Whites

The Whites Swing Arm Kit includes all bearings, seals, shafts, bushings and thrust bearings to completely replace and repair your swingarm bearings. All bearing shafts are constructed from hardened 52100 bearing steel while all steel spacers are case-hardened and plated for durability and corrosion resistance.

• Complete OEM replacement bearing kit
• Bearing shafts are constructed from hardened 52100 bearing steel
• Steel spacers are case-hardened and plated
• Includes all components for complete replacement

One of the easiest bolt-on upgrades you can make to your forks, allowing you to bleed the air pressure from your forks without tools. Bleeding the air reduces the harshness of your forks caused by pressure build up. Constructed with a durable stainless steel body and an anodised 6061 T6 aluminium top. Relieving excess pressure increases the life of your fork seals, saving on costly repairs.

Easy to install, simply replace the OE bleeder
Reduces harshness caused by air build-up
Allows bleeding of air pressure without tools
One of the easiest bolt-on upgrades you can make to your forks
Compact design
Two bleeder valves for both left and right fork are included
Stainless steel body is durable and resists corrosion
Size: M5 x 0.8
Colour: Blue

Motorcycles, ATV's and UTV's are used in some of the harshest environments, dust filled air, mud and rain are all ideal environments for mechanical failure. The fuel filter is the fuel systems defence against contamination, from dirt and dust or particles in pump gas, over time your fuel filter will clog as it filtrates your fuel restricing flow and causing your fuel pump to work under additional stress which can cause premature failure. Replacing your fuel filter is inexpensive preventative maintenance which improves fuel quality, fuel flow and increases the life of your fuel pump. It is recommended to replace the fuel filter every 6-12 months dependent on application and usage.

Increases fuel flow
Improves fuel quality in engine
Reduces stress on fuel pump
Inexpensive preventative maintenance
OEM replacement
Built to meet and exceed OEM specifications

If you're restoring that classic ride to its former glory or manufacturing a custom masterpiece Whites Rear Shocks are perfect for the job. In a range of different chrome plating and black powder coating combinations, we have the right shock for the job. The progressive rate spring provides bottoming resistance with improved damping for an extra comfortable ride.

Steel construction shock body
Multi-stage velocity-sensitive hydraulic dampers
Progressive rate spring provides bottoming resistance
Upgraded damping provides an extra comfortable ride
Shocks are measured fully extended from eyelet to eyelet centre
Multi-position adjustable
Sold as a pair

Spring Colour: Chrome Plating
Absorber/Body Colour: Black Powdercoat
Cap Colour: Black Powdercoat
Top Mount: Bushing
Bottom Mount: Bushing
Length: 365mm

We have been stocking these aftermarket shocks for many years without issue, however, they are supplied without warranty - as the final use and application are beyond our control and they may exceed the products' design limits.

If you're restoring that classic ride to its former glory or manufacturing a custom masterpiece, Whites Rear Shocks are perfect for the job.

Available in a range of different chrome plating and black powder-coating combinations (depending on fitment model), we have the right shock for the job. The progressive rate spring provides bottoming resistance with improved damping for an extra comfortable ride.

Features:

• Steel construction shock body.
• Multi-stage velocity-sensitive hydraulic dampers.
• Progressive rate spring provides bottoming resistance.
• Upgraded damping provides an extra comfortable ride.
• Shocks are measured fully extended from eyelet to eyelet on centres.
• Multi-position adjustable.
• Kit is supplied with three bushing sizes to ensure best fit.
• Sold as a pair.

Specifications:

• Spring Colour: Chrome Plating
• Absorber/Body Colour: Black Powdercoat
• Cap Colour: Black Powdercoat
• Top Mount: Bushing
• Bottom Mount: Bushing
• Eyelet internal diameter: 25.4mm (1")
• Kit is supplied with three bushing sizes to ensure best fit:
  • 9.4mm (3/8")
  • 11.4mm (7/16")
  • 13.4 mm (17/32")
• Length: 365mm

Note: We have been stocking these aftermarket shocks without issue for many years. However, they are supplied without warranty, as the final use and application are beyond our control and they may exceed the products' design limits.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Whites lighting range is a collection of high-quality indicators (flashers), tail lamps, headlights and more. Available as direct OEM replacements and universal fitments for those one-off custom rides. Offered in a range of shapes, sizes, styles and mounting options Whites are here for your motorcycle lighting solutions.

Whites Universal fitting flashers are a great alternative to pricey and boring OEM indicators. Perfect for those one-off custom rides or additional style for your off the showroom floor ride. Built to high-quality specifications with durable construction for long-lasting life.

• Universal fitment
• E-Marked
• Sold as a pair
• Great OEM replacement
• Ideal for one-off custom machines
• Carbon styled finish
• Shape: Diamond
• Colour: Carbon
• Ligh t Type: LED

The new multi-density grips feature large soft diamonds to provide ultimate feel, comfort and grip.

The cushioning material is strategically placed along the shaft of the grip in the form of squishy diamonds. The additional cushioning offers excellent dampening against vibration and hand fatigue.

The multi-diamond design is one of the most popular MX grips styles. Why? Because the unique traction pattern of both large and small soft gel-like diamonds maximizes comfort and grip, thus improving feel and reducing rider fatigue.

Features:

• Dual-compound design for increased durability.
• Gel tack surface designed to offer exceptional grip.
• Diamond design helps reduce hand and arm fatigue and blisters.
• Full large and small diamond pattern.

The Whites Grip Donuts are designed to prevent blisters on the inside of your thumb and index finger while providing additional grip.

Prevents blisters on thumb and index finger
Available in Black, Blue, Green, Orange & Red

The Whites Grip Donuts are designed to prevent blisters on the inside of your thumb and index finger while providing additional grip.

Prevents blisters on thumb and index finger.

The Whites Inner Cable Bowden is a high-strength and durable inner cable, galvanised for corrosion and weather resistance. Supplied in a 25ft roll perfect for workshop use when creating custom length cables or replacing classic OEM cables that are no longer available.

Available in three different diameters, all in a 25ft roll, we have the ideal inner cable for you.

Features:

• Smooth operation.
• Ideal for custom cables.
• Diameter: 5mm
• Length: 25ft

WHITES REPLACEMENT BRAKE SHOES

• OE quality replacement brake shoes
• Edge trimmed and radius ground to ensure these brake shoes fit exactly into the drum
• Linings are bonded and chamfered on the ends
• Made from high-pressure die-cast aluminium

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Whites OEM replacement air filters are manufactured to meet or exceed OEM specifications. Constructed to fit the factory air box and are direct replacements to OEM air filters. The premium filtering media prevents dirt and dust entering your engine while maintaining excellent air flow. Whites Air Filters are designed for high-performance engines requiring great airflow and filtration.

Features:

• OEM replacement air filter.
• Meets or exceeds OEM specifications.
• Fits factory air box.
• Excellent airflow.
• Premium filtration.

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

The Whites Clutch Fibre Kit is the easiest and best replacement for your clutch. The kit has complete compatibility with your OEM clutch components. The Whites Clutch Fibre Kit comes as a complete set made from quality friction and base materials that maintain your OEM stack height to ensure minimal slippage, great power transfer, an excellent clutch feel, and hours of proper clutch operation.

Features:

• Made to OEM specifications to offer maximum performance and durability.
• Complete set of fibre friction plates.
• Set of replacement friction plates for your motorcycle or ATV.
• Reduces slip, fade, and poor lever feel.

Note: Actual kit pictured.

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Whites Cable range is designed to meet and exceed OEM specifications and quality at affordable pricing. Including Throttle, Clutch, Brake (front, rear and hand) and Speedo cable for various motorcycle applications.

Using a black vinyl housing and inner nylon sleeve for longer life and smooth operation the Whites Clutch Cables are designed to be a long-life replacement for your worn and degraded OEM cable. We have a comprehensive range of Clutch Cables for your agricultural, off-road or road motorcycle.

• Meets and exceed OEM quality cables
• Black vinyl housing for cable protection
• Inner nylon sleeve provides smooth operation and a long life
• Designed to withstand the harsh life of a motorcycle

Trusted by riders and dealers in the automotive market, the Whites CV Axle proves its durability against the industry's top manufacturers. With oversized outer joints accommodating up to a 45° swing angle, it enhances suspension travel and robustness. Through the latest CNC manufacturing technologies, the inner joints allow up to 45° of movement. Enhanced by high-strength TPE boots, OTK clamps, and moly grease, it delivers optimal performance in harsh conditions, significantly extending axle lifespan.

• Up to 45° swing angle.
• Up to 45° travel on inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Please refer to our online fitment guide for regular additions to the range and specific fit for your model.

A high-quality XR-type headlight.

• Contains 1 x 12V 25/25W Bulb
• High Beam / Low Beam functionality
• Height: 90mm
• Width: 130mm

Replace that old burnt out or lost relay with Whites range of Flasher Relays, available in several different fitting options along with universal fitments in varying voltage, shapes and pin styles. Use this relay if you are running LED turn signals. It will also work with stock filament type turn signals.

Features:

• Works great with applications that have dual filament turn signals.
• Lasts up to 10 times longer than thermal flashers.
• Required for use with LED turn signals.
• Universal fitment for a range of applications.
• Voltage: 12V
• Type: 2 Pin

If you've broken your mirrors, don't panic. We have you sorted with the range of OEM-styled Whites Mirrors. A stylish and unique bar-end mount design adds style to your ride. Sold individually to reduce cost when only requiring the replacement of one mirror. Built to meet and exceed OEM specifications at a fraction of the price, making the Whites Mirrors the perfect cost-effective replacement for your original mirrors. Available for most makes and models, we recommend using the fitment search to find mirrors for your bike.

Features:

• OEM replacement part.
• Bar end mount.
• Square mirror design.
• Competitive pricing.
• Sold individually.
• Fits 7/8 handlebars.
• Colour: Chrome

The perfect kit for installation of hand guards on off-road bikes and bar end weights on sports bikes. The Whites Grip Cutter Kit includes one 6" extension handle, two 1" cutting shoes and two 7/8" cutting shoes. The heat treated cutting shoes with bevelled edges ensure a clean cut every time with a knurled handle that provides a sure grip. Manufactured from Chromoly for exceptional durability and longevity.

Provides a clean cut
Great for road and off-road bikes
1" and 7/8" cutting shoes included for different sized bars
Perfect when installing hand guards or bar ends

Including a CV boot constructed from high-quality rubber, two stainless steel clamps and grease, the Whites ATV CV Boot is the ideal cost-effective alternative kit to OEM parts. Equipped with abrasion and puncture-resistant rubber, the Whites ATV CV Boot is designed to operate in harsh farming environments.

Features:

• High-quality abrasion-resistant rubber.
• OEM replacement.
• Easy to install.
• Puncture-resistant.

Specifications:

• H: 90mm
• SD: 21mm
• LD: 73.5mm

Kit Includes:

• 1 ATV CV boot
• 2 stainless steel clamps
• Bottle of grease

Whites' complete range of workshop hardware is a must for all workshops. Everything from washers, screws, split pins, nuts, bolts and more! The ideal spares to have at the ready for all maintenance, replacement and upgrades for your Japanese rides.

Features:

• Constructed from zinc coated steel, giving a shiny new finish and corrosion resistance ensuring a long product life.
• Japanese made.
• Metric.
• Matches Original Equipment quality.
• Hardware Type: Flange nut.
• Thread Size: 5mm
• Head size: 8mm
• Quantity: 50

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.

Built to outlast and outperform OEM seals, the Whites Oil & Dust Seals are a high-quality and cost-effective alternative to OEM replacement parts. Constructed with a dual-lip design that reduces friction and ensures better sealing, improving the life of the seal. Manufactured to strict factory specifications.

• High-quality OEM replacement
• Dual-lip design reduces friction and ensures better sealing
• Manufactured to factory specifications

Constructed from cold rolled steel and precision bent using CNC pullback and finished with a stylish chrome plating. The Whites Handlebars are perfect for bringing some new life to your ride, or for that one off custom project your resurrecting. Non knurled with no dimples or drilling for a consistent sleek look and included bar end caps that stop dirt and moisture build up providing corrosion resistance.

Cold rolled steel construction
No dimples or drilling
Non knurled
Chrome plating finish
Classic bend

Bar Diameter: 7/8"
Width: 29.5" (750mm)
Rise: 4.5" (115mm)
Pullback: 9.5" (240mm)
Centre Width: 5" (130mm)

The Whites OEM replacement cast brake perch provides an economical alternative to original levers. The perfect replacement for when your perch has broken or thread stripped. In an OEM long lever design to improve feel and braking.

Features:

• Direct OEM replacement cast perch.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Includes perch.
• Made from die-cast aluminium for maximum durability and affordability.

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.