorcycles with OEM equipment. Altering a bike with aftermarket wheels, suspension, or street tyres can change a motorcycle's ride height and proper lean angle when parked. Please consider this when purchasing.

Make your maintenance and repair jobs quicker and easier with the Whites T-Handle Sockets. Perfect for those quick and easy to access nuts and bolts. No more slow operation with conventional spanners or having to constantly swap sockets, you'll never want to return to those old spanners. The perfect tool to have in the workshop, garage or at the track.

Constructed from high-quality chrome vanadium steel
Faster and easier than spanners
Great in the workshop, garage or at the track
Size: 12mm

An ideal tool for removing those soft alloy fork tube top caps without damage, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

For removing front fork cap
Made of durable steel
Prevents damage to aluminium fork caps
Size: 17mm

Oxford's Oil Filter Wrench Strap is ideal for removing oil filters that have a diameter between 50-120mm?. By wrapping the strap around the oil filter and creating a tight fit, the torque from the applied pressure on the wrench helps to gradually loosen the oil filter.

Features:

• Fits oil filters 50-120mm.
• One-handed operation.
• Durable steel construction.
• Reinforced rubber strap.
• Non-slip and fully adjustable strap.
• Corrosion resistant handle.

A workshop essential designed to absorb minor oil spillages in the garage and to keep a tidy and safe workshop.
The 100 X 200cm mat has a 5mm deep pile carpet which is made from a strong and durable 100% nylon pile carpet, thus meeting the requirements of FIM and being great for garage or track use.

Key Features
• Oil and water resistant yet easy to clean when spillages occur
• Made from a strong and durable 100% nylon pile carpet
• Takes the weight of a motorcycle on a stand
• Comfortable to kneel on whilst working on your motorcycle
• The TPR backing prevents oil and fluid contaminating the immediate environment
• The sewn bound edge retains spills and is track compliant

Capable of holding up to 680ml of fluid and with 4 different percentage markings along with a general millilitre marking for gearbox/engine oil changes. The Whites Oil mixture jug has all your two-stroke percentage mixing requirements sorted, with a removable bottom for steady pouring in use and convenient storage in your toolbox. While the rubber cap prevents oil from leaking when not in use or when you want to pre-measure your oil for the next fuel up.

4 different percentage mixtures
Can hold up to 680ml
All-purpose ml marking included
Percentage marked
Rubber cap
Removable base

Percentage Markings:
2% (50:1) in 2L increments
3% (33:1) in 2L increments
5% (20:1) in 2L increments
8% (16:1) in 1L increments
0-680ml measuring gauge in 5ml increments

Rrovides stable, secure support for your paddock stand while protecting your swingarm from scratches.

The Whites Clutch Lock Nut Tool is a special tool designed to loosen and fasten the lock nut when removing or installing the clutch. The two tool in one design has a 25mm on one end and 30mm on the other, both with a 1/2" square socket drive on the inner for use with a torque wrench for accurate installation. Constructed from heat treated steel for durability and a black oxide finish for corrosion resistance.

25mm and 30mm ends
1/2" square socket drive on each end
Heat treated steel construction
Black oxide finish

Tyre pressure is an integral component of your tyres obtaining optimum traction. When riding off-road ideally you want to run your tyres at the lowest pressure possible without causing a flat tyre, road riders refer to your tyres recommended pressure, the only way to accurately measure this is with a tyre pressure gauge.

Pencil shaped for portability can be stowed in your backpack for use on the trails.

Features:

• Portable and easy to read.
• Simple to use.
• Shock-resistant.
• Air pressure release button.
• 0-20 psi reading

The Whites Bearing Retainer Tool is designed to remove and install the rear wheel seal/bearing retainer ring while preventing damage to the retainer ring.

The six-pin design ensures a firm grip of the retainer ring, 47mm diameter for 47mm retainer rings. Constructed with a 22mm external hex head and 3/8" square socket drive for use with sockets, spanners and torque wrenches. Manufactured from hardened steel for strength and durability.

Features:

• 47mm diameter six-pin design.
• 22mm external hex head.
• 3/8" square socket drive.
• Durable steel construction.
• Prevents damaging the retainer ring.

Everything you need for basic KTM motorcycle maintenance in one compact kit. Includes essential wrenches, sockets, bits, pliers, spanners, Torx keys, screwdriver, cable ties, safety wire, and a tyre pressure gauge.

Kit includes:

• Crank Wrench (1pc) – 32mm / 27mm / 22mm / 17mm
• Combo Pliers – 6"
• KTM T-Handle Wrench
• Bit and Socket Set (10pcs)
  • Bits: T45, T40, T30, T25, H5
  • Adapter
  • Sockets: 6mm, 7mm, 8mm, 10mm
• Torx Key Set (9pcs)
• Socket Set (3pcs) – 6mm, 8mm, 10mm
• 6-in-1 Reversible Screwdriver
• Spanner Set (4pcs) – 8mm, 10mm, 12mm, 13mm
• Cable ties (10pcs)
• Safety lock wire – 2m
• Tyre pressure gauge

The Whites Brake Pad Spreader is the ideal tool to have when changing brake pads on your motorcycle. The tool simply but effectively pushes the pistons back into the caliper allowing for easy removal and installation of the brake pads, all without causing damage to the new brake pads or the pistons. Compatible with all front and rear brake calipers and a seperation range of 5mm (0.25") to 58mm (2.25").

Compresses the brake pistons on calipers for easy pad replacement
Designed to fit all front and some rear disc brakes
Spread range of 5mm (0.25") to 58mm (2.25")

Constructed with a wide pan the Whites Oil Drain Pan collects any oil and compensates for splashes. The 6-litre capacity ensures you won't overflow even when servicing multiple motorcycles. Perfect for professional or personal workshop use.

• 6-litre capacity
• Pouring spout for clean disposal
• Durable plastic construction

Extend the life of your fork seals and reduce stress on your fork springs with the Whites Fork Seal Savers. The seal saver prevents over compression of your front end by bridging the gap between your tyre and front mudguard, designed with a curved bottom to prevent damage to your tyre and tube and also gives a firmer hold for your tie downs. The seal savers also stop your forks compressing further while in travel, which can cause your tie downs to pop off and your beloved ride toppling over.

Curved mount matches tyre to prevent denting into the tyre and damaging your tube, tyre and rim
Prevents premature damage to your fork springs and seals from continuous compression
Stabilises bike and prevents tie downs popping off when on bumpy roads
Raised top reduces surface contact preventing damage to front mudguard
Crossbar holds seal saver in place when loading your ride
Plastic construction is lightweight and durable for easy transportation and extended life

Dimensions (mm): 293 x 231 x 98
Colour: Red

Fork seal head tool for Big Piston forks

The Whites BPF Fork Seal Head Tool holds fork cartridges for dissassembly, assembly and removal of the cartridge seal head from the tube. The tool enables you to change the fork springs without valve disassembly on 41mm and 43mm big piston forks, decreasing the time it takes and simplifying servicing big piston forks.

Holds fork cartridges for disassembly, assembly and removal of cartridge seal head from the tube
It helps you to change fork springs without valve disassembly
Compatible with 41mm and 43mm big piston forks

Dimensions:

Top: 33mm A/F (hex)

Bottom: 35mm A/F (hex)

Internal: 18mm

Pin for the Whites Headstock Stand.

The Whites Tyre Valve Core Tool is an ideal tool when working on tyres and tubes. The tool quickly and easily removes the valve core from the tube releasing all air. Manufactured with a knurled handle for additional grip and a lightweight corrosion resistant aluminium construction.

Removes valve core quickly and easily
Knurled handle for grip
Lightweight aluminium construction
5-1/2" long

Make your maintenance and repair jobs quicker and easier with the Whites T-Handle Sockets. Including 5 T-Handle sockets from 6mm to 14mm and a #2 Phillips socket, the set covers all common nut and bolt sizes on your bike, perfect for those quick and easy to access nuts and bolts. The miniature-sized T-Handle is great for your hydration pack for on the trail maintenance, with three different positions for you to mount your sockets, tailoring to the leverage required for the job.

• Deep socket design
• Constructed from high-quality chrome vanadium steel
• 6-piece mini T-handle set
• Faster and easier than spanners
• Mini size fits in your hydration pack
• Perfect for on the trail repairs
• Easy to fit in the toolbox for trackside maintenance and repairs
• Includes a #2 Phillips socket

Includes Sizes:

• 6mm
• 8mm
• 10mm
• 12mm
• 14mm
• #2 Phillips

The Whites Needle Bearing Press Tool is designed to install/remove needle bearings on ATV a-arms. The tool is designed specifically for and ompatible with KTM 450 and 525 ATVs. Manufactured from hardened steel for strength and durability and a black oxide finish for corrosion resistance.

Used to install/remove a-arm needle bearings
KTM 450/525 ATV specific design
Hardened steel construction
Black oxide finish

The Whites Fork Oil Level Tool is the perfect tool for checking and adjusting the internal fork oil volume on all conventional and single chamber cartridge forks. The aluminium measuring tube features laser-etched measuring marks from 0-300mm in 5mm increments. The included syringe has a 60ml capacity for adding or removing fork oil to ensure a balanced height in both forks, improving handling and rider confidence.

Compatible with all conventional and single chamber cartridge forks
Aluminium measuring tube indicates height from 0-300mm in 5mm increments
60ml capacity syringe for adding or removing oil
Adjustable locking ring sets collar height
Ensures precise oil heights in forks
Also compatible with bicycles with front suspension

Changing your brake fluid is one of the most tedious maintenance jobs you can do to your motorcycle, but not anymore with the Whites Motorcycle Brake Bleeder. Made to simplify brake bleeding solo with its simple and effective design. The universal fitment allows it to be used with any caliper while the clear tube enables you to track bubbles coming out and when the fresh fluid has reached the other end.

One way alloy valve prevents air from being drawn into the system
Clear tubing to track bubbles and fresh oil
Easy to use, fastens and simplifies brake bleeding
Universal fitment with clamps to secure line in place
Makes bleeding your brakes a one-person job

Many chains use a master link to secure the chain together, the Whites Master Link Pliers make removal and replacement of the master link quick and effortless. Insert the jaws into the master link and tighten the forcing screw until the link is separated. Compatible with 25, 415, 420, 425 and 428 sized chains.

Rubber handle provides additional grip
Compatible with 25, 415, 420, 425 and 428 chain sizes
Significantly simplifies master link installation

These Trail Tech Kickstands are designed for off-road motorcycles. They are durable, lightweight, and easy to use, keeping your motorcycle upright on any terrain. Made from forged 7075 aircraft-grade aluminium, Trail Tech Kickstands have the strength to endure the harshest conditions.

Specifications:

• Forged 7075 aircraft-grade aluminium.
• Matte black surface.
• Machined cutouts.
• Model-specific brackets.

Reasons to purchase a Trail Tech Kickstand:

• Model-Specific: Trail Tech Kickstands are available in various sizes and styles to fit different makes and models, ensuring compatibility with a wide range of motorcycles. They come equipped with a large foot, which helps prevent the kickstand from sinking into soft soil or sand.
• Easy to Install: Trail Tech Kickstands are engineered for simple installation. Only basic tools and minimal mechanical knowledge are required for quick installation.
• Durable and Reliable: Trail Tech Kickstands are built to last from high-quality materials. They are designed to withstand the rigours of off-road riding.
• Convenient and Versatile: Trail Tech Kickstands make it easy to stop and dismount your bike on any terrain or surface. Whether pausing for a quick break or setting up camp for the night, the kickstand provides stability, allowing you to focus on enjoying your ride.
• Lightweight and Compact: Trail Tech Kickstands won't add unnecessary weight or bulk to your bike.

Disclaimer:

Trail Tech Kickstands are intended for motorcycles with OEM equipment. Altering a bike with aftermarket wheels, suspension, or street tyres can change a motorcycle's ride height and proper lean angle when parked. Please consider this when purchasing.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M27 x 1.25
Thread Direction: Right Hand
Type: Male (External Thread)

With a CNC-machined aluminium body, the Oxford Stand Bobbins make easy work of lifting your motorcycle without damaging/scratching the rear swingarm. Most motorcycles have pre-threaded holes for bobbins and Oxford offers a vast range of thread sizes to accommodate many motorcycles.

Features:

• Makes fitting a rear paddock stand to your motorcycle much easier and quicker.
• Does not mark the motorcycle swingarm.
• The majority of motorcycles have pre-threaded holes in their swingarms to fit bobbins or spools.
• Safely fit a rear paddock stand to motorcycles with uneven swingarms.
• CNC machined aluminium body.