HARD PARTS

Hot Cams Steel Valves are designed as OEM replacements, precision-forged they are strong & durable. Machined head and seat surfaces provide a precise fit. Hot Cams valves are nitride coated and induction hardened valve stem tip provide longevity while a precision polished surface reduces friction resulting in less heat build-up. Hot Cams valves are compatible with all OEM valve keepers and are sold individually allowing you to keep your replacement costs down.

• Forged one-piece OEM replacement valves
• Precision machined valve head and seat surfaces
• Nitride coated
• Induction hardened valve stem tip
• Precision polished surface
• Compatible with OEM valve keepers
• Sold each

• Kit contains all of the components to re-seal leaking master cylinders
• Kit includes copper washers, spring, snap ring, replacement screws where applicable, cup seals, boot, and O-rings
• Applications:
  • Kawasaki H2 SX 18-20
  • Kawasaki H2 SX SE + 21
  • Kawasaki Z H2 20-22
  • Kawasaki Z H2 SE 21-22

Quality start engine switch for Kawasaki models KX/KXF 250 2021, KX450 2020, KXF450 2019-21.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

Custom fitting OEM-style stators

Direct plug-in stators complete with all rubbers and OEM-style plug end.

This item fits the following applications: Suzuki LTR450 QuadRacer 06-09

If you've installed or are looking at installing LED indicators you may need a load equaliser, LEDs draw less power than standard bulbs which can cause the LEDs to flash out of sequence. The equaliser is installed in parallel with the LED lamp and regulates the flashing speed, no special tools are required for installation. When installing the equaliser, note that they can get very hot so we recommend installing them in a well-ventilated area away from any plastics, fabrics and painted surfaces.

Simulates regular indication when LEDs are installed
Installs parallel with LED lamps
No special tools required for installation
For use with most Kawasaki motorcycles
Sold as a pair

NOTE: Equalisers can get very hot when in use, we recommend installing them in a well-ventilated area away from any plastics, fabrics and painted surfaces.

The Eurogrip Roadhound is an advanced radial tyre with zero-degree steel belt for high precision and high-performance riding. A well-balanced tyre with optimum grip, mileage and durability. Widely spread grooves for superior wet grip.

Features:

• Quadrazone dual compound technology on rear radial sizes, boosts grip and mileage even on the most powerful motorcycles
• High Silica Compound increasing grip on wet and cold asphalt
• Tread grooves geometry improves water drainage, mechanical grip and wear regularity
• Profile geometry, coupled with a dedicated 0° steel belt (on radial sizes), enhances handling and control also when travelling at high speed
• Structure materials and geometrical parameters provide great support even while carrying heavy loads

Technology:

Quadrazone

• Quadrazone compound technology features 4 zones of compound working together to ensure optimal dynamical performances and extended tyre durability
• The superficial layer has a dual compound setup (‘harder’ on the center increasing mileage and stability, ‘softer’ on the shoulders improving grip when leaning)
• The compounds touching the ground are connected to the inner structure by an additional layer which increase overall stability in every riding conditions
• Compound wings on the sidewall help reduce vibrations and heating

Tri-Polymer Tread Compound

• A special blend of Silica-rich fillers with High Structure Carbon plus additional fillers and reinforcements ensures that the chemical properties of our compounds are balanced for usage on both wet/low temperature and dry/high- temperature tarmacs. The mixing of these components undergoes several carefully monitored tests in our advanced laboratories

Roll Balance Unique Structure

• Carcass cords parameters such as materials, density, stiffness and so on, are finely tuned to provide stability, comfort and shape even when riding at high speed and loaded motorcycles (such as highway travelling with passenger and/or cargo). This careful selection ensures a pleasant travelling experience even in the more severe conditions

Optimised Tread Pattern

• FEA-aided tread pattern and contact patch optimization, ensuring even pressure distribution and optimal grooves/rubber ratio under footprint at all leaning angles.
• This technology allows for increased grip, water dispersal and compound wearing resistance, empowering the rider’s experience

0° steel belt (on radial sizes)

• Zero-degree steel belt technology promotes excellent dynamical performances when riding at high speed, by ensuring the tyre retains its optimal profile even when subjected to high magnitude external forces. This reduces self-righting effect and tyre heating, plus increases stability and trajectory precision

Specifications:

• E Mark: E11
• Front 55W TL

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

Constructed using a specific heat-treatment to ensure hardness for maximum durability and less wear and precision machined to match exact sizing requirements. Each size is sold individually as a pack of 5 to reduce costs when only requiring a particular size or restocking your valve shim pack.

Most 250cc 4-strokes use 7.48 mm OD shims, most 400cc and up 4-strokes use 9.48 mm OD shims, and KTM models use 10 or 8.90 mm OD shims.

Features:

• Heat-treated ensuring hardness for maximum durability and less wear.
• Precision machined to match exact size.
• Each size sold individually to keep cost down.
• Works with stock or aftermarket cams.
• Sold as a pack of 5.
• Sizes available:
  • 7.48mm x 1.20mm - 3.50mm in 0.05mm increments
  • 9.48mm x 1.20mm - 3.50mm in 0.05mm increments

All necessary parts to replace the fuel pump module.

Features:

• Includes complete module, retaining nut and gasket.
• Restores lost performance or non-functioning fuel pump with this economical solution.
• Pump draws less current than OEM counterpart while maintaining the same flow rate at working pressure, which reduces working temperatures and increases the life of the unit.

Note: Specific parts vary from kit to kit depending on the needs of your vehicle model.

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

The Whites 90-degree Alloy Valves are great for removing the hassle of trying to access hard to reach valves. Available in Black, Blue, Gold, Red or Silver these valves have a lightweight alloy construction that won't rust ensuring they don't cease when exposed to the elements.

Remedies hard to reach valves
Lightweight alloy construction
Anodised for additional durability
Size: 8.3mm
Colour: Red

Kit contains direct OEM replacement bearing assembly with all the required components.

• Shock-bearing assemblies are sold individually for the upper or lower position.
• Plastic moulded bushings upgraded to machined Delrin.
• Mild steel pins upgraded to case hardened and precision ground SCM415/42 bearing steel.
• Many times, OEM manufacturers do not sell the components separately from the shock absorber.
• Where possible and applicable, we have added an o-ring to the ID of Delrin machined bushings for superior water and dirt exclusion.

Trusted by riders and dealers in the automotive market, the Whites CV Axle proves its durability against the industry's top manufacturers. With oversized outer joints accommodating up to a 45° swing angle, it enhances suspension travel and robustness. Through the latest CNC manufacturing technologies, the inner joints allow up to 45° of movement. Enhanced by high-strength TPE boots, OTK clamps, and moly grease, it delivers optimal performance in harsh conditions, significantly extending axle lifespan.

• Up to 45° swing angle.
• Up to 45° travel on inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Please refer to our online fitment guide for regular additions to the range and specific fit for your model.

At over 7,500 lumens, the DENALI D7 light pod is one of the brightest LED lights under 4.5 inches period. The light pod features seven high-intensity 10 watt LEDs that are focused through a proprietary single-piece optic that was specifically engineered to create a full-bodied spot beam that can reach over 1200 feet at one lux.

Features:

• High-Intensity Series Cree LEDs outputting 7665 lumens per pair.
• TriOptic™ Multi-Beam Lens System includes a Spot, Flood and Hybrid beam option in one pair of pods.
• DataDim™ equipped light pods enable plug and play connection, and integrated dimming, with DENALI dimming and lighting controllers.
• DrySeal™ Submersible Waterproof light housings can withstand the most extreme environments.
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.
• LiveActive™ Thermal Management keeps the LEDs cool, preventing the loss of light output from overheating.
• Low-profile mounting bracket with stainless steel hardware included.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Including both the brake and clutch levers for your ride. With a wide blade design for additional comfort and a polished alloy finish for extra style.

Specifications:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.
• Polished finish.
• Includes both clutch and brake levers.

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

Each bike manufacturer uses different connectors for their indicators. This means that when fitting universal aftermarket indicators you need to cut the original connectors off and replace them with bullet fittings.

Not any more! Simply connect the IndyLeads between the original connector and the universal connector. Simple.

2 pack for front OR rear.

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB013
  • Outer: WPAXCVB014
• Please confirm suitability for your year, make, and model prior to purchase.

Whites comprehensive range of brake fittings accompanies the Whites Premade Brake Line. A multitude of parts ensures your braking requirements are met by Whites. Constructed using high-quality aluminium and steel the range includes banjos, line joiners, line tees and washers. Whites brake lines and parts improve braking feel and performance for your ride. Compliant to FMVSS106 and WOF/VIN regulations and used by NZSBK champion Andrew Stroud.

Comply to FMVSS106 and are WOF/ VIN Compliant
Used by NZSBK Champion Andrew Stroud
Improve Braking Feel and Performance
Steel construction ensures durability

Fitting Type: Banjo Bolt
Brake Line Size: 10mm
Banjo Size: 10mm x 1.25
Colour: Black Steel

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

A quality caliper rebuild kit from All Balls. Contains everything needed to rebuild your caliper to like new condition.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.