New Arrivals

Designed to protect your inner tube from tearing on the spoke nipples the Whites Rim Tape is the perfect OEM replacement. Made from high-quality rubber Whites Rim Tape is essential when installing new rims or perfect for replacing old damaged rim strips on your wheels.

High-quality rubber construction
Available for a range of wheel sizes
Packet of 10 perfect for the workshop
Perfect for new and old wheels
OEM replacement

Rim Size: 19in
Tape Width: 30mm
Quantity: 10

All Balls Fuel Pump Kits are designed to restore lost performance caused by a failing or non-functioning fuel pump. Each kit offers a plug-and-play solution for quick and easy replacement of your OEM fuel pump module.

Kit contents vary by application and may include components such as the pump, filter, hoses, clamps, and wiring harness. Some kits contain only core components like the pump and filter. Please refer to the product image and listing details for exact contents specific to your model.

Features:

• OEM replacement fuel pump kits.
• Plug-and-play installation.
• Contents vary by kit — check image and listing for details.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Whites Cable range is designed to meet and exceed OEM specifications and quality at affordable pricing. Including Throttle, Clutch, Brake (front, rear and hand) and Speedo cable for your common farming/trail machines.

Using a black vinyl housing and inner nylon sleeve for longer life and smooth operation the Whites Hand-Brake Cables are designed to be a long life replacement for your worn and degraded OEM cable. Providing accurate and consistent braking in all conditions. Whites have a comprehensive range of Hand-Brake Cables for most common agriculturally based quads.

Meets and exceed OEM quality cables
Black vinyl housing for cable protection
Inner nylon sleeve provides smooth operation and a long life
Designed to withstand the harsh life of a farm environment
Provides consistently accurate braking
Perfect fit for your four-wheeled machine

Whites extensive cable range specifically for agriculturally based quads.

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

K5 Series:

The K5 sintered compound is optimal for off-road motorcycles and ATVs. It is recommended for riders who demand great off-road stopping power and brake pad durability when riding on tough off-road terrains. The K5 series is designed for low abrasive interaction with the rotor, long life and self-cleaning capabilities necessary in off-road riding conditions. Friction materials contain metal-ceramic with a sophisticated bronze-graphite and full-metal mixture formulation with fine friction particles to achieve optimal friction properties.

Features:

• High static friction coefficient
• Good abrasive resistance
• Self-cleaning capability
• Low abrasive interaction with the brake rotor material
• Up to 3 times longer operational life compared to organic and Kevlar composite materials

Application:

• Developed specifically for off-road motorcycles & ATVs
• Can be used on both front and rear brakes
• Could be used on the rear brake of road racing motorcycles

Operating Parameters:

• Specific pressure: 2.0 Mpa
• Sliding velocity: 20 m/s
• Constant maximum temp: 500°C
• Short time maximum temp: 750°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Wossner is Germany's finest aftermarket forged piston and rod manufacturer and have over 25 years of experience in the high-performance racing industry. Top European racers and FIM World Champions rely on Wossner for only the best pistons, rods, and customer service.

Includes x2 10mm circlips.

These Spoke Kits are designed for riders seeking great value for their money. Made from cost-effective high-carbon steel, these spokes are paired with square OE-type steel nipples. This combination ensures that these spokes deliver both an affordable price and reliable performance.

Features:

• Economically priced.
• Excellent value and performance.
• High carbon steel spokes.
• Steel OE-type nipples.
• Replacement nipples and spokes are available.

Note:

Spokes are designed to fit Whites and MTX Rims only; however, they can be used with OE rims with modification to allow the wider nipple to fit.

Replacement Pinlock-ready shield for Leatt 8.5 / 9.5 ADV helmets.

Manufactured to meet or exceed OEM specifications the Whites Clutch Fibre Plates are designed as an OEM replacement. The fibres provide an excellent clutch feel and are a cost-efficient way of replacing your old, worn clutch fibres. Whites Clutch Fibre Plates provide complete compatibility with your OEM clutch components.

• OEM replacement part
• Built to meet or exceed OEM specifications
• Cost-effective clutch repair
• Requires 2 for a complete repair

NOTE: Only 1 Clutch Fibre Plate included; 2 are required along with 3 of the WCFXR190KTT for complete XR190CT clutch repair.

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

These piston kits ease the repair process by saving time and money. They come with everything needed to replace your piston, top-end gaskets, and wrist pin bearing (for two strokes) when the time comes.

Features:

• Included are the piston, rings, wrist pin, circlips, top end gaskets, and even wrist pin bearing (for two-stroke applications).
• Four-stroke kits include a free camchain.
• Case-hardened and highly wear-resistant wrist pins have anti-galling properties.

M6 10mm hex flange bolts are made from zinc plated 8.8 steel. Sold in bags of 10.

• Comprehensive kit for transmission rebuild, includes bearings, seals, o-rings, and shims.
• Affordable alternative to OEM replacement parts.
• Utilizes high-quality ABEC 3 precision ball bearings for durability and performance.
• Sourced components, including ball bearings, needle bearings, tapered bearings, PTFE lined bearings, seals, and o-rings, from reputable manufacturers worldwide.
• Kits with tapered bearings come with a selection of shims for customization.

Ideal replacement for dirt bikes.

Features:

• Anti-swell alloy impregnated heavy-duty cork-based facings.
• Smooth clutch take up compared to paper clutches, which can ‘snatch’.
• Steel separator plates increase flywheel effect of the engine and improve performance.

K&N Sealing Grease 99-0704 provides an airtight fit around sealing surfaces on all types of air filter elements. It resists heat and will not melt or run off. K&N Sealing Grease is designed to ensure the filter stays sealed in rugged environments. It is not to be used on clamp-on filter elements. K&N Sealing Grease 99-0704 comes in a 6-ounce (177.44 ml) tube.

Features:

• Seals air leaks between air filter components.
• Holds up to high temperature without breaking down.
• Designed for push-in, push-on and other non-clamp-on air filter seals.
• Grease is dispensed from a squeeze tube.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs.

• Ignition cover gasket
• Designed to fit O.E.M. cover

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Whites Brake Master Cylinders provide a good-quality and cost-effective solution when replacing your worn-out OEM unit(s).

Fitments are available to suit many popular motorcycles, ATVs and UTVs — use our Parts Finder/Fitment Guide to ensure suitability for your make, model, year.

Features:

• Direct bolt-in replacement when installed on models we list in our fitment finder.
• Cost-effective solution to replace your worn-out OEM unit(s).
• Master cylinders are model-specific; please ensure correct selection is made — adaptation and/or fitments beyond our listing could compromise braking performance.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

A quality ball Joint kit from All Balls Racing.

• Bearing cup is made from POM-M90 to isolate steel rod from housing.
• Comes with snap ring and cotter pin. Saves you lots over OEM!

Designed to meet or exceed OEM specifications, the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing.

Features:

• Premium high-speed bearings.
• Low drag.
• Double lip seals on both sides provide superior exclusion of water and dirt.
• Improved grease retention.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come. This 10 piece set is the perfect flywheel tool for your workshop, ensuring you have most of the market covered for engine servicing in one convenient kit.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish
Convenient carry case
10 piece kit providing 15 applications

Kit Includes:
M14 x 1.5
M16 x 1.5
M18 x 1.5
M19 x 1.0
M20 x 1.0
M22 x 1.0
M22 x 1.5
M24 x 1.0
M25 x 1.5
M26 x 1.0
M26 x 1.5
M27 x 1.0 (L/H Thread)
M27 x 1.25
M28 x 1.0
M28 x 1.5

All applications are right-hand threads excluding the M27 x 1.0 which is a left-hand thread.

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle. K&N drop-in Replacement Filter: s are designed to install easily into your factory airbox. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Features:

• Designed to increase horsepower.
• Washable, reusable, and engineered to last for the life of your vehicle.
• Designed to provide high airflow and exceptional filtration.
• Engineered to fit easily into your factory airbox.
• Only needs cleaning every 50,000 miles under normal highway driving conditions.

Specifications:

• Height 1.313in (33mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Outside Length: 10.25in (260mm)
• Outside Width: 6.5in (165mm)
• Filter Re-Oiling Amount: 0.73oz (22ml)

A quality ball Joint kit from All Balls Racing.

Features:

• Bearing cup is made from POM-M90 to isolate steel rod from housing.
• Comes with snap ring and cotter pin.
• Saves you lots over OEM.