Work Shop

Absorbent pads for general purpose workshop use.

Features:

• Ideal for catching drips and soaking up spills under motorcycles, cars or any motorised vehicles.
• Absorbs and retains oil and oil-based liquids such as engine/gearbox oil, fuel and most brake fluids.
• Hydrophobic, so can be used to clean up spills on water.
• Dimensions: 120 x 50cm

The Whites 4-in1 Hex Axle Tool is compatible with most late model sport and off-road motorcycles. The tool includes 17mm, 19mm, 22mm and 24mm sizes for quick and easy removal or installation of the axle. Constructed with a 3/8" drive recess on both ends for use with ratchets and torque wrenches. Manufactured from heat treated chromoly steel for exceptional durability and enabling the ends to handle up to 150 foot-pounds of torque.

3/8" socket drive on both ends
Heat treated Chromoly steel construction
17mm, 19mm, 22mm and 24mm hex sizes
Capable of torquing to 150 foot-pounds
Black oxide finish

Pin for the Whites Bike Stand.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M28 x 1.0
Thread Direction: Right Hand
Type: Female (Internal Thread)

The Whites Carburetor Float Level Gauge is the perfect tool for measuring float level height between the float and carburetor gasket surface. The tool has an adjustable width of 16-78mm to fit most carburetors and can measure a float height of up to 40mm. The steel construction provides strength and durability ensuring a long life. It is important to keep the correct amount of fuel in your float bowl, too high and your bike can run rich, too low and your bike runs lean.

Helps set accurate float level height
Measures heights up to 40mm
16-78mm adjustable width suits most carburetors
Steel construction for strength and durability

Designed to push the tyre bead down into the drop centre of the rim without fighting while installing or repairing your off-road tyres/tubes. The nylon thumbscrew keeps rims from being scratched when in use. Constructed from 6000 series aluminium. It will facilitate pulling the tyre over the edge of the rim allowing for easier and faster tyre removal and installation. No more fighting to keep the bead down while installing off-road tyres.

- For many uses around workshop, garage or home
- Ideal for general cleaning, polishing, detailing or wiping up water, oil, chemicals and mopping spillages.
- Composition: 80% polyester / 20% polyamide
- Size: 90 x 55cm

Recommended use:
Dry: Microfibre cloth uses static electricity to clean and polish glass, dash, instruments etc. without using any chemicals.
Damp: to clean off stubborn marks leaving a streak-free finish, without using any chemicals.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M20 x 1.5
Thread Direction: Right Hand
Type: Male (External Thread)

The Whites Tappet Adjusting Tool Set includes three wrenches (8, 9 and 10mm) and three tappet adjusters (3, 4mm and slot). The wrenches have covered and coloured handles for excellent grip and quick size identification while the tappet adjusters have a knurled top for easy operation. The toolset is compatible with most makes and models for diverse application, perfect for your home garage or professional workshop.

Three wrenches
Three tappet adjusters
Coloured handles for easy identification
Knurled end for additional grip
Covered handle for comfort and grip
Wrench sizes: 8mm, 9mm and 10mm
Tappet adjusters: 3mm, 4mm and slot type

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, Oxford's Garage Signs are also the perfect gift for the biker who's got it all!

Features:

• Indoor use only.
• Made from high quality coated metal tin plate with rolled edges.
• 4 x 3.2mm pre-drilled holes for attachment.
• Dimensions - 30 x 20cm x 0.25mm thick.
• Weight - 124g
• Different styles and mottos available.

These Trail Tech Kickstands are designed for off-road motorcycles. They are durable, lightweight, and easy to use, keeping your motorcycle upright on any terrain. Made from forged 7075 aircraft-grade aluminium, Trail Tech Kickstands have the strength to endure the harshest conditions.

Specifications:

• Forged 7075 aircraft-grade aluminium.
• Matte black surface.
• Machined cutouts.
• Model-specific brackets.

Reasons to purchase a Trail Tech Kickstand:

• Model-Specific: Trail Tech Kickstands are available in various sizes and styles to fit different makes and models, ensuring compatibility with a wide range of motorcycles. They come equipped with a large foot, which helps prevent the kickstand from sinking into soft soil or sand.
• Easy to Install: Trail Tech Kickstands are engineered for simple installation. Only basic tools and minimal mechanical knowledge are required for quick installation.
• Durable and Reliable: Trail Tech Kickstands are built to last from high-quality materials. They are designed to withstand the rigours of off-road riding.
• Convenient and Versatile: Trail Tech Kickstands make it easy to stop and dismount your bike on any terrain or surface. Whether pausing for a quick break or setting up camp for the night, the kickstand provides stability, allowing you to focus on enjoying your ride.
• Lightweight and Compact: Trail Tech Kickstands won't add unnecessary weight or bulk to your bike.

Disclaimer:

Trail Tech Kickstands are intended for motorcycles with OEM equipment. Altering a bike with aftermarket wheels, suspension, or street tyres can change a motorcycle's ride height and proper lean angle when parked. Please consider this when purchasing.

The Whites 4-in-1 Hex Axle Tool is compatible with most late model sport and off-road motorcycles. The tool includes 17mm, 19mm, 22mm and 24mm sizes for quick and easy removal or installation of the axle. Manufactured from forged 7075-T6 aluminium for a lightweight design and enabling torque up to 90 foot-pounds.

• Forged 7075-T6 aluminium for a lightweight nature
• 17mm, 19mm, 22mm and 24mm hex sizes
• Capable of torquing to 90 foot-pounds
• Anodised finish
• Colour: Blue

The Whites 4-in-1 Hex Axle Tool is compatible with most late model sport and off-road motorcycles. The tool includes 17mm, 19mm, 22mm and 24mm sizes for quick and easy removal or installation of the axle. Manufactured from forged 7075-T6 aluminium for a lightweight design and enabling torque up to 90 foot-pounds.

• Forged 7075-T6 aluminium for a lightweight nature
• 17mm, 19mm, 22mm and 24mm hex sizes
• Capable of torquing to 90 foot-pounds
• Anodised finish
• Colour: Blue

These Trail Tech Kickstands are designed for off-road motorcycles. They are durable, lightweight, and easy to use, keeping your motorcycle upright on any terrain. Made from forged 7075 aircraft-grade aluminium, Trail Tech Kickstands have the strength to endure the harshest conditions.

Specifications:

• Forged 7075 aircraft-grade aluminium.
• Matte black surface.
• Machined cutouts.
• Model-specific brackets.

Reasons to purchase a Trail Tech Kickstand:

• Model-Specific: Trail Tech Kickstands are available in various sizes and styles to fit different makes and models, ensuring compatibility with a wide range of motorcycles. They come equipped with a large foot, which helps prevent the kickstand from sinking into soft soil or sand.
• Easy to Install: Trail Tech Kickstands are engineered for simple installation. Only basic tools and minimal mechanical knowledge are required for quick installation.
• Durable and Reliable: Trail Tech Kickstands are built to last from high-quality materials. They are designed to withstand the rigours of off-road riding.
• Convenient and Versatile: Trail Tech Kickstands make it easy to stop and dismount your bike on any terrain or surface. Whether pausing for a quick break or setting up camp for the night, the kickstand provides stability, allowing you to focus on enjoying your ride.
• Lightweight and Compact: Trail Tech Kickstands won't add unnecessary weight or bulk to your bike.

Disclaimer:

Trail Tech Kickstands are intended for motorcycles with OEM equipment. Altering a bike with aftermarket wheels, suspension, or street tyres can change a motorcycle's ride height and proper lean angle when parked. Please consider this when purchasing.

The Oxford Airtrack pump is a steel floor pump with gauge.

Features:

• Twin head fits Presta and Schrader valves.
• 160PSI Max Pressure.
• 630mm length.
• Pressure gauge.
• Super tough steel barrel.
• Includes adaptors for ball and inflatables.
• Ergonomic handle and foot plate.
• Long air pipe for greater reach.

Anyone for a sausage? Turn your Oxford Firepit into a barbecue by adding the Grill attachment. With an easy to clean cooking surface, the interlocking grill topper will enable you to rustle up a small feast in no time.

After you've finished cooking and the grill is cool, simply pull apart, wash and pack away along with the Firepit into the handy carry pouch.

The ultra- compact design means you can bring this with you as it's small enough to fit into most luggage, specifically a motorcycle pannier.

Key Features:

• Designed to be used with the Oxford Firepit (sold separately — 'OXOX876 OXFORD FIRE PIT').
• Cooking area measures 240mm x 205mm.
• Flat-packs into 600D polyester Firepit carry pouch measuring 320 x 120 x 15mm.
• Easy to clean.
• Tool-free assembly.
• Lightweight stainless steel construction — 0.6kg.

The Oxford Chain Tensioner is a revolutionary chain tensioning tool; its simple design allows anyone to check and set their chain tension quickly, easily and with minimal knowledge required.

Features:

• Improve performance.
• Increases chain life.
• Prolong sprocket life.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• 50mm x 1.5 Right hand Female
• Includes crankshaft thread protector cap

The Oxford Big Black Bike Front Stands allow you to stabilize your bike for maintenance or storage. Constructed from robust 32mm steel tubing, the Oxford Big Black Paddock Stands are strong and durable. Four wheels provide excellent stability for your motorcycle, giving you peace of mind when maintaining or storing your motorcycle. Extended handles provide excellent leverage, making the lift seem effortless.

Features:

• Robust construction using 32mm steel tube.
• Four chunky wheels for maximum stability.
• Extended handles for maximum leverage.
• Max load: 200kg

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, Oxford's Garage Signs are also the perfect gift for the biker who's got it all!

Features:

• Indoor use only.
• Made from high quality coated metal tin plate with rolled edges.
• 4 x 3.2mm pre-drilled holes for attachment.
• Dimensions - 30 x 20cm x 0.25mm thick.
• Weight - 124g
• Different styles and mottos available.

Aussie’s only locally made tie down! Superior strength that exceeds Australia and NZ standards.

Features:

• 38mm fray-resistant UV-stabilised high-tensile polyester webbing.
• 375 kg lashing capacity.
• Soft loop upper extension built in.
• Carabiner snap lower hook for secure fastening.
• High resistance to breaking.
• UV stabilized.
• Powder coated steel hooks.
• Aluminium carabiner.
• Total length: 183 cm

The Acebikes TyreFix® Essential is a tie-down set with a special tie-down strap system for securing any type of motorbike on a trailer, van or transporter.

The TyreFix® Essential ensures secure fixing and total protection. The flexible and durable material suits every tyre size.

To prevent your motorbike from moving, the TyreFix® Essential system is provided with special friction material. The construction is fully sectioned for easy fitting and removal.

Features:

• Easy to attach.
• Durable high-quality materials.
• Special friction material to prevent movement.
• Suitable for every tyre size.
• Fully sectioned construction for easy fitting and removal.

Specifications:

• Material(s ): Polyester
• Net Weight: 1.00 kg
• Gross Weight: 1.14 kg
• Load Capacity: 500 daN
• Strap Width: 4.7 cm
• Package Dimensions (L x W x H): 33 x 25 x 5.5 cm

ZERO-G paddock stands cater for all kind of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands.

All of our paddock stands are engineered using the latest CAD technology and 3D modelling techniques. By being scientifically designed to minimise the required effort to move a given load, our new ZERO-G range of paddock stands literally take the weight off. Even better, they are able to do this without weighing too much themselves, making them even easier to use and live with.

ZERO-G front and rear Dolly paddock stands enable you to manoeuvre your motorcycle whilst elevated.

With a rigid oval steel construction and heavy-duty fasteners, these are reassuring solid and stable workshop stands.

The lockable caster wheels make it easy to turn your bike in a small space, ideal for home workshops and garages where space is at a premium.

RiDE Magazine rated the Zero-G BEST BUY in their market review. They praised the clear instructions, finish and large wheels and declared it was the easiest stand to lift a bike with on the test.

Features:

• Durable steel construction.
• Oval tubing to prevent rotation.
• Torsional supports for increased stability.
• Billet aluminium top cap for tight interface with lifting forks.
• Robot welded for high build quality and consistency.
• Heavy duty fasteners.
• Heavy duty casters allow the motorcycle to be moved on the stand.
• Lockable casters to prevent unwanted rolling.
• Max load: 250kg
• Stand weight: 5.8kg
• Lift height: 325mm (pin centre)

Warning:

• Lifting forks may not be suitable for all motorcycles - check fitment method for suitability before purchase.
• Always use in combination with a front stand.

Lifting pins for the ZERO-G Single-Sided Paddock Stand (OXOX266)

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, Oxford's Garage Signs are also the perfect gift for the biker who's got it all!

Features:

• Indoor use only.
• Made from high quality coated metal tin plate with rolled edges.
• 4 x 3.2mm pre-drilled holes for attachment.
• Dimensions - 30 x 20cm x 0.25mm thick.
• Weight - 124g
• Different styles and mottos available.

Part of Oxford's Advanced Accessories range, the Oxford Airtrack Pro is a steel floor pump with gauge.

Features:

• Smart head for use with Presta and Schrader valves.
• Steel barrel and base.
• Valve lock.
• Top-mounted gauge.
• Max Pressure: 160 PSI

Gorrillas Grip is Aussie’s only locally made tie down! Tried, tested, and proven throughout Australia in the harshest of conditions for over 15 years.

Features:

• 38mm fray resistant UV stabilised high tensile polyester webbing.
• 375 kg lashing capacity.
• Soft loop upper extension built in.
• Carabiner snap lower hook for secure fastening.
• High resistance to breaking.
• UV stabilized.
• Powder coated steel hooks.
• Aluminum carabiner.
• Total length: 183 cm

Oxford Ear Plugs as used and recommended by MotoGP star Bradley Smith.

Features:

• Each pack includes 2 pairs of high-quality earplugs that are shaped for maximum comfort.
• This giant 100-pack box is perfect for your workshop or any other high- volume environment.
• Colour-coded to prevent accidental ear plug sharing.

The Whites Bearing Remover allows you to drive the bearing out of the hub easily. The Split groove enables you to place a screwdriver or impact driver for when the bearing is nearing the opposite side. The Whites Bearing Remover prevents the bearings twisting and turning in the hub ensure a straight a true removal/installation, preventing damage to the inner hub.

Steel construction
Prevents bearing twisting during installation/removal
Groove for screwdriver or impact driver to push the bearing
Size: 30mm

With a CNC machined aluminium body, the Oxford Stand Bobbins make easy work of lifting your motorcycle without damaging/scratching the rear swingarm. Most motorcycles have pre-threaded holes for bobbins and Oxford offers a vast range of thread sizes to accommodate many motorcycles.

Features:

• Makes fitting a rear paddock stand to your motorcycle much easier and quicker.
• Does not mark the motorcycle swingarm.
• The majority of motorcycles have pre-threaded holes in their swingarms to fit bobbins or spools.
• Safely fit a rear paddock stand to motorcycles with uneven swingarms.
• CNC machined aluminium body.

The Whites Shock Seal Head Tool helps you to easily remove and install the shock seal head assembly. Designed to be simply pushed down without causing damage to the seal head when detaching the circlip of the shock body. Constructed with a knurled edge for additional grip preventing slips when detaching the circlip.

Helps you to easily remove and install the shock seal head assembly
Pushes down the seal head when detaching the circlip
Prevents damage to the shock body, circlip and seal head
Knurled edge for additional grip preventing slips
For use with 33-36mm shocks