All Products

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets necessary to rebuild the water pump.
• Designed to fit O.E.M. water pump.

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

K5 Series:

The K5 sintered compound is optimal for off-road motorcycles and ATVs. It is recommended for riders who demand great off-road stopping power and brake pad durability when riding on tough off-road terrains. The K5 series is designed for low abrasive interaction with the rotor, long life and self-cleaning capabilities necessary in off-road riding conditions. Friction materials contain metal-ceramic with a sophisticated bronze-graphite and full-metal mixture formulation with fine friction particles to achieve optimal friction properties.

Features:

• High static friction coefficient
• Good abrasive resistance
• Self-cleaning capability
• Low abrasive interaction with the brake rotor material
• Up to 3 times longer operational life compared to organic and Kevlar composite materials

Application:

• Developed specifically for off-road motorcycles & ATVs
• Can be used on both front and rear brakes
• Could be used on the rear brake of road racing motorcycles

Operating Parameters:

• Specific pressure: 2.0 Mpa
• Sliding velocity: 20 m/s
• Constant maximum temp: 500°C
• Short time maximum temp: 750°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

All Balls Fuel Pump Kits are designed to restore lost performance caused by a failing or non-functioning fuel pump. Each kit offers a plug-and-play solution for quick and easy replacement of your OEM fuel pump module.

Kit contents vary by application and may include components such as the pump, filter, hoses, clamps, and wiring harness. Some kits contain only core components like the pump and filter. Please refer to the product image and listing details for exact contents specific to your model.

Features:

• OEM replacement fuel pump kits.
• Plug-and-play installation.
• Contents vary by kit — check image and listing for details.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

Quantum replacement fuel pumps, regulators, tank seals and strainers are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

Features & Benefits

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

The K&N PreCharger filter wrap is specially designed to extend the service interval of your K&N Filtercharger filter when used in very dusty conditions. They are made from durable polyester material containing a uniform weave. The PreCharger will stop small dirt particles with minimal restriction to the airflow of the filter.

Features:

• This product wraps your air filter with an additional pre-filter.
• Extends service interval of your K&N filter in dusty conditions.
• Durable polyester material with stitched elastic openings.
• Cleanable with K&N Filter Cleaner.

Specifications:

• Wrap Material: Polyester
• Base Inside Diameter: 127mm
• Top Inside Diameter: 121mm
• Height: 203mm

• 40% higher tensile strength and 50% more abrasion resistant than conventional material
• Suitable for the high joint angles and demands of today's ATVs and UTVs
• Kits include two stainless steel clamps that are designed to be tightened without the use of special tools
• Lithium-based molybdenum grease ensures good lubrication for long CV joint life

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration are,a offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Filte r Material: Cotton Gauze
• Washable: Yes
• Height: 33mm
• Outside Length: 143mm
• Outside Width: 110mm
• Filter Re-Oiling Amount: 9ml

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Brake shoes 

• Direct OEM replacement fuel line clamp kit
• This ultimate fuel line clamp kit is an absolute necessity for any shop, technician, or DIY mechanic
• Kit contains 4 of each Fuel Star fuel line OEM replica clamps, available in sizes from 7-17mm I.D.
• Each clamp is an exact replica of the major OEM's fuel line clamps and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• 4-packs also available to refill the kit

PH SERIES – Street Sport Sintered

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Front lifting forks for use with Zero-G Lite, Zero-G and Paddock Stands.

The Oxford Nomad Adventure Harness is a MOLLE-compatible, universal saddle-mounted base for attaching multiple luggage accessories.

Features:

• PALS webbing front panel for attaching NOMAD accessories.
• Durable, weatherproof 600D polyester construction.
• x4 adjustable fitting straps.
• D-ring webbing attachment points.
• Hypalon® protection tabs.
• Designed for enduro and adventure bikes.

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust, and protects axle from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defense, shielding vulnerable joints and preventing leaks. High performance molybdenum grease reduces heat and friction.

• In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% molybdenum grease.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Heigh t: 1.313in (33mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Outside Length: 9.688in (246mm)
• Outside Width: 7.156in (182mm)
• Filter Re-Oiling Amount: 0.85oz (25ml)

The best luggage allows you to explore wherever, whenever. Oxford's range- topping Atlas modular luggage range can take you to the shops or around the globe.

If you need to expand or contract your carrying capacity, you can quickly add or subtract a bag using its modular luggage system. The main compartments are always accessible even whilst mounted to your bike and four adjustable compression straps per bag ensure load stability.

Your kit will stay dry and be easy to access, thanks to its waterproof construction. The internal waterproof compartment can be fully removed or even doubled up to keep contents separated and additional waterproof inserts in 10l, 20l or 30l can be added. Just four turns of the roll-top opening create a watertight seal.

When you want to grab everything quickly off the bike and make a dash for it, you can rely on its universal fast fit.

Features:

• Lifetime guarantee.*
• Duraflex® buckles and tri-glide adjustment sliders.
• Aluminium alloy G-hooks.
• YKK® AQUAGUARD® zippers with TPU pullers.
• 3-point adjustable roll-top opening.
• Underseat security strap.
• Detachable shoulder strap for portability.
• Grab handles at the top, bottom, and sides.

Storage:

• PU-coated mesh side pocket for drying kit (T20, T30 only).
• Quick access side pocket (T20, T30 only).
• Quick access top pocket.
• Contrast lining to improve pocket internal visibility.
• 100% waterproof main compartment (fully detachable).

Fabrics:

• Zoned 420D PU-backed polyester ripstop for flexibility and compactness.
• 1000D PU-backed polyester.
• 1mm Hypalon® underside for durability.
• 0.6mm Hypalon® front panel.
• Reflective components.

Included:

• 4 x Connector G-Hook Loop
• 2 x Central Connection Strap
• 2 x Left G-Hook Connection Straps
• 2 x Right G-Hook Connection Straps
• 1 x Security Strap
• 1 x Shoulder Strap
• 1 x Dry Liner
• User information and fitting instructions

* Against faulty materials or manufacture. Excludes reasonable wear and tear. This does not affect your statutory rights.

** Additional dry bags sold separately.

Bolt brand bolts, nuts and washers meet all OEM standards. Designed with precision, each bolt comes in a convenient pack of 10.

100% Genuine and brand new Philips bulb.

• 12V,35W
• Single.
• Ultimate white (5,000Kelvin) light to stand out.
• Ideal for city driving.
• Easy installation, plug and play.
• UV-blocking quartz glass.
• No wiring/relays needed.

Some say that size doesn't matter. When it comes to locks, chains, and anchors it matters! The Oxford BEAST is so big it comes with a health warning on the box: WARNING - HEAVY!

With the Beast Lock and Chain being so big and strong you need something beastly to anchor it down. The Beast Anchor is an extra strong bolt-down anchor. Double layered in strength and with hardened steel construction, it really does live up to its name. Weighing in at a whopping 4kg it can be fitted to concrete floors and or concrete/brick walls.

The Beast lock, chain, and anchor have achieved a Sold Secure DIAMOND rating, ensuring it is able to withstand forceful and sustained attacks. To be awarded a DIAMOND is no small feat. The Beast has passed attack tests from a huge range of tools, commonly used by thieves including, pliers bolt croppers, drills, and most impressively a 90-second angle grinder attack.

Key Features
• Resists angle grinder attack.
• Double layered strength with hardened steel construction.
• 22mm Beast chain compatible, fits all Oxford chains and locks.
• Weighs 4kg.
• Independently tested - Sold Secure Motorcycle DIAMOND.
• Anti-tamper fittings.

All fittings and instructions included:
• 4 x high-security expansion bolts.
• 4 x anti-tamper ball bearings.
• 4 x steel plugs to create an unassailable anchor.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Ideal replacement for dirt bikes.

Features:

• Anti-swell alloy impregnated heavy-duty cork-based facings.
• Smooth clutch take up compared to paper clutches, which can ‘snatch’.
• Steel separator plates increase flywheel effect of the engine and improve performance.

STARTER RELAY HON CBR1000 RA 09-16

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

PR Series Brake Pad
SINTERED PADS FOR OFF ROAD USE

Off Road "Sintered"
Premier "PR" pads have been upgraded to a HIGH DENSITY sintered metal compound suitable for all types of MX and ATV use

Not for highway use.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.