HARD PARTS

High-quality power shift control motor. Please refer to image and fitment guide for correct fitment and ensure replacement matches original before fitting.

Features:

• Constructed using long-life brushes and bearings for smooth and accurate shifting.
• Direct OEM fitment for easy installation.
• Fully sealed construction ensures long life in harsh conditions.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

Quality pair of fork oil seals from All Balls Racing.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual-sealing lips guarantee oil stays in and dirt stays out.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

An economical way to reseal a leaky carburettor.

Features:

• Includes one gasket per kit (Multi carburettor bikes will require multiple kits).
• Applications that use paper float bowl gaskets are upgraded to high-performance interface gasket material.
• NBR rubber is used for gaskets (NBR has excellent resistance to ethanol used in today's fuels.)

All Balls replacement shock bumper, constructed from a stiffer rubber All Balls shock bumpers provide a brilliant fit & better feel when your shock bottomed out.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

Take your bike to the next level with the new Motobatt Pro Lithium! Super compact and powerful, this battery delivers instant starting performance while shedding weight compared to traditional lead-acid options. Built with advanced lithium technology, it offers longer life, faster charging, and consistent power delivery. Perfect for riders who demand reliability and performance, the Motobatt Pro Lithium keeps you riding stronger, longer.

Features:

• Integrated LED indicator shows voltage and charge percentage in real time.
• High power with Cell Balancing Circuit (CBC) and Protection Circuit Board (PCB).
• Ultra-lightweight design for maximum performance.
• Ideal for racing and high-performance motorcycles.

Specifications:

• LWH: 114x70x81.5mm
• Capacity (Ah): 4.0Ah
• Cranking (CA): 320A
• Energy (Wh): 48.0Wh

Carburetor repair kits
• Kits include all of the necessary components to repair a carburetor. ATV models with two carburetors include components to repair two carburetors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material.
• Components included in the kits are based off of US models and discretion must be used when attempting to install the kit on a non US model.
• Off road use only.

Fuel pump strainers act as a first line of defence against fuel system contamination. Strainers filter out common contaminants found in gasoline such as dirt, dust and other particulate matter, as well as gasoline varnish. Quantum fuel pump strainers feature multiple layers of strainer media to filter progressively smaller particle sizes. The expanded surface area provides enhanced filtration, extending the life of the fuel pump.

Restricted fuel flow through a clogged strainer causes the fuel pump to work harder, reducing pump longevity. Strainer clogging is among the top causes of fuel pump failure making it important to replace your strainer regularly - before problems arise. We recommend replacing fuel pump strainers in powersports applications once a year as part of a preventative maintenance plan.

Features:

• Designed with gradient density to meet or exceed OE specifications.
• Designed to ensure optimal filtration to prevent fuel system contamination.
• Strainer material tested and validated for capacity and efficiency by accredited third party.

K&N off-road replacement air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion even at high altitude. Generally, no jet changes are required with just a K&N filter element. K&N replacement air filters are washable and reusable and provide high air flow with excellent filtration.

Features:

• Designed to provide increased horsepower and acceleration.
• Specifically developed for Off-Road, Motocross, ATVs, UTVs and Side by Sides.
• Pleated cotton media provides a large filtration area offering low restriction, high-capacity and long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Fits directly into OEM air box with an application-specific sealing bead ensuring a precise fit.
• No fuel management modifications are required to obtain increased performance.
• Washable and reusable, most are pre-oiled and ready to ride.

Specifications

• Washab le: Yes
• Filter Material: Cotton Gauze
• Height: 116mm
• Inside Length: 132mm
• Inside Width: 34mm
• Outside Length: 194mm
• Outside Width: 83mm
• Filter Re-Oiling Amount: 17ml

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Heigh t: 1in (25mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Outside Length: 10.563in (268mm)
• Outside Width: 9.875in (251mm)
• Filter Re-Oiling Amount: 1.26oz (37ml)

New and Updated AB8 ATV CV/AXLE Shaft
Now improved with stronger 8 Ball design.

- 40% stronger than OEM
- Larger 4340 chrome-moly steel axle bar
- Precision ground components
- Low profile clamps
- Neoprene boots
- Engineered in the USA
- MFG. in an ISO facility
- Assembled with 3% moly grease
- New Improved and Stronger 8 Ball Joint

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

• Precision machined from high-grade 304 Stainless Steel.
• Stainless steel reduces thermal conductivity by up to 93% compared to aluminium.
• Plastic composite pistons are prone to damage and become brittle with age.
• OEM chrome-plated steel and aluminium pistons are prone to corrosion.
• Eliminates failure prone ceramic inserts found on some KTM models.
• Each kit contains piston or pistons to rebuild one caliper.
• Fits:
  • Can-Am Commander 1000 Limited 2019 - 2020
  • Can-Am Commander 1000 Max DPS 2015
  • Can-Am Commander 1000 Max Limited 2015 - 2018
  • Can-Am Commander 1000 Max XT 2015 - 2018
  • Can-Am Commander 1000 XT 2019 - 2020
  • Can-Am Maverick X DS Turbo 2016
  • Can-Am Maverick X MR 2015 - 2017
  • Suzuki DR650RS 1990 - 1993
  • Yamaha WOLVERINE RMAX2 1000 XTR 2021 - 2022
  • Yamaha WOLVERINE RMAX4 1000 XTR 2021 - 2022
  • Yamaha XT600 1990 - 1995
  • Yamaha YXC700 VIKING VI 2022
  • Yamaha YXE850 WOLVERINE X2 XT-R 2022
  • Yamaha YXF850 WOLVERINE X4 XT-R 2022
  • Yamaha YXM700P VIKING 2018 - 2022
  • Yamaha YXZ1000R 2016 - 2018
  • Yamaha YXZ1000R SS SE 2018

KoubaLink specialises in motorcycle lowering and performance linkages for off-road and dual-sport rear suspension systems. Compromise is not an option at KoubaLink. Listening to riders from all over the world explain where and how they use their off-road and dual-sport bikes. With their input, Koubalink manufacture products that add to your motorcycling experience and make it a little more enjoyable.

Features:

• Provides better front-end stability by lowering rear suspension geometry.
• Machined from billet aluminium.
• Stronger than OEM.
• Pre-installed OE style bearings included.
• Replace linkage like its OEM.
• Includes all required bearings and seals for assembly (Excluding Dog Bone styled linkages that do not include bearings and seals from factory).

Brand new aftermarket Voltage Regulator Rectifier

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• No assembly required
• Higher grade of electric components
• The quality exceeds the OEM equipment
• All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and are a major cause of repetitive electrical issues.

Specifications:

Dimensions: p>

• Width: 100 mm
• Length: 110 mm
• Height: 33 mm
• Wires length: 260 mm
• Distance between fixation holes center to center: 80 mm

Other specifications:

• Number of plugs: 2
• Number of pins: 5
• Number of wires: 5
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust and protects axles from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defence, shielding vulnerable joints and preventing leaks. High-performance molybdenum grease reduces heat and friction.

In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Neoprene boots.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.
• Engineered in the USA.
• Manufactured in an ISO facility.Assembled with 3% molybdenum grease.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

CK - Fibre Kits: Original Equipment quality anti-swell, cork-based, asbestos- free clutch plates. Packed in engine sets.
RK - Complete Kits: Dirt Racer Clutch sets are a complete set of CK series heavy duty cork-based, lined plates, plus heavy duty clutch springs & steel separator plates. Many off road machines have aluminium alloy separator plates fitted from new which wear out quickly
& cause premature clutch slip. The steel units in the DRC kits prevent this & re-establish clutch stack height. PBPSK - complete kits: These complete kits include Kevlar fibre lined friction plates, steel separator plates and springs to provide a street going kit for high performance street and road race use much similar to the DRC program for off road. Some of the kits will now feature new DIAPHRAGM springs as used in many larger new bikes to provide a complete clutch rebuild kit for every sport bike possible.
CSK - Spring Kits: (10% heavier than standard springs). CC_EP - Extra Plate Clutch Kits:Premier ‘EP' kits are built withUS Made Dupont Kevlar fi Original Equipment Quality anti-swell cork-based asbestos free clutch plate sets. Packed in engine sets. CK Series Clutch Kit

CK OE Quality anti- swell cork-based asbestos free clutch plate sets.
Packed in engine sets.

Aluminium weighted bar end for standard 22mm diameter handlebars.

Features:

• Made from CNC aluminium
• Includes 5mm hex key

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.