New Arrivals

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Filte r Material: Cotton Gauze
• Height: 33mm
• Width: 158mm
• Length: 227mm
• Filter Re-Oiling Amount: 20ml

The Magnum is an ultra-strong U-lock. It boasts a high security, independently approved 16mm shackle lock with a hardened steel construction and has undergone rigorous testing, achieving Sold Secure GOLD, ART 4*, SBSC and FG certification.

The Magnum has a key replacement service. When you buy your Magnum, simply note down the number which comes attached to the keys on a metal tag. Keep this in a safe place, then in the event that you are unfortunate enough to lose all your keys, it will be possible to get a new key made up for you.

Features:

• Sold Secure Powered Cycle (Motorcycle) GOLD.
• 16mm shackle.
• Ultra-strong double locking mechanism.
• High-tech pick-resistant locking system.
• Saw, bolt cropper and drill resistant.
• 2 x keys
• Lock head dust cover.
• Dual use product.
• Comes with carry bracket for cycle use.
• 5-minute attack tested.
• 1.2m cable included (Duo model only). Use the U-lock to "lock" the bike to a fixed object (e.g. Oxford anchor, fence, lamp post, etc.) to prevent it from being ridden or pushed away. The cable can be used to secure the component parts such as wheels.

The Trail Stand is a lightweight, foldable support tool for servicing off-road and adventure motorcycles. It provides a secure third point of contact, allowing riders to lift their bikes on rough terrain. The stand folds down to a compact 25 cm (10 inches) and extends to 48 cm (19 inches), making it suitable for a wide variety of motorcycles. Its lightweight, foldable design allows for space-saving storage in the included zippered mesh bag, making it ideal for any adventure.

A special feature is the milled aluminium feet with silicone pads, which ensure maximum traction on loose surfaces. The feet pivot to maintain flat contact with the ground, increasing stability even on uneven terrain. The included Velcro strap secures the brake lever during repairs and prevents unwanted movement.

Features:

• Compact and portable: Folds down to 25 cm and includes a zippered mesh pocket for easy storage and transport.
• High-quality components: Made from 6061 aluminium with swivelling, silicone-coated feet for optimal grip.
• Swivelling feet: The feet swivel to ensure flat contact with the ground, even on uneven surfaces.
• Versatile application: Enables safe lifting on rocky or sloping terrain for dual-sport, adventure, and off-road motorcycles.
• Lightweight: Weighs only 283 grams (10 ounces) and fits perfectly into a saddlebag or backpack.
• Brake lock: The Velcro strap securely holds the brake lever and minimises movement during repairs.

Specifications:

• Folded length: 24.9 – 29.8 cm (9.8 – 11.8 inches)
• Extended length: 44.5 – 49.0 cm (17.5 – 19.3 inches)
• Weight: 283 g (10 ounces)
• Construction: Shaft made of 6061-T6 aluminium
• Foot design: Swivelling aluminium feet with silicone drive pads (removable for storage)
• Stability aid: Velcro strap for the brake lever included
• Storage: Mesh bag with zipper included
• Warranty: Trail Tech “Life of the Bike” warranty
• Compatibility: Dual-sport, adventure, and off-road motorcycles; for lifting the front or rear wheel

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Short stem Rectangle Mini LED replacement indicators.

Features

• 9 super-bright LEDs
• Compact and stylish design
• Weatherproof
• Sealed-for-life for greater longevity
• Includes 2 resistors to control flash rate on most motorbikes
• Specification: 12V, 1W
• Instructions included
• E-marked for front and rear use
• M8 bolt - thread pitch 1.25mm
• Size: 74mm (L) x38mm (W) x 33mm (H)

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

Hot Cams Steel Valves are designed as OEM replacements, precision-forged they are strong & durable. Machined head and seat surfaces provide a precise fit. Hot Cams valves are nitride coated and induction hardened valve stem tip provide longevity while a precision polished surface reduces friction resulting in less heat build-up. Hot Cams valves are compatible with all OEM valve keepers and are sold individually allowing you to keep your replacement costs down.

• Forged one-piece OEM replacement valves
• Precision machined valve head and seat surfaces
• Nitride coated
• Induction hardened valve stem tip
• Precision polished surface
• Compatible with OEM valve keepers
• Sold each

Specifications:

• Material: Stainless Steel
• Valve Head Outer Diameter: 35mm
• Valve Length: 97mm
• Valve Stem Outer Diameter: 5.970mm

PAIR

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

- Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machines top performance
- Utilizes stock mounting hardware (not included) for a great fit
- Hand-welded aluminium design for a great look and functionality
- Includes a new radiator cap

Quality replacement components to rebuild one fuel tap. Improves service life and resistance to water and dirt.

Includes:

• Face screws
• Face gasket
• Wave washer
• Tank bolts
• Tank gasket
• O-rings

Whites Oil Filters are designed to trap harmful contaminants while still allowing a high oil flow rate.

Features:

• Designed for great filtration.
• Oil filter design provides for a high rate of oil flow.
• Filters available for almost all makes and models.

All necessary parts to replace the fuel pump module.

Features:

• Includes complete module, retaining nut and gasket.
• Restores lost performance or non-functioning fuel pump with this economical solution.
• Pump draws less current than OEM counterpart while maintaining the same flow rate at working pressure, which reduces working temperatures and increases the life of the unit.

Note: Specific parts vary from kit to kit depending on the needs of your vehicle model.

Maximise your motorcycles engine cleaning system with Whites Magnetic Oil Drain Plugs, available for almost every make & model of motorcycle these anodised aluminium plugs include a magnetic core that is designed to catch any metal shavings in your motorcycles oil. Extra protection can't hurt, a simple inexpensive magnetic sump plug could prevent a costly engine rebuild or prevent permanent damage to your engine.

• Thread Size: M12 x 12mm
• Thread Pitch: 1.25mm
• Colour: Black
• Pre-drilled hole in the head for use with safety wire
• Rubber o-ring & aluminium crush washer prevent leaks
• Anodised aluminium for a great look and durability

NOTE: All Aluminium Magnetic Drain Plugs should be tightened to the OEM specifications found in your owners/service manual.

Maximise your motorcycles engine cleaning system with Whites Magnetic Oil Drain Plugs, available for almost every make & model of motorcycle these anodised aluminium plugs include a magnetic core that is designed to catch any metal shavings in your motorcycles oil. Extra protection can't hurt, a simple inexpensive magnetic sump plug could prevent a costly engine rebuild or prevent permanent damage to your engine.

• Thread Size: M12 x 12mm
• Thread Pitch: 1.25mm
• Colour: Black
• Pre-drilled hole in the head for use with safety wire
• Aluminium crush washer prevent leaks
• Anodised aluminium for a great look and durability

NOTE: All Aluminium Magnetic Drain Plugs should be tightened to the OEM specifications found in your owners/service manual.

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

Extend the life of your fork seals and reduce stress on your fork springs with the Whites Fork Seal Savers. The seal saver prevents over compression of your front end by bridging the gap between your tyre and front mudguard, designed with a curved bottom to prevent damage to your tyre and tube and also gives a firmer hold for your tie downs. The seal savers also stop your forks compressing further while in travel, which can cause your tie downs to pop off and your beloved ride toppling over.

Curved mount matches tyre to prevent denting into the tyre and damaging your tube, tyre and rim
Prevents premature damage to your fork springs and seals from continuous compression
Stabilises bike and prevents tie downs popping off when on bumpy roads
Raised top reduces surface contact preventing damage to front mudguard
Crossbar holds seal saver in place when loading your ride
Plastic construction is lightweight and durable for easy transportation and extended life

Dimensions (mm): 293 x 231 x 98
Colour: Yellow

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

These sensors and switches monitor temperatures. If faulty, they either send signals to the machine's electrical "brain" which can activate a warning light, shut down that part of the system, or shut down the entire engine. Usually, these are located in the cylinder block, oil cooler, or in the cooling system.

Switches are set up per specific temperatures. Some turn on at a specific temp, and some turn off when the area being monitored by the switch reaches that temperature. At that point, the "brain" will activate or deactivate another device, such as a fan.

Don't leave home without this powerful and high-quality lithium Jump pack from Motobatt. Featuring quality plug connections to high- voltage clamp leads, ultra-reliable and sound connections.

1000A peak current will have your Vehicle or Motorcycle starting in seconds. This little beauty is a must-have for the trail or the road. It can be charged from a standard USB power outlet.

Features:

• Jump Start - 12V Vehicles (motorcycle or car).
• 5V/2.4A USB Output - Charges smartphones, tablets and more.
• LED Flashlight - 3 modes:
• Illumination
• Strobe
• SOS
• Built-in protection - For overcharging and over-discharging.
• Charge indicator - Quickly view charge levels.
• Automatic power On/Off - When not in use.
• Copper jumper clamps.
• Pump up your Tires - Built-in Air Compressor

Specification:

• Start Current: 500A.
• Peak Current: 1000A.
• Battery Capacity: 10000mAh.
• Dimensions: 245 x 100 x 46mm.
• Weight: 880g.
• Input: 5V/2A
• Output: 5V/2.4A x2 (device), 12V (vehicle jump start).
• Operation temperature: -20c to 60c
• Full charging time: 6 hours

Includes:

• 1x Jump Starter – Jump Starter / Personal Power Supply Unit
• 1x Built-in Air Compressor – With detachable Air Line
• 1x 3-into-1 USB Cable – Type-C, Micro USB, Lightning
• 1x Mini Jumper Clamps – Plugs into Micro-start for Jump Starting
• 1x USB-A to USB-C Charging Cable
• 1x Hard Case

About Motobatt

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery-related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE-like fit.

Whites Cable range is designed to meet and exceed OEM specifications and quality at affordable pricing. Including Throttle, Clutch, Brake (front, rear and hand) and Speedo cable for your common farming/trail machines.

Using a black vinyl housing and inner nylon sleeve for longer life and smooth operation the Whites Brake Cables are designed to be a long-life replacement for your worn and degraded OEM cable. Providing accurate and consistent braking in all conditions. Whites have a comprehensive range of Brake Cables for most common agricultural, off-road & road motorcycles.

• Meets and exceed OEM quality cables
• Black vinyl housing for cable protection
• Inner nylon sleeve provides smooth operation and a long life
• Designed to withstand the harsh life of motorcycling
• Provides consistently accurate braking

Whites extensive cable range specifically for agriculturally based motorcycles.

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Specifications:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.
• Constructed with brass bushing for maximum performance with smooth operation.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s ATVs and UTVs.

• 40% higher tensile strength than conventional CV boo material, suitable for the high joint angles of modern ATVs and UTVs.
• 50% more abrasion-resistant than conventional CV boot material to ensure a long life in harsh off-road environments.
• Rubber compound is tested to -40° F to ensure good performance and long life at low temperatures.
• Lithium-based Molybdenum Grease ensures good lubrication for long CV joint life. Easier to install than most OEM and aftermarket boots. Sold each. Does not require the use of a ""Banding Tool"".

Specifications:

• H: 80mm
• SD: 16mm
• LD: 60mm
• Shaft I.D.: 16
• CV Body I.D.: 60
• Length: 80

Kits include:

• Two stainless steel clamps that are designed to be tightened without the use of special tools.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

The Eurogrip Climber XC is a tyre for motocross, enduro and cross-country applications, designated for both leisure, training and competition.

Features:

• Optimised knob layout extends tyre’s service life.
• Tyre geometry boosts resistance to wear-and-tear.
• Symmetrical tread pattern allows reversing of tyre, creating fresh driving edge and great value.
• Road legal in Australia and New Zealand.
• E-marked.

K&N Powersports oil filters contain a modern synthetic filter media, designed for ultimate flow with less pressure drop, yet engineered for outstanding filtration. K&N Powersports 'spin-on' oil filters feature a heavy-duty metal can. Most of these have a 17 mm nut affixed onto the end that allows for easy removal. The 17mm nut is crossed-drilled so racers can safety wire the filter to their bike.

Features

• O/E replacement oil filters for most cars, trucks, SUVs, motorcycles, and ATVs
• 17mm exposed nut designed for easy oil filter removal.
• Heavy-duty construction for extreme conditions.
• Anti-drain back valve (where applicable) eliminates dry starts.

Specifications

• Styl e: Canister
• Filter Material: High Flow Premium Media
• Gasket Material: Nitrile Rubber
• Height: 71mm
• Outside Diameter: 68mm
• Thread Specification: 3/4 In. 16 UNF
• Removal Nut: Yes