Products

Hands down, the most complete line of linkage bearing and seal kits!

Kit contains all of the components required to properly rebuild the linkage bearing assembly. Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground.

All metal bushings are case-hardened and plated to prevent wear and corrosion.

POM composite washer bearings replace thru needle washers, increase service life, and add superb resistance to water and dirt.

Stop burning your voltage regulator rectifier! It is time to update or replace your voltage regulator with the advanced MOSFET type.

It runs cooler than all SCR diode-style OEM regulators. In addition, this rectifier has overheat protection, rather than burn up it will simply turn off for a while and cool off.

Top Features:

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• The quality exceeds the OEM part
• Higher grade of electric components

Opposite connector (main harness side) included as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Why do you need a different voltage regulator for lithium batteries?

Lithium batteries have different charging requirements than Lead Acid or AGM batteries that can severely affect their lifespan and performance. The key factors in safe and reliable lithium battery charging are the output DC voltage ripple and average output voltage. The RMSTATOR regulator is designed around the optimal parameters for these factors.

The ripple effect is all that matters

Charging voltage ripple in a Powersports application is the difference between the highest and lowest voltages from the voltage regulator output. By nature, a common shunt style voltage regulator will have a fairly high voltage ripple due to the regulation shunt switches opening and closing frequently. Each on/off transition will cause some variation in the output voltage, this is unavoidable. Keeping this to a minimum is critical for Lithium batteries, and the RMSTATOR Lithium regulator is designed around this feature.

In a perfect world, a ripple of less than 10% of the output voltage (~1.5V for a typical regulator), would be ideal, however, is not practical for this type of regulator. The RMSTATOR Lithium regulator is able to maintain a less than 4 Volts output ripple, compared to verified test results of our competitors 8 volts. Keep in mind this ripple voltage is only seen via an Oscilloscope sampling the voltage 1000’s of times a second, and is not the same as your average charging voltage as measured by a multimeter.

Stator Dimensions:

• Interior diameter: 18 mm
• Exterior diameter: 68 mm
• Thickness: 42 mm
• Length of wires stator to grommet: 125 mm
• Length of wires grommet to plug: 500 mm

Other Specifications:

• Number of wires: 3
• Number of plugs: 1
• Number of pins: 3
• Alternator: Between each White = 0.4 ohms +/-20%

Regulator Dimensions:

• Width: 94 mm
• Length: 114 mm
• Height: 32 mm
• Fixation holes centre to centre: 74 mm

Other Specifications:

• Number of plugs: 2
• Number of pins: 5
• Number of wires: 5
• Minimum Charging Voltage: 14.0 V ± 0.2 V DC
• Maximum Charging Current: 50 A / 500 W
• Operation Temperature: -20° to 85°

Flywheel Dimensions:

• Exterior Diameter: 80 mm
• Interior Diameter: 69 mm
• Interior Diameter Center Housing: 12 mm
• Exterior Diameter Center Housing: 18 mm
• Thickness (exterior): 11 mm
• Thickness (interior): 6 mm

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Upgrade rubber bushings found in Utility ATV A-Arms to redesigned HD Delrin bushings. This kit is designed to replace worn-out rubber bushings and provides greater suspension travel and performance.

Contains all bearings, seals, shafts and components to repair A-Arm bearing failure.

• Upgrade rubber bushings found in Utility ATV A-Arms to All Balls' redesigned HD Delrin bushings.
• Designed to replace worn-out rubber bushings and provides greater suspension travel and performance.
• Each kit contains necessary bushings, hardened pins and seals to assure long component life.
• Kits are sold per A-Arm.

High-quality lower rear shock bearing kit from All Balls.

This kit contains all the bearings required to rebuild your lower rear shock to factory specifications.

A quality rear shock bearing kit from All Balls Racing.

• Kits are supplied with either Needle Bearings or Spherical Bearings according to OE vehicle configuration.
• Also included are cup-type seals-OEM style and hardened and precision ground bushes.

A quality rear shock bearing kit from All Balls Racing.

• Kits are supplied with either Needle Bearings or Spherical Bearings according to OE vehicle configuration.
• Also included are cup-type seals-OEM style and hardened and precision ground bushes.

A quality rear shock bearing kit from All Balls Racing.

• Kits are supplied with either Needle Bearings or Spherical Bearings according to OE vehicle configuration.
• Also included are cup-type seals-OEM style and hardened and precision ground bushes.

A quality rear shock bearing kit from All Balls Racing.

• Kits are supplied with either Needle Bearings or Spherical Bearings according to OE vehicle configuration.
• Also included are cup-type seals-OEM style and hardened and precision ground bushes.

Kit contains all of the components required to properly rebuild the lower shock bearing assembly.

• Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground.
• All metal bushings are case-hardened and plated to prevent wear and corrosion.
• POM composite washer bearings replace thru needle washers, increase service life and improve resistance to water and dirt.

Kit contains all of the components required to properly rebuild the lower shock bearing assembly.

• Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground.
• All metal bushings are case-hardened and plated to prevent wear and corrosion.
• POM composite washer bearings replace thru needle washers, increase service life and improve resistance to water and dirt.

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

Bluetooth communication system co-developed with Cardo, tailored specially for LS2 Helmets. Sound by JBL, live intercom for up to 4 riders, natural voice operation, waterproof design, and many more features. Enjoy communicating with your voice assistant or travel partners.

Features:

• Live sound. Live connection. Experience exceptional audio quality with our all-new auto-reconnecting Bluetooth intercom. For 4 riders at a range of up to 1.2km / 0.75mi.
• Always-on natural voice operation removes the need to press buttons. Just say "Hey Cardo" and give a command—your FREECOM 4X will do the rest.
• Powerful 40mm high-definition speakers engineered by JBL, with a specially tuned music processor and three distinctive audio profiles.
• Waterproof design handles rain, shine, mud, dust, or snow while keeping you connected.
• Stream music directly from your smartphone. Control, share, and experience your favourite tunes on the road.
• FM radio with 6 preset station memory.
• Make calls and control GPS with a touch or via voice.
• Running low on battery? Get 2 hours of talk time with just 20 minutes of charging.
• Talk time: 13 hours.
• Charging time: Up to 2 hours.
• Stay updated with Over-the-Air software updates.
• Equipped with a robust and universal USB Type-C port.

Compatible Helmet Models:

Full Face

• FF805 Thunder GP Aero
• FF805 Thunder / Thunder GP Aero and Thunder FF805 Thunder GP Pro (FIM)
• FF807 Dragon
• FF811 Vector II Carbon
• FF811 Vector II
• FF800 Storm II
• FF808 Stream II
• FF353 Rapid II

Modular

• FF901 Advant X Carbon
• FF901 Advant X
• FF910 Advant II
• FF906 Advant
• FF902 Scope II
• FF908 Strobe II

Open Face

• OF603 Infinity II Carbon
• OF603 Infinity II
• OF618 Verso II
• OF620 Classy
• OF600 Copter II
• OF599 Spitfire II
• OF558 Sphere Lux II
• OF616 Airflow II
• OF558 Sphere II

Off Road

• MX708 Fast II

Adventure

• MX702 Pioneer II

Features:

• Lens Replacement for Aura / Aura Pro Goggles
• Injected polycarbonate lens with outstanding Anti-fog and Anti-scratch coating
• Offer 100% UVA and UVB protection

LS2's Aura goggles brings specs and feature usually reserved for premium goggles. Dual injection moulded frame for optimised strength and durability. Polycarbonate clear lens as standard with premium anti-scratch coating and Pinlock system offering unrivalled anti-fog. Triple layer moulded foam provides a tight seal and actively wicks sweat away from the eyes.

Features:

• 360° ventilation
• Dual outrigger system
• Pinlock Ready
• Removable nose guard
• 100% UVA & UVB Protection
• 50mm strap for easy adjustment and thick silicon strips for grip
• EN 1938:2010 certified

LS2 Aura Goggles Laminated Tear-off Pack

Includes 7 PCS

LS2's Aura goggles brings specs and feature usually reserved for premium goggles. Dual injection moulded frame for optimised strength and durability. Polycarbonate clear lens as standard with premium anti-scratch coating and Pinlock system offering unrivalled anti-fog. Triple layer moulded foam provides a tight seal and actively wicks sweat away from the eyes.

Features:

• 360° ventilation
• Dual outrigger system
• Pinlock Ready
• Removable nose guard
• 100% UVA & UVB Protection
• 50mm strap for easy adjustment and thick silicon strips for grip
• EN 1938:2010 certified

LS2's Aura goggles brings specs and feature usually reserved for premium goggles. Dual injection moulded frame for optimised strength and durability. Polycarbonate clear lens as standard with premium anti-scratch coating and Pinlock system offering unrivalled anti-fog. Triple layer moulded foam provides a tight seal and actively wicks sweat away from the eyes.

Features:

• 360° ventilation
• Dual outrigger system
• Pinlock Ready
• Removable nose guard
• 100% UVA & UVB Protection
• 50mm strap for easy adjustment and thick silicon strips for grip
• EN 1938:2010 certified

LS2 Aura Goggles Tear-off Pack

Includes 10 PCS

LS2's all-new Aura Pro goggles offer class-leading features and specs ensuring you can focus and engage with the ride. Dual injection moulded frame for optimised strength and durability. Polycarbonate iridium lens as standard with premium anti-scratch coating and Pinlock system offering unrivalled anti-fog. Triple layer moulded foam provides a tight seal and actively wicks sweat away from the eyes.

Features:

• 360° ventilation
• Dual outrigger system
• Pinlock Ready
• Removable nose guard
• 100% UVA & UVB Protection
• 50mm strap for easy adjustment and thick silicon strips for grip
• EN 1938:2010 certified

In the Aura Pro Box:

• Standard Tear off pack
• Laminated Tear off pack
• Spare clear lens
• Pinlock insert

Replacement peak for LS2 Coz Hyde helmets.

Replacement peak for LS2 Coz Hyde helmets.