Products

High-quality tie rod ends designed to work with original equipment tie rods.

Features:

• Rack kit contains tie rod end and shaft that connects to the steering rack as well as the outer tie rod end, boot and the required hardware for one side.
• Boot kit includes both right and left tie rod boots.

The RAM-B-252 marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252 is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).

Features:

• Features an 11mm hole designed to attach to the mirror frame of motorcycles
• Included B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

The RAM-B-349-1U includes an M10 x 1.5 pitch male thread connected to a 1" rubber ball. The diameter of the round flange is 14.3mm and the thread length is 10.5mm.

Specifications:

• Ball Size: B Size (1")
• Weight Capacity:
  • Standard Use: 2 lbs
  • Heavy-Duty Use: 1 lb
• Material: Marine-grade aluminum
• Packaging type: Poly Bag
• Weight: 0.07 lb

Note:

Compatible with the mirror sockets of BMW motorcycles.

The RAM-B-345 brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball centered. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. This mount is not compatible with the 2016 BMW R1200RT.

Features:

• Utilize your existing reservoir cover with this ball base for motorcycles; hardware included
• Compatible with any B size RAM® Mounts double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x4 M4 x 20mm Machine Screws
• x4 M4 x 30mm Machine Screws
• x4 M4 x 35mm Machine Screws
• x4 M4 Flat Washers
• x4 .188" Nylon Spacers

The RAM-B-230, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is ideal if your mount arm is just too short.

Features:

• The perfect adapter for connecting two B size RAM® Mounts double socket arms for extra extension or articulation
• Consists of two B size 1" RAM® rubber balls connected by a .75" length post
• Post is made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• PRODUCT DIMENSIONS: Overall Length: 2.54" (64.5mm)
• SOCKET-TO-SOCKET LENGTH: 1.75" (44.4mm)
• BALL SIZE: B Size (1", 25.4mm)

The RAM-B-201U-C consists of a long double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 6", this is the longest B size RAM^® double socket arm size and adds more reach to your favorite mounting solution. The easy to adjust knob allows for near-infinite adjustability for your connected device.

Features:

• Provides an extended reach with an overall length of 6" and a socket-to-socket length of 5.31"
• Attaches to any B size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• PRODUCT DIMENSIONS: Overall Length: 6" (152.4mm)
• SOCKET-TO-SOCKET LENGTH: 5.31" (134.8mm)
• BALL SIZE: B Size (1", 25.4mm)

Ideal for motorcycle handlebars, the RAM-B-231ZU consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the U-bolt as well as a composite adapter that can narrow the rail to a minimum width of 0.5".

Features:

• Zinc-coated metal U-bolt base with 1" rubber ball is designed to sit at right angles to mounting rail; includes black cover caps for exposed ends of the U-bolt
• Compatible with any B size RAM® Mounts component; ball and socket technology allows for near-infinite adjustability
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• CLAMP RANGE: 0.5" (12.7mm) - 1.25" (31.7mm)diameter
• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x1 1/4"-20 U-Bolt for 0.5" - 1" Rails
• x1 1/4"-20 U-Bolt for 1" - 1.25" Rails
• x2 1/4"-20 Nylock Nuts
• x2 Rubber Caps
• x1 U-Bolt Spacer

The RAM locking knob, includes a brass 1/4"-20 thread, for 1" (B size) socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.

Hardware Included:

• x2 Keys

Assembly kit for Ram Mirrors. Without ball.

Assembly kit for Ram Mirrors. Without ball.

The RAM-B-346 base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.

Features:

• Fits over your motorcycle's existing brake/clutch reservoir cover; includes set of M4 x 35, M4 x 30, and M4 x 20 screws
• Included B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x4 M4 x 20mm Machine Screws
• x4 M4 x 30mm Machine Screws
• x4 M4 x 35mm Machine Screws
• x4 M4 Flat Washers
• x4 .188" Nylon Spacers

The RAP-S-KNOB3U consists of a 1/4"-20 female threaded security knob and key knob. The RAP-S-KNOB3U replaces all knobs on 1" diameter B size arms and mounts. The RAP-S-KNOB3U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB3U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-KNOB3U is the perfect accessory for keeping your mounted electronic device safe from theft and tampering.

Features:

• Keep your devices and mounting system safe from theft and tampering with this 1/4"-20 female threaded security knob
• Replaces standard knobs on 1" B size RAM® double socket arms
• Made of high-strength composites and steel for durability and reliability in the most demanding environments

Hardware Included:

• x1 RAM Pin-Lock Security Key

The RAM^® Magnetic Power Plate^™ III is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets, a composite cradle, and one adhesive metal plate. To mount your device to the magnet, you will need to attach the metal plate to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm metal plate with adhesive back.

Features:

• Designed to hold a range of devices including radar detectors; rectangular metal plate attaches to the back of your device
• Magnetic plate features adhesive, two powerful magnets, and cradle
• Made of high-strength composites for durability and reliability in the most demanding environments

Specifications:

• HOLE PATTERN: 4-Hole AMPS: 1.181" (29.9mm) x 1.496" (37.9mm)
• PLATE SIZE: 3.13" (79.5mm) x 4" (101.6mm)

Hardware Included:

• x1 50mm x 38mm Steel Adhesive Plate
• x2 Rare Earth Magnets
• x4 #6-32 x 1/2" Machine Screws
• x4 #6-32 Nylock Nuts

The RAP-B-379-HA1U consists of a 1/4"-20 X 1" thread, connected to a 1" diameter ball, female blind barrel nut and nylon washer.

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x1 1/4"-20 x .87" Barrel Nut
• x1 0.77" Nylon Washer

The RAP-B-379U-252025 consists of a 1" diameter rubber ball connected to a 1/4"-20 x .25" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of these devices.

Features:

• RAM® Tough-Ball™ features a 1/4"-20 x .25" male threaded post for connection to a variety of devices
• Included B size 1" RAM® rubber balls allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of high-strength composites with stainless steel thread post for durability and reliability in the most demanding environments

Specifications:

• THREAD PITCH: 1/4"-20 x .25"
• BALL SIZE:B Size (1", 25.4mm)

The RAM® Tough-Claw is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The large version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from 1" to 2.2" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bicycles and motorcycles, or even on kayak rails and roll bars, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.

Features:

• Large version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from 1" to 2.2" in outer diameter; rubber pads provide stable gripping and protection of mounting surface
• Ideal mounting base for phones, tablets, cameras, rod holders, and much more; includes 1" B size rubber ball for attachment to RAM® double socket arms
• Made of high-strength, glass-filled nylon with corrosion-resistant, stainless steel hardware for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

Product Dimensions

• Overall Height: 5.94"
• Overall Width: 2.25"

Clamp Range: 1" - 2.2" Diameter

Ball Size: B Size (1")

Weight Capacity

• Standard Use: 2 Lbs
• Heavy-duty Use: 1 Lb
• Materials: High Strength Composite

Packaging Type: Poly Bag

Weight: 1.05 Lb

RAM offers a wide variety of motorcycle mounts. A great new addition to this already extensive product line is our new Twist and Tilt^™ base. Made of die cast marine grade aluminum, durability won’t be a concern. The patented rubber ball dampens shock and vibration helping to maintain the performance of the mounted device. Simple to use and install, this great little product is compatible with numerous 1” ball mount systems. Designed to be compact and discrete, the Twist and Turn^™ won’t take up a lot of space but will provide a world of mounting possibilities.

Specifications:

• BALL SIZE: B Size (1", 25.4mm)

Hardware Included:

• x1 M10-1.25 x 40mm Socket Head Cap Screw
• x1 M8-1.25 x 40mm Socket Head Cap Screw
• x2 M10-1.25 Hex Nuts
• x2 M8-1.25 Hex Nuts
• x1 M10-1.25 x 20mm Socket Head Cap Screw
• x1 M8-1.25 x 20mm Socket Head Cap Screw
• x3 M10 Tooth Lock Washers

The RAM Vibe-Safe Adapter for 2-Hole Holders (RAP-462NPT) is a vibration-damping accessory designed to protect electronic devices from a wide range of vibration frequencies. The RAM Vibe-Safe is based on an NPT connection point and boasts the versatility to rotate between portrait and landscape while keeping your device secure in rugged environments.

This adapter is compatible with most 2-Hole RAM Holders, including the RAM Quick-Grip, RAM Tough-Charge, RAM Quick-Charge, and RAM Form-Fit Holders. The RAM Vibe-Safe is only compatible with the metal diamond ball adapter (RAM-B-238U).

Features:

• RAM Vibe-Safe dampens a wide range of vibration frequencies
• NPT thread connection allows for rotation between portrait and landscape while remaining secure
• Compatible with RAM holders with 2-Hole AMPS hole pattern, and the metal diamond ball adapter (RAM-B-238U) for any B-size ball and socket mount
• Unique structure and thoughtfully designed with all industries in mind
• Backed by a lifetime warranty

HARDWARE INCLUDED

• (2) #10-32 x 7/16" Machine Screws
• (2) #8-32 x 1/2" Machine Screws
• (2) #8-32 Nylock Nuts

PRODUCT DIMENSIONS

• Overall Length: 3.38"
• Overall Width: 3"
• Overall Thickness: 1.36"

HOLE PATTERN

• 2-Hole AMPS: 1.912"

MATERIALS

• High strength composite

PACKAGING TYPE

• Retail Bag

WEIGHT

• 0.3 lb

ADDITIONAL INFORMATION

• A reduction in vibration does not guarantee full protection of the device. External immeasurable factors may cause damage to phones, cameras, and other devices while mounted in the RAM Vibe-Safe. National Products, Inc does not assume responsibility or liability for any such personal injury, death, or property damage. RAM mounts lifetime warranty is limited to RAM mounts and components. The warranty does not include any device mounted or attached to a RAM mount, such as a phone, GPS, camera, computer, or other device.

The RAM-B-174-UN7U consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, a double socket arm, and a universal X-Grip^® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip^® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs includes both standard and metric mounting bolts. The included X-Grip^® cradle has a clean and clever four-leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip^® cradle expands and contracts, allowing for a perfect custom fit for your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip^® is the cell phone cradle evolved. The X-Grip^® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Specifications:

• CLAMP RANGE: 0.5" (12.7mm) - 1.25" (31.7mm) diameter
• HOLDER DIMENSIONS: Width Range: 1.875" (47.6mm) - 3.25" (82.5mm), Depth Range: 0.875" (22.2mm) max
• SOCKET-TO-SOCKET LENGTH: 3" (76.2mm)
• BALL SIZE: B Size (1", 25.4mm)

Assembly Hardware Included:

• x1 Optional Tether
• x1 Glue Tube for Rubber Caps
• x2 M6 x 55mm Hex Bolts
• x2 #1/4-20 x 2" Hex Bolts
• x2 1/4"-20 x 2.5" Hex Bolts
• x2 1/2" Spacers
• x2 1/4" Split Lock Washers
• x1 1/4"-20 U-Bolt for .5" - 1" Rails
• x1 1/4"-20 U-Bolt for 1" - 1.25" Rails
• x2 1/4"-20 Nylock Nuts
• x2 Rubber Caps
• x1 U-Bolt Spacer

The RAM-HOL-UN7-400U consists of the small Tough-Claw^™ base and universal X-Grip^® cradle. The X-Grip^® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip^® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The X-Grip^® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Features:

• Small version of the RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface
• Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use
• Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments

Specifications:

• HOLDER DIMENSIONS:Width Range: 1.75" (44.4mm) - 3.25"(82.5mm), Depth Range: 0.875" (22.2mm)max
• CLAMP RANGE: 0.625" (15.8mm) - 1.14" (28.9mm) diameter
• BALL SIZE: RAM Snap-Link (3/4")

Hardware Included:

• x1 Optional Tether
• x1 Glue Tube for Rubber Caps

250ML ENERGY DRINK

250ML TROPICAL EDITION

473ML ENERGY DRINK

250ML SUGAR FREE (SLAB OF 24)

250ML RED EDITION (WATERMELON) (ORDER 12 = 1 SLAB)

330ML ENERGY DRINK BOTTLE (ORDER 24 = 1 CASE)

High-quality park hand brake cable from All Balls.

Features:

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird caged prior to terminal casting for superior pull-out resistance.
• EPDM molded rubber components for high UV resistance and long life.
• Injected molded components are manufactured from high strength POM material.

High-quality park hand brake cable from All Balls.

Features:

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird caged prior to terminal casting for superior pull-out resistance.
• EPDM molded rubber components for high UV resistance and long life.
• Injected molded components are manufactured from high strength POM material.

High-quality park hand brake cable from All Balls.

Features:

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird caged prior to terminal casting for superior pull-out resistance.
• EPDM molded rubber components for high UV resistance and long life.
• Injected molded components are manufactured from high strength POM material.

High-quality park hand brake cable from All Balls.

Features:

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird caged prior to terminal casting for superior pull-out resistance.
• EPDM molded rubber components for high UV resistance and long life.
• Injected molded components are manufactured from high strength POM material.