Products

The ultimate in cool kit!

A multi-functional indicator with running lights & brake light. When activated, the indicator dynamically sweeps across from the inside to the outside of the indicator strip.

Features

• Universal Fit
• Waterproof design
• E-mark approved, suitable for road use
• 3-in-1 LED sequential indicators, brake and rear running lights
• Contains 14 LEDs housed in a tough, matt black case
• 7 LEDs for the brake and running lights
• 7 LEDs the indicators
• Voltage 12V Power 2W
• M8 bolt - thread pitch 1.25

Size: 111mm (L) x 15mm (W) x 14.5mm (D)

Includes

• A right and left indicator for rear use
• 2 resistors to regulate the flash rate

A multi-functional indicator with running lights. When activated, the indicator dynamically sweeps across from the inside to the outside of the indicator strip.

Features
• Universal Fit
• Waterproof design
• E-mark approved, suitable for road use
• 2-in-1 LED sequential indicators with running lights
• Contains 14 LEDs housed in a tough, matt black case
• 7 LEDs for the running lights
• 7 LEDs for the indicators
• Voltage 12V Power 2W
• M8 bolt - thread pitch 1.25
• Size: 111mm (L) x 15mm (W) x 14.5mm (D)

Includes
• A right and left indicator for front use
• 2 resistors to regulate the flash rate

The ultimate in cool kit!

When activated, the indicator dynamically sweeps across from the inside to the outside of the indicator strip.

Features

• Universal Fit
• Waterproof design
• E-mark approved, suitable for road use
• Sequential LED indicators
• Contains 7 LEDs behind a smoked lens, housed in a tough, matt black case
• Voltage 12V Power 2.4W
• M8 bolt - thread pitch 1.25

Size: 103mm (L) x 15mm (W) x 12mm (D)

Includes

• A right and left indicator (for front or rear use)
• 2 resistors to regulate the flash rate

The Oxford Nomad Accessory Harness is a MOLLE-compatible, universal saddle-mounted base for attaching luggage accessories.

Features:

• PALS webbing front panel for attaching Nomad accessories.
• Durable, weatherproof 600D polyester construction.
• Hypalon® protection tabs.
• D-ring attachment points.
• Adjustable fitting straps to fit directly to motorcycle and luggage.

The Oxford Nomad Adventure Harness is a MOLLE-compatible, universal saddle-mounted base for attaching multiple luggage accessories.

Features:

• PALS webbing front panel for attaching NOMAD accessories.
• Durable, weatherproof 600D polyester construction.
• x4 adjustable fitting straps.
• D-ring webbing attachment points.
• Hypalon® protection tabs.
• Designed for enduro and adventure bikes.

The Oxford Nomad Adventure Harness is a MOLLE-compatible, universal saddle-mounted base for attaching multiple luggage accessories.

Features:

• PALS webbing front panel for attaching NOMAD accessories.
• Durable, weatherproof 600D polyester construction.
• x4 adjustable fitting straps.
• D-ring webbing attachment points.
• Hypalon® protection tabs.
• Designed for enduro and adventure bikes.

The Oxford Nomad Bottlestash XL is designed to carry two containers; both the Oxford Fuel Flask and the Oxford Aqua Insulated Flask.

Features:

• Durable 600D Polyester construction with weatherproof backing.
• x4 adjustable fitting straps.
• x2 adjustable loops to keep containers secure.
• Designed to hold drink and fuel bottles.
• Removable internal divider.
• Drain holes to prevent water build-up in wet conditions.

Upgrade your adventure setup with the Oxford Nomad Kit. For riders who need versatile storage on the go, this kit offers secure, easy- access mounting with modular expandability.

Kit contains:

• Oxford Nomad Tank Harness (1x)
• Oxford Nomad N2 Utility Pouch (2x)

Upgrade your adventure setup with the Oxford Nomad Kit. For riders who need versatile storage on the go, this kit offers secure, easy- access mounting with modular expandability.

Kit contains:

• Oxford Nomad Tank Harness (1x)
• Oxford Nomad N1 Utility Pouch (2x)

Upgrade your adventure setup with the Oxford Nomad Kit. For riders who need versatile storage on the go, this kit offers secure, easy- access mounting with modular expandability.

Kit contains:

• Oxford Nomad Adventure Harness (1x)
• Oxford Nomad N9 Drop Sack (2x)

The Oxford Nomad 1L Utility Pouch is a small multi-functional carrier ideal for frequently accessed items such as a phone, multi-tool, keys, and wallet.

Features:

• 1L maximum capacity
• PALS webbing rear panel for attaching NOMAD accessories.
• Durable, weatherproof 600D polyester construction.
• Adjustable strap and D-ring attachment points.
• Converts to a leg bag and cross-body bag.

The Oxford Nomad 2L Utility Pouch is a multi-functional carrier designed for items such as puncture repair, first aid kits and tools.

Features:

• 2L maximum capacity.
• PALS webbing rear panel for attaching NOMAD accessories.
• Durable, weatherproof 600D polyester construction.
• x2 zipped pockets.
• x2 easy-access front pouches.
• Converts to a waist bag and cross-body bag.

The Oxford Nomad Cool Bag is an adjustable carrier with an insulated liner to help keep your food and drinks cool.

Features:

• 3L maximum capacity.
• Durable 600D Polyester construction with weatherproof backing.
• Shoulder strap included.
• Padded construction for extra protection.
• · Insulated liner to help keep contents cool.

The Oxford NOMAD 4L Utility Pouch is a multi-functional carrier designed for larger items. With a front webbing panel, this also acts as a secondary mounting point for other Oxford Nomad accessories.

Features:

• 4L maximum capacity.
• Durable, weatherproof 600D polyester construction.
• Padded construction for extra protection.
• x2 side carry handles.
• x2 zipped pockets.
• Supplied with 2 D-ring straps.

The Oxford Nomad Tank Harness is a universal tank-mounted base for attaching luggage accessories. Designed to surround the fuel cap, it is not necessary to remove whilst refuelling.

Features:

• PALS webbing front panel for attaching NOMAD accessories.
• Durable, weatherproof 600D polyester construction.
• Retains access to fuel cap.
• G-hook attachment points.
• Quick release adjustable fitting straps.

Oxford's Oil Filter Wrench Strap is ideal for removing oil filters that have a diameter between 50-120mm?. By wrapping the strap around the oil filter and creating a tight fit, the torque from the applied pressure on the wrench helps to gradually loosen the oil filter.

Features:

• Fits oil filters 50-120mm.
• One-handed operation.
• Durable steel construction.
• Reinforced rubber strap.
• Non-slip and fully adjustable strap.
• Corrosion resistant handle.

Spare right-hand grip for HotGrips™ original.

A universal gel tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or billions.

Features:

• Raised gel protects paintwork.
• Universal design.
• Can be cut to fit the smallest tank.
• Weather-resistant.

A universal gel tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or billions.

Features:

• Raised gel protects paintwork.
• Universal design.
• Can be cut to fit the smallest tank.
• Weather-resistant.

The Oximiser 3X is an advanced battery management system.

The Oximiser 3X is Oxford's most versatile, most powerful, multi-purpose maintenance product. It offers not one, but THREE automated charging programs for differing battery sizes - perfect for bikes, cars and even leisure batteries! So, if you have multiple toys in your garage, it's the only battery optimiser you are ever likely to need.

Features

• Completely redesigned and tested in the UK using top-quality long-life components.
• A 2-year warranty is included as standard.
• A soft-start charging mode to improve recovery of deeply discharged batteries as low as 8 volts.
• Intelligent charging will cycle-charge in an attempt to recover sulphated batteries.
• Suitable for all 12V automotive batteries including LITHIUM LiFePO4 motorcycle batteries.
• New voltage sensors quickly detect high current drain and will automatically revert to the most appropriate charge rate.
• Fast and efficient charging in all modes keeps charge times short and reduces main power consumption.
• Soft touch rubberised case for improved grip and ruggedness.
• Up to 3.6 Amps charging power for batteries up to 125Ah capacity.
• Induction cooling.
• Three charging mode power options.

Three Charging mode power options:

• Motorbike - 14.4V / 0.8A , for batteries under 36Ah including LiFePO4
• Car - 14.4V / 3.6A , a common charge rate for lead Acid, MF, GEL and LiFePO4 batteries
• Winter- 14.7V / 3.6A, suitable for AGM batteries including stop/start technology. Especially useful for charging batteries in freezing weather.

8-Stage Automatic Battery Management:

• Polarity Check
  • Checks the battery leads have been connected correctly.
• Battery Analysis
  • Assesses battery and determines the best charging method.
• Soft Start Charge
  • Controlled build-up of charge current ensuring discharged batteries are charged safely.
• Bulk Fast Charge
  • Charges at a fast rate to bring the battery to approximately 85% capacity.
• Absorption Charge
  • Lowers the charge rate and gives a topping charge to ensure the battery is charged to 100%.
• Voltage Check
  • Hourly voltage checks assess battery health.
• Battery Condition
  • LED lights indicate a weak or strong battery.
• Maintain Mode
  • Applies an appropriate charge if voltage drops outside acceptable limits to ensure the battery voltage and condition remain perfect.

The Oximiser 900 is an essential battery management system designed specifically for smaller batteries such as those used on motorcycles and ATVs.

Attach to your battery and it will charge until the battery has reached full capacity thereafter ensure it is kept in tip-top condition. If the battery is deeply discharged it will recover it with a varying charge rate and then it never drops below the critical voltage level of 12.6V. The digital displays and battery level indicators keep you informed every step of the way. They are suitable for a variety of vehicle batteries.

A professional switch mode charger designed to automatically maintain, optimise and prolong the life of a 12-volt battery. It can be left permanently connected to provide guaranteed long-term battery care. Heavily discharged batteries as low as 4.1V can be charged if the battery is not damaged.

Features:

• Easy-to-read LCD display.
• Quick check battery level indicator.
• Shows charging activity.
• Provides up to 900mA charging power.
• Battery voltage meter.
• Checks for correct polarity.
• Ideal for batteries up to 30Ah capacity including AGM, MF, and all lead acid types.

6 Stage battery management system

• Polarity check:
  • Checks the battery leads have been connected correctly.
• Battery Analysis:
  • Assesses battery and determines the best charging method.
• Bulk Fast Charge:
  • Charges at a fast rate to bring the battery to approximately 85% capacity.
• Absorption Charge:
  • Lowers the charge rate and gives a topping charge to ensure the battery is charged to 100%.
• Voltage Check:
  • Hourly voltage checks assess battery health.
• Maintain Mode:
  • Automatically applies an appropriate charge if voltage drops outside acceptable limits to ensure the battery voltage and condition remain perfect.

Accessories included in box

• M6 fused leads for permanent connection and has a weather-resistant cap.
• A set of crocodile clips for bench charging.
• A wall bracket.

Oxford crocodile clips accessory lead adapter allows an Oxford charger to be connected to a set of crocodile clips for attachment to a battery.

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 1250 charges a range of 6 and 12V batteries at a maximum charge rate of 1300mA (1.3Amps). The intelligent 8-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Compatible with WET/MF, AGM, GEL and LiFePO4 batteries, each charging program is tailored to the selected battery type. A desulfation stage repairs damaged batteries automatically during the charging profile, bringing them back to life (not LiFePO4).

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated - indoor and outdoor use.
• 8 stage automatic charging: polarity test, analyse, desulfation (12V WET/MF, AGM, GEL), soft start mode, bulk mode, absorption mode, voltage check, maintain mode (float voltage).
• AH Capacity: 3.5AH - 40AH.
• Compatible with: 6V and 12V WET/MF, AGM, GEL and 12V LiFePO4 batteries.
• Max output 1300mA.
• LCD display: clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for increased ventilation around the Oximiser casing.
• Waterproof cable exit with cable strain relief.
• Winter-grade cable.
• Removable hanger: easy to use, clip in and turn to hold the hanger in place.

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 5000 charges a range of 12V batteries at a maximum charge rate of 5000mA (5Amps). The intelligent 8-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Compatible with WET/MF, AGM, GEL and LiFePO4 batteries, each charging program is tailored to the selected battery type. A desulfation stage repairs damaged batteries automatically during the charging profile, bringing them back to life (not LiFePO4).

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated - indoor and outdoor use.
• 8-stage automatic charging: polarity test, analyse, desulfation (12V WET/MF, AGM, GEL), soft start mode, bulk mode, absorption mode, voltage check, maintain mode (float voltage).
• AH Capacity: 20AH - 120AH.
• Compatible with: 12V WET/MF, AGM, GEL and LiFePO4 batteries.
• Max output 5000mA.
• LCD display: clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for increased ventilation around the Oximiser casing.
• Waterproof cable exit with cable strain relief.
• Winter-grade cable.
• Removable hanger: easy to use, clip in and turn to hold the hanger in place.

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oximiser Pro 900 charges 6 and 12V WET/MF batteries at a maximum charge rate of 800mA (0.8Amps). The intelligent 7-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode - extending the life of the battery.

Suitable for use in any environment, the Oximiser Pro's high-impact, fire- resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

Features:

• Weatherproof IP65 rated – suitable for indoor and outdoor use.
• 7-stage automatic charging: polarity test, analyse, soft start mode, bulk mode, absorption mode, voltage check, and maintain mode (float voltage).
• AH Capacity: 3.5AH - 20AH
• Compatible with 6V and 12V WET/MF batteries.
• Maximum output: 800mA
• LCD display provides clear and easy-to-read battery charging information.
• High-impact, fire-resistant ABS casing.
• Rear-fitted rubber feet for improved ventilation around the Oximiser casing.
• Waterproof cable exit with strain relief.
• Winter-grade cable.
• Removable hanger: clip-in and turn to hold securely in place.

The Oxford SAE adapter allows you to connect your Oximiser to a USA-style SAE connector.

An extremely versatile set of panniers which provide a huge 50 litres of storage. Suitable for almost any bike, but perfect for naked bikes, tourers and sports tourers and for those that need a lot of flexibility in their luggage. These panniers come with all the necessary attachment equipment for a wide variety of bikes and are great for use with pillion riders.

Key Features
• 50 litre capacity
• Lifetime guarantee against faulty materials or manufacture
• Expandable for bulkier items
• Shoulder strap
• Elasticated external net for extra storage
• Internal net pocket
• Heat resistant base in case of momentary contact with the exhaust
• Large top opening and 360 degree opening zips for easy access to contents
• Rubberised side panel helps to protect the paintwork
• 7 Point secure fitting system
• Made from a tough Ripstop nylon
• Waterproof liner system (removable)

Size: 32cm (H) x 23cm (W) x 48cm (D)

To protect your paintwork, cut your own shapes to best suit your bike from this large clear adhesive sheet which comes complete with cutter guides.

Features:

• Cut-your-own Protectors
• Protect your paintwork against accidental knocks or rubbing caused by clothing, buckles, luggage systems, or pillion.
• This large sheet comes complete with cutter guides so that you can form the shapes that best suit your bike
• Place in areas that are prone to knocks and scratches
• Sheet Size: 425mm x 665mm