New Arrivals

High-quality park hand brake cable from All Balls.

Features:

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird caged prior to terminal casting for superior pull-out resistance.
• EPDM molded rubber components for high UV resistance and long life.
• Injected molded components are manufactured from high strength POM material.

Plug-and-play, aftermarket replacement CDI box for Yamaha outboard motors from RM Stator. Refer to fitment guide for models.

Dimensions:

• Width: 150mm
• Length: 156mm
• Height: 26mm
• Fixation holes, centre to centre: 143mm

Other specifications:

• Number of plugs: 2
• Number of pins: 12

Details:

• RM Stator's PeakRPM technology provides a more aggressive timing curve for increased throttle response
• Ride at full throttle with their application-specific CDI box that raises the rev limiter by 1000 RPM
• Enjoy fast and easy installation with their plug and play design and included dielectric connector grease
• OEM-grade electronic components and printed circuit boards for long-term reliability and performance
• 90% of ignition issues are caused by a faulty stator. Fully test ignition components before buying

All Balls now offers a complete fork bush kit solution. The kit includes the following products:

• 2x slider bushings
• 2x leg bushings
• All copper washers and O-rings, 2 fork seal snap rings.

Quality design and construction of every All Balls piece meets the toughest standards and conditions — from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Carburetor repair kits
• Kits include all of the necessary components to repair a carburetor. ATV models with two carburetors include components to repair two carburetors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material.
• Components included in the kits are based off of US models and discretion must be used when attempting to install the kit on a non US model.
• Off road use only.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Dimensions:

• Exterior diameter: 104mm
• Interior diameter: 42mm
• Thickness: 26mm

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.
4. There are 2 possible stators for the model's Triumph Speed Triple 1050 2005-2010: Refer to below:
• Speed Triple 1994 to 2018 This part will only fit Speed Triple with a VIN BETWEEN 141872 and 210444 and has a engine number HIGHER than 183487 or a VIN BETWEEN 210445 and 461331 and an engine number LOWER than 356142. If your vehicle has a VIN between 141872 and 210444 and with an engine number lower than 183486, refer to RM01387S. If your vehicle has a VIN between 210445 and 461331 and an engine number higher than 356143 or a VIN between 461332 and 735437, refer to RM01390. If your vehicle has a VIN lower than 141871, refer to RM01348.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

No-Toil Air Filters are built with the highest quality materials to ensure that they are long-lasting. Made with the finest dual-stage, flame-laminated foam to effectively stop dirt, and a high strength glue.

Features:

• No Toil manufactures the world's best 2-stage foam air filters.
• Using only the best flame-laminated dual-layer foam bonded with the highest quality glue, they hand-make each foam filter to stand up to the roughest and toughest of any style of riding or terrain.
• These filters, used with No-Toil foam filter oil, provide the best air filtration system in the world!

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

Manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Made of high-quality vulcanized rubber.
• Fits as well as OEM.
• Three to four times the life than OEM.

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100-decibel disc horn. Designed to be a direct Plug and Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections and can handle the 5 amp load. When stock isn't quite enough, be heard with the SoundBomb Mini.

Some motorcycle horn circuits are not capable of powering this 5 amp horn. If your horn circuits' max amperage is less than 5 amps, or if you are unsure, simply add the plug-n-play harness to bypass the horn circuit and draw power directly from your battery. Also, add a standard relay as this is not included with the horn harnesses.

Product Specs:

• 113 Decibels at 3 feet.
• Operating voltage:12 Volts (11.7 volts required).
• Power draw: 5 Amps
• Single piece design
• Dimensions: Approximately 3.25" x 3.4" x 2.5"
• Stylish all-black design.
• Fits in most factory horn locations.

Kit Contents:

• Single-piece electromagnetic horn.
• Mounting hardware.
• Fully illustrated Installation instructions.

Quality ATV Steel Rims from WMP.

Specifications:

• Rim Size: 12
• PCD: 4/156mm
• Offset: +12.7mm
• Inner Diameter: 290mm
• Load rating (per rim) 499kg

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

This heavy-duty ball joint kit is engineered for those who demand reliability and strength in their vehicle's components.

Features:

• Heavy-duty steel housing.
• POM-M90 bearing cup to isolate the ball end from the steel housing for longer life.
• Steel-on-steel design with an adjustable cap and a grease zerk.
• Adjustable end cap allows slop to be taken up as the ball joint wears.

Carburetor repair kits

• Kits include all of the necessary components to repair a carburetor. ATV models with two carburetors include components to repair two carburetors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material.
• Components included in the kits are based off of US models and discretion must be used when attempting to install the kit on a non US model.
• Off road use only.

For 100 years, Philips has been at the forefront of the automotive lighting industry, introducing technological innovations that have become standard on modern automobiles. Today, one in two cars in Europe and one in three worldwide is equipped with Philips lighting.

Nominal Voltage: 12 volts

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

A quality caliper rebuild kit from All Balls. Contains everything needed to rebuild your caliper to like new condition.

Brand new aftermarket stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest-grade lamination materials
• Highest-grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All products shipped are tested

Specifications:

Dimensions:

Other specifications:

• Number of wires: 5
• Number of plugs: 4
• Number of pins: 5
• Number of poles: 18

Wire-to-wire resistance:

• Alternator: White to White = 0.5 ohms +-20%
• Pickup: Black to Grey = 512 ohms +-20%

A quality caliper rebuild kit from All Balls. Contains everything needed to rebuild your caliper to like new condition.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets necessary to rebuild the water pump.
• Designed to fit O.E.M. water pump.

The Magnum is an ultra-strong U-lock. It boasts a high security, independently approved 16mm shackle lock with a hardened steel construction and has undergone rigorous testing, achieving Sold Secure GOLD, ART 4*, SBSC and FG certification.

The Magnum has a key replacement service. When you buy your Magnum, simply note down the number which comes attached to the keys on a metal tag. Keep this in a safe place, then in the event that you are unfortunate enough to lose all your keys, it will be possible to get a new key made up for you.

Features:

• Sold Secure Powered Cycle (Motorcycle) GOLD.
• 16mm shackle.
• Ultra-strong double locking mechanism.
• High-tech pick-resistant locking system.
• Saw, bolt cropper and drill resistant.
• 2 x keys
• Lock head dust cover.
• Dual use product.
• Comes with carry bracket for cycle use.
• 5-minute attack tested.
• 1.2m cable included (Duo model only). Use the U-lock to "lock" the bike to a fixed object (e.g. Oxford anchor, fence, lamp post, etc.) to prevent it from being ridden or pushed away. The cable can be used to secure the component parts such as wheels.

The Trail Stand is a lightweight, foldable support tool for servicing off-road and adventure motorcycles. It provides a secure third point of contact, allowing riders to lift their bikes on rough terrain. The stand folds down to a compact 25 cm (10 inches) and extends to 48 cm (19 inches), making it suitable for a wide variety of motorcycles. Its lightweight, foldable design allows for space-saving storage in the included zippered mesh bag, making it ideal for any adventure.

A special feature is the milled aluminium feet with silicone pads, which ensure maximum traction on loose surfaces. The feet pivot to maintain flat contact with the ground, increasing stability even on uneven terrain. The included Velcro strap secures the brake lever during repairs and prevents unwanted movement.

Features:

• Compact and portable: Folds down to 25 cm and includes a zippered mesh pocket for easy storage and transport.
• High-quality components: Made from 6061 aluminium with swivelling, silicone-coated feet for optimal grip.
• Swivelling feet: The feet swivel to ensure flat contact with the ground, even on uneven surfaces.
• Versatile application: Enables safe lifting on rocky or sloping terrain for dual-sport, adventure, and off-road motorcycles.
• Lightweight: Weighs only 283 grams (10 ounces) and fits perfectly into a saddlebag or backpack.
• Brake lock: The Velcro strap securely holds the brake lever and minimises movement during repairs.

Specifications:

• Folded length: 24.9 – 29.8 cm (9.8 – 11.8 inches)
• Extended length: 44.5 – 49.0 cm (17.5 – 19.3 inches)
• Weight: 283 g (10 ounces)
• Construction: Shaft made of 6061-T6 aluminium
• Foot design: Swivelling aluminium feet with silicone drive pads (removable for storage)
• Stability aid: Velcro strap for the brake lever included
• Storage: Mesh bag with zipper included
• Warranty: Trail Tech “Life of the Bike” warranty
• Compatibility: Dual-sport, adventure, and off-road motorcycles; for lifting the front or rear wheel