Tools

The Whites Piston Pin Tool is an essential tool for removing and installing piston pins. Prevents damage to your piston and the pin. With a knurled aluminium handle, 9/16" hex head screw and three left-hand adapter nuts. Can be used on pistons sized 40 - 100mm (1-5/8" - 4") and pin sizes 12 - 25mm (1/2" - 1") including all single cylinder engines from 50cc to 600cc and all 2, 3 and 4-cylinder models.

Prevents damage to piston and pin
Knurled aluminium handle
9/16" hex head screw
Three left-hand adapter nuts
Compatible with piston sizes 40-100mm and pins sized 12-25mm

The Whites Swingarm Pivot Nut Tool is an essential tool for installation of the swingarm pivot insert, used for removing and replacing the lock nut on swingarm pivot shafts. Constructed with a 1/2" socket drive for easy use with ratchets and torque wrenches and a diameter of 50mm. Manufactured from heat treated steel for strength and durability.

For removing/installing swingarm pivot lock nut
1/2" square socket drive
50mm diameter
Manufactured from heat treated steel
Four 6mm wide grooves

The Whites Valve Stem Seal Install Tool Set provides three common sizes (4.0mm, 4.5mm, 5.0mm) for use on most modern street bikes and one additional 5.0mm specially designed for Suzuki Hayabusa and other Suzuki models that use the same seal. The set is constructed with anodized aluminium handles & stainless steel pilot shafts, all provided in a convenient durable case.

The Whites Tyre Valve Core Tool is an ideal tool when working on tyres and tubes. The tool quickly and easily removes the valve core from the tube releasing all air. Designed with a slotted end for valve core installation and removal and a tapered end for extraction of broken valve cores. Manufactured with a knurled handle for additional grip and a lightweight corrosion resistant aluminium construction.

Removes valve core quickly and easily
Knurled handle for grip
Lightweight aluminium construction
Tapered end for extraction of broken valve cores

The Whites Diaphragm Spring Tool is an essential tool for dismantling the clutch, it helps you to compress the spring diaphragm while removing the large circlip from around the inside of the basket. The tool prevents any damage to the circlip, clutch or cases and is compatible with Norton Commando models.

• Prevents damage to the clutch, spring and circlip
• Compresses spring diaphragm
• Compatible with Norton Commando models

Designed for removing the fork cap on your forks, making fork oil changes a breeze. The Whites Fork Cap Wrenchs are long-lasting and are the essential tool when performing fork maintenance.

• Wrench for removing the front fork cap
• Closed-end for easy operation
• Size: 32mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

The Whites Showa BPF Fork Cap Removal Tool is designed to remove and install 8-point 45mm fork caps found on 43mm Showa big piston forks. Constructed from lightweight aluminium the tool prevents marring and damage to your expensive fork caps, with a knurled edge for additional grip. The 17mm hex head enables use with a ratchet or torque wrench for quick and easy removal and accurate installation.

Compatible with 8-point 45mm for caps
Specially designed for 43mm Showa BPF forks
Aluminium construction prevents rounding the fork caps
Knurled edge provides additional grip when in use
17mm hex head for easy removal and accurate installation

The Acebikes BrakeFix is a clever device to lock the front brake for all types of motorbikes. The BrakeFix is wrapped around the brake lever and handlebar. It is easy to use, with a simple but secure click-to-lock system.

The Acebikes brake lever jammer BrakeFix is used to lock the front brake for any type of motorbike. It is easy to use, with a simple but secure click-to-lock system. BrakeFix is perfect for parking your bike on the road, especially on steep slopes or even mountain trails. The clever and durable construction ensures that, once fitted, your bike will be safe on any surface. BrakeFix is also ideal for transporting your bike on a trailer or in a van.

Features:

• Durable and extremely rigid material.
• Lightweight.
• Click to lock system.
• Suitable for every motorcycle.
• Adjustable into different positions.

The Whites ATV Pinion Bearing Nut Tool is a necessary item for removing the pinion gear bearing lock nut on the rear differential of Honda ATVs. Manufactured from cold rolled carbon steel for exceptional strength and durability. Constructed with a knurled finish for a better grip when operating by hand and a 1/2" square socket drive for use with a ratchet or torque wrench for accurate installation.

Removes/installs pinion bearing nut
Compatible with TRX Honda ATVs
1/2" square socket drive for use with torque wrenches
Cold rolled carbon steel construction
Knurled finish for better grip

The Whites Sock Compression Adjuster Removal Tool allows easy removal of the rear shock compression adjuster.

Note: The punch marks at the threads must be drilled 1mm deep prior to removal.

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 35/36mm

Available in sizes 32mm-54mm.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M24 x 1.0
Thread Direction: Right Hand
Type: Female (Internal Thread)

The Whites Oil Filter Wrench Cup features a precision-stamped, deep reach cap-style that is engineered for a perfect fit. Constructed with 14 flutes and a 67mm diameter, along with a 3/8" square socket drive for use with a torque wrench or breaker bar. The heavy-duty steel manufacturing provides strength and durability while the black oxide finish prevents rust and corrosion.

Easily and safely removes hard to reach oil filters
Precisely engineered for strength and durability
Prevents crushing or damage to the oil filter
Removes stubborn oil filters with ease
Steel construction
Black oxide finish for corrosion resistance
3/8" square socket drive
67mm diameter with a 14 flute design

Designed for removing the fork cap on your forks, making fork oil changes a breeze. The Whites Fork Cap Wrenchs are long-lasting and are the essential tool when performing fork maintenance.

• Wrench for removing the front fork cap
• Closed-end for easy operation
• Size: 30mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

The perfect kit for installation of hand guards on off-road bikes and bar end weights on sports bikes. The Whites Grip Cutter Kit includes one 6" extension handle, two 1" cutting shoes and two 7/8" cutting shoes. The heat treated cutting shoes with bevelled edges ensure a clean cut every time with a knurled handle that provides a sure grip. Manufactured from Chromoly for exceptional durability and longevity.

Provides a clean cut
Great for road and off-road bikes
1" and 7/8" cutting shoes included for different sized bars
Perfect when installing hand guards or bar ends

The Whites Valve Adjustment tool is the perfect tool for adjusting your valves on many Honda, Suzuki, Moto Guzzi and Yamaha models. Constructed with square holes on both sides, an edge length of 3mm and 4mm and a total tool length of 110mm.

Compatible with many Honda, Yamaha, Suzuki and Moto Guzzi models
The perfect tool for valve adjustment
Squares with 3mm and 4mm edge length
Length: 110mm

MotoPressor Tyre Gauge now comes standard with two chucks. A straight chuck for "easy to get at" valve stems PLUS a 45° chuck for those "not so easy to get at" valve stems.

We all know what a pain Petrol Station gauges are. Most are woefully inaccurate and impossible to get onto a motorcycle valve stem. To use the MotoPressor Tyre Gauge with Petrol Station gauge, simply attach the MotoPressor Tyre Gauge to your valve stem, attach the petrol station chuck to the inline fitting on the gauge and get an instant and accurate reading in PSI or KPA.

No need to switch between the gauge and air compressor hose! Added a little too much air to your tyre? Simply press the air bleed button and adjust to your desired pressure.

NOTE: When swapping out the chuck, use plumbers tape on the hose thread. Wrap the thread, in a clockwise direction with 3 - 5 wraps of plumbers tape. Screw on the new chuck and tighten. Failure to follow these instructions will result in air leaks.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: 4M2 x 1.5
Thread Direction: Right Hand
Type: Female (Internal Thread)

The Whites Nitrogen Needle Kit is used to fill shocks with self-sealing type rubber valve.

The Whites Clutch Bleeding Tool is an ideal tool for servicing your hydraulic clutch. The easiest and most effective method of bleeding the clutch is the reverse bleed, as air rises it's more efficient to push new oil up forcing air bubbles upward. This tool connects to the bottom of the system and forces fluid out the master cylinder. Simply remove the old fluid from the cylinder as you go and you'll be done in no time.

Ideal tool for reverse bleeding hydraulic clutch
Forces air out the top of the clutch line
Makes clutch bleeding a one man job

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat-treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat-treated for strength and durability
Durable hot black oxide finish
Lubricate all areas before use

Thread Size: 35mm x 1.0
Thread Direction: Right Hand
Type: Female (Internal Thread)

Be ready for any repair with this adventure motorcycle tool kit.

Kit includes:

• Spark Plug Removal Tool – 3/8" x 16mm
• Spark Plug Removal Tool – 3/8" x 14mm
• 1/4" Bits (10pcs): T8, T10, T15, T20, T25, T27, T30, T40, T45, T50
• 1/4" Bits (12pcs): H1.5, H2, H2.5, H3, H4, H5, H5.5, H6, H7, H8, H10, PH2
• 1/4" T-Handle Extension
• Double Open End Wrench – 8mm / 10mm
• Double Open End Wrench – 13mm / 15mm
• Double Open End Wrench – 14mm / 17mm
• 3/8" Ratchet Handle
• 3/8" Socket Set (9pcs): 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm
• 3/8" Socket Holder
• 3/8" Socket Extension – 3"
• Vice Grips
• Cable Ties (10pcs)
• Spark Plug Gap Tool
• Electrical Tape – 5m
• Safety Wire – 2m
• Tyre Pressure Gauge

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 48mm

Available in sizes 32mm-54mm.

OHLINS STYLE FORK CAP TOOL

The Whites Ohlins Fork Cap Tool is designed to fit most Ohlins suspension models and is the ideal tool for removing and installing the fork cap. Constructed with a rubber cushion that prevents damage to the fork cap while in use and a 1/2" socket drive for use. Manufactured from lightweight and durable 7075-T6 aluminium.

Features:

• Removes and installs fork cap on most Ohlins forks
• Rubber cushion prevents damage to fork cap
• 1/2" socket drive for use with a torque wrench
• Constructed from 7075-T6 aluminium

Dimensions:

• Internal diameter: 27.6mm
• Pin height: 3.5mm
• Pin pattern diameter: 39mm from pin to opposite pin, on centres.

Includes ratchets, sockets, wrenches, extensions, pliers, hex and Torx keys, spoke wrench, chain breaker, tyre tools, spark plug tools, digital tyre gauge, and more.

Designed for workshop, racetrack, or home garage repair and maintenance, this set has the essentials covered with durable, pro-grade tools.

Kit includes:

• 3/8" ratchet – 24 teeth
• 1/4" ratchet – 24 teeth
• 6-point sockets – 1/4": 4, 6, 8, 10mm
• 6-point sockets – 3/8": 12, 13, 14, 17, 19, 21mm
• 6-point sockets – 1/2": 22, 24, 27, 30, 32mm
• Thin-wall spark plug sockets – 3/8" drive: 16mm, 21mm
• Adapter – 3/8" to 1/4" drive
• Adapter – 3/8" to 1/2" drive
• 1/4" extensions: 2", 4", 6"
• 3/8" extensions: 3", 6"
• Sliding T-handle – 1/4"
• Sliding T-handle – 3/8"
• Breaker bar – 1/2" drive, 15" length
• Combination wrench set: 6, 7, 8, 10, 12, 13, 14, 17, 18, 19, 21, 22, 24, 27mm
• Hex key ball-end set: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
• Torx key set: T10, T15, T20, T25, T27, T30, T40, T45, T50
• Digital tire gauge – 5–250 psi (2× AAA batteries not included)
• 3/8" drive hex axle tool: 17, 19, 22, 24mm
• Valve core removal tool
• Valve cores (pack of 4)
• Motorcycle bead tool
• Tire spoons – 10" (x2)
• Curved tire iron – 15"
• Exhaust spring removal tool
• Dead-blow hammer – 16 oz
• Needle nose pliers – 6"
• Side-cut pliers – 6"
• Bit holder and bits:
  • PH1 (x2), PH2 (x2), PH3 (x2)
  • SL3.5 (x2), SL4.5 (x2), SL5.5 (x2), SL6.5 (x2)
  • T10, T15, T20, T25, T27, T30
• 1/4" hex bits: H2, H2.5, H3, H4, H5, H6
• 3/8" hex bits: H6, H8, H10, H14
• 1/4" Torx bits: T15, T20, T25, T27, T30
• 3/8" Torx bits: T40, T45, T50, T55
• Spoke wrench with interchangeable heads: 5, 5.6, 6, 6.2, 6.3, 6.5, 6.7, 6.8mm
• Spark plug gap tool
• Feeler gauge set – 0.03–1.00mm
• Heavy-duty chain breaker tool
• 3-piece pick set: curved hook 135°, 45°, 90°

A great auxiliary tool for tyre irons when replacing off-road tyres and a must when installing tubes. Provides an easy way to push the tyre bead down into the drop centre of the rim on off-road wheels while using tyre irons to change the tyre. Slip the slot of the tool over the spoke and push bead down on opposite side of the tyre from your tyre irons. It will facilitate pulling the tyre over the edge of the rim allowing for easier and faster tyre removal and installation. No more fighting to keep the bead down while installing off-road tyres.

Constructed from 304 stainless steel
Pushes bead down allowing for quick and easy tyre installation
Groove hooks onto spoke to prevent tool popping out
Compatible with most common off-road rim/tyre sizes

The Oxford Air Gauge gives a digital reading of your tyre pressure and is quick and easy to use.

Features:

• Reads a choice of pressure scales: PSI/BAR/kPa/KG/CM2.
• Digital readings.
• Automatic shut-off.
• Fits Schrader valves.
• Pressure range: 0 to 6.9 BAR. 0 to 100 PSI. 0 to 690 Kpa.
• Includes 4 x valve caps.
• 1 x CR2032 (3V) battery.

The Whites Bearing Puller Set is perfect for any workshop or home garage. The set is constructed from alloy steel for strength and durability and includes three bearing removers for diverse applications. The Whites Bearing Puller Set provides the most convenient way to remove bearings.

Includes R51, R48 and R44 removers
Alloy steel construction
Case included for manageable storage
Most convenient method for removing bearings
Ideal for workshop or home mechanics