New Arrivals

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

• The Quality exceeds the OEM equipment
• All products shipped are tested

Dimensions:

• Height: 68 mm
• Length:157 mm
• Width: 68 mm

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The next evolution of HotGrips® Pro.

In response to customer feedback, Oxford added two additional heat settings, making these ideal for riders tackling extreme winter temperatures with thick gloves.

Controlling the temperature is easy, simply press the button on the clutch-side grip and the multi-coloured LED light indicates the selected setting before dimming - to reduce distraction whilst driving.

Each grip houses its own internal temperature control unit, which independently measures and controls the heat of each grip using built- in thermistors to maintain the desired temperature setting.

Manufactured from silicone, this incredible material increases the grip‘s lifespan by up to 200% without compromising comfort or performance, as well as delivering cable strain improvement and enhanced grip levels.

Features:

• HotGrips® Pro 2.0 Touring features
  • Grip guaranteed - hex tread pattern for vibration absorption and durability; knurling tread pattern creates the largest surface area for maximum grip and control.
  • Customisable grips - Grip length of 125mm but can be trimmed to 120, 115mm if required, with open ends allowing bar end weights can be fitted.
• 5 smart heat settings: Red 55°C, Purple 50°C, Green 45°C, White 40°C, Blue 35°C
• The thermistor reacts to temperature changes in the environment and adjusts the heat output accordingly, maintaining the selected temperature setting.
• Integrated controller
  • The built-in controller allows the rider to effortlessly control the temperature of their Hotgrips® Pro without removing their hand from the grip.
  • Multi-coloured LED displays the chosen temperature setting and dims to avoid any distraction.
• Intelligent heat setting memory
  • The intelligent heat setting memory function stores the previous heat setting and defaults to this at power-up, saving time when in regular use.
• Battery saving modes
  • Protects against flat batteries, so if you forget to turn the switch off it will do it for you!
  • HotGrips® Pro offers an additional battery-saving mode for lithium batteries, now common on high-performance motorcycles.
• Waterproof construction
  • Fully waterproof connectors and integrated controller meet IP65 rating to protect your HotGrips® from the elements.
• Grip Features
  • Silicone-formed grips - increase grip lifespan by up to 200% without compromising comfort or performance.
  • Integrated cable strain relief - a more compact cable exit enables grip size to be reduced.
  • Fits 7/8" (22mm) ∅ handlebars.

Quality replacement Regulator/Rectifiers.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

The Hornet Wave keeps you out there at your best. Designed for performance.

Using Lightweight induction hardened stainless steel the Hornet Wave disc offers superior strength and durability while using MTX’s innovative technology to keep you in control under high stress braking. Constructed using one complete segment of SUS 420 stainless steel, then heat-treated to HRC 36+-2. MTX’s Wave technology ensures your discs stay cool through high strain environments.

All MTX discs are designed and manufactured with world-leading, cutting edge technologies:

• Precision CNC machined and laser-cut technology
• Japanese SUS 420 Stainless Steel
• Replacement for Original Equipment
• High Tech Wave perforated design
• Optimum heat dissipation

Specifications:

• O.D: 245mm
• I.D: 115mm
• Minimum Thickness: 3.5mm
• Rotor Position: Rear

All new assembly sold complete with Hot Rods connecting rod.

• The Hot Rods complete crankshaft includes their famed connecting rod; durability at a level OEM rods can only dream of.
• Factory assembled and trued to O.E.M. specifications, Hot Rods cranks will meet or surpass the OEM in performance. Hot Rods makes installing the complete crankshaft simple and easy.
• Crankshaft is completely rebuildable with genuine Hot Rods connecting rods.

Note: Crank bearings and seals sold separately.

Upgrade rubber bushings found in Utility ATV A-Arms to AB's redesigned HD Delrin bushings.

This kit is designed to replace worn-out rubber bushings and provides greater suspension travel and performance.

Quality design and construction of every All Balls piece meet the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

ALL BALLS CARBURETOR REBUILD KIT FOR RMZ250 2008-2009

Harness the flexibility and intelligence of your Harley-Davidson's CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart™ Controller. The ground-breaking Harley-Davidson CANbus controller provides plug & play connection and intelligent control of aftermarket and genuine Harley-Davidson accessories right from your bike's original switches or DENALI Accessory Manager Software.

Simply connect the CANsmart™ Controller to your Harley-Davidson diagnostic port to access over 35 programmable accessory settings that provide intelligent control of factory passing lamps, auxiliary lights, horns, brake lights, or any other accessory you can imagine. The four accessory circuits are electronically fused and can provide up to 25 peak amps (10 amps continuous).

The CANsmart H-D is compatible with over 60 Harley-Davidson models including all Sportster, Dyna, Softail, Touring, CVO, and Trike models from 2014 to present.

Features:
- High/Low Sync. Set passing lamps and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
- On/OFF and Dim. Independently control two sets of lights on/off and intensity level (for both day and night) right from your bikes factory trip switch. Click three times to turn lights on/off, or hold for 3 seconds to enter dimming mode where you can cycle between 10%-100% intensity.
- Modulate Lights. Set passing lamps or auxiliary lights to modulate to increase your visibility to other motorists.
- Flash to Pass. Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
- Cancel With Turn Signal. This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal
- Plug & Play Horn Installation. Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
- Strobe with Horn. With this feature selected the CANsmart™ will automatically strobe your passing lamps or auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
- Deceleration Activated "Smart Brake" Technology. The CANsmart™ reads vehicle speed in real time to activate your brake light during deceleration before you even touch the bake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
- Flash Pattern Braking. The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
- Compatible with Genuine Harley-Davidson Accessories. The CANsmart™ can provide "smart brake" and flash pattern braking to a wide variety of accessories including Harley-Davidson aftermarket LED brake lights.
- Switched Power Source. The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
- Delay Time Out. You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
- On Board Power. The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

What’s In The Box?
CANsmart™ Controller
2x 5.5ft Light Extension Cables
2x OEM Passing Lamp Wiring Adapters
5ft SoundBomb Horn Extension Cable
B6 Brake Like Wiring Adapter
Zip-ties
Adhesive Hook-and-Loop Fastener
Micro USB Programming Cable
CANsmart™ Accessory Manager Software

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

Wossner

For more than 35 years, Wössner successfully design and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Con Rod Kits

The Wössner 2-stroke connecting rods are always supplied with lifting pins, needle bearings, connecting rod bearings and spacers.
The Wössner 4-stroke connecting rods include crank pins and connecting rod bearings.
Please use our Fitments Tool to ensure the correct part is ordered.

The All Balls Brake Master Cylinder Re-build Kit contains all of the components required to re-furbish one master cylinder.

Kits contains:

• Copper washers
• replacement screws where applicable
• Cup seals
• O-rings
• Replacement piston

Kit Contains:
1x GF031S3 Front Brake Pads
1x GF191K5 Rear Brake Pads
1x PUTAFKT4226 Putoline Air Filter
1x PTAAFO1L Putoline Action Air Filter Oil (1L)
1x KNKN652 K&N Oil Filter

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

High Quality Air Cut Off Valve Kit from All Balls.

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

HFP-705 is a low pressure fuel pump used in many OMC, Volvo, Johnson, and Evinrude models. Quantum replacement fuel pumps, modules, assemblies, and kit components are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends. Each Quantum fuel pump and installation kit is backed by a lifetime free replacement warranty. If there is any issue of any kind at any time, give us a call or email us and we will replace the pump free of charge.

Features & Benefits

• OEM or better performance
• Coated corrosion-resistant case to minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

Wossner

For more than 35 years, Wössner successfully design and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Needle Bearings (Little End Bearings)

Please use our Fitments Tool to ensure the correct part is ordered.

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

Each bike manufacturer uses different connectors for their indicators. This means that when fitting universal aftermarket indicators you need to cut the original connectors off and replace them with bullet fittings.

Not any more! Simply connect the IndyLeads between the original connector and the universal connector. Simple.

2 pack for front OR rear.

2 spare device adaptors for the Oxford Cliqr mounting system

Additional device adaptors for those with multiple devices to mount

WEIGHT LIMIT: 2KG

ALL BALLS CARBURETOR REBUILD KIT FOR KVF700 PRAIRIE 2004-2006

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs.

• Inner clutch cover gasket
• Designed to fit O.E.M. cover

- Oil, chemical and temperature resistant
- Pre moulded cut lines (can be cut to size)
- Top quality 3m adhesive
- Protects paintwork
- Pack includes 2 grips

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

The K&N Drycharger^® is a silicone-treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron-sized openings that allow high airflow. Yet, due to the Drychargers silicone-treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited.

Features:

• This product wraps your air filter with an additional pre-filter.
• Extends service interval of your K&N filter.
• Durable silicone-treated polyester material with stitched elastic openings.
• Water repellent treatment typically lasts 1 to 2 years.