Whites

Trusted by riders and dealers in the automotive market, the Whites CV Axle proves its durability against the industry's top manufacturers. With oversized outer joints accommodating up to a 45° swing angle, it enhances suspension travel and robustness. Through the latest CNC manufacturing technologies, the inner joints allow up to 45° of movement. Enhanced by high-strength TPE boots, OTK clamps, and moly grease, it delivers optimal performance in harsh conditions, significantly extending axle lifespan.

• Up to 45° swing angle.
• Up to 45° travel on inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Please refer to our online fitment guide for regular additions to the range and specific fit for your model.

The Whites 4-in1 Hex Axle Tool is compatible with most late model sport and off-road motorcycles. The tool includes 17mm, 19mm, 22mm and 24mm sizes for quick and easy removal or installation of the axle. Constructed with a 3/8" drive recess on both ends for use with ratchets and torque wrenches. Manufactured from heat treated chromoly steel for exceptional durability and enabling the ends to handle up to 150 foot-pounds of torque.

3/8" socket drive on both ends
Heat treated Chromoly steel construction
17mm, 19mm, 22mm and 24mm hex sizes
Capable of torquing to 150 foot-pounds
Black oxide finish

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

An extra-wide 57mm body improves comfort and control of your bike, while the open design reduces mud build-up. You can be assured that you will remain planted on the bike under the heaviest of braking and in the muddiest of conditions.

• Meets and exceed OEM quality
• OEM look in an extra-wide design
• Open design improves mud clearance

Pin for the Whites Bike Stand.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model-dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Specifications

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminium for maximum durability and affordability.
• Constructed with brass bushing for maximum performance with smooth operation.

NOTE: RIGHT RADIATOR ONLY, FOR LEFT SEE WPRAD154L FOR PAIR SEE WPRAD154P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminium for maximum durability and affordability.

PAIR

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

- Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machines top performance
- Utilizes stock mounting hardware (not included) for a great fit
- Hand-welded aluminium design for a great look and functionality
- Includes a new radiator cap

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites Brake Calipers are designed to withstand harsh and extreme off-road environments and are the perfect cost-effective alternative to replacing your OEM brake calipers.

Including pre-fitted brake pads, mounting bracket, banjo bolt and crush washers, the caliper is ready to install on arrival. Whites Calipers are model and position-specific — we recommend using our fitment finder to find the correct caliper for your model.

Whites Brake Caliper also produces for one of the world's leading and most recognised OEM calliper names. Quality is assured when you buy Whites brand calipers.

Features:

• OEM replacement
• Built to endure harsh riding environments
• Includes banjo bolt and two crush washers
• Includes pre-fitted brake pads
• Includes removable brake pins
• Cost-effective OEM alternative

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M28 x 1.0
Thread Direction: Right Hand
Type: Female (Internal Thread)

Pre-made to specified lengths the Whites Brake Lines are the perfect OEM replacement to your old and used brakelines, or the perfect upgrade to that performance machine. Road legal, complying to FMVSS106 and fully WOF/VIN compliant. Steel braided for the best braking feel and performance.

Road Legal - Comply to FMVSS106 and are WOF/ VIN Compliant
Improve Braking Feel and Performance
Steel braided
Available in Dark Smoke and Clear Chrome
Sizes 150mm-1500mm in 50mm increments
Used by NZSBK Champion Andrew Stroud

Size: 1350mm
Colour: Clear Chrome

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

The Whites Carburetor Float Level Gauge is the perfect tool for measuring float level height between the float and carburetor gasket surface. The tool has an adjustable width of 16-78mm to fit most carburetors and can measure a float height of up to 40mm. The steel construction provides strength and durability ensuring a long life. It is important to keep the correct amount of fuel in your float bowl, too high and your bike can run rich, too low and your bike runs lean.

Helps set accurate float level height
Measures heights up to 40mm
16-78mm adjustable width suits most carburetors
Steel construction for strength and durability

The Whites Velocity Stacks allow smooth and even entry of air at high velocities into the intake of your ride improving throttle response, increasing power and smoothing out your power delivery. The velocity stacks are constructed from lightweight corrosion-resistant aluminium. Universal fitment 35mm inside diameter. A micro-mesh screen prevents unwanted dirt and debris entering your engine while the included hose clamp allows for a quick and easy installation.

Aluminium construction
Universal fitment
Improves throttle response
Increases power
Smooths power delivery
Micro mesh screen protects the engine
Included hose clamp for mounting
Inside Diameter: 35mm

Available for a limited time, while stocks last.

Quality ATV Steel Rim from Whites.

Specifications:

• Will suit front fitment for Honda models — confirm suitability for model prior to purchase.
• Rim Size: 12"
• PCD: 4/110mm
• Offset: +41mm
• Colour: Satin
• Load rating (per rim): 408kg

Whites lighting range is a collection of high-quality indicators (flashers), tail lamps, headlights and more. Available as direct OEM replacements and universal fitments for those one-off custom rides. Offered in a range of shapes, sizes, styles and mounting options Whites are here for your motorcycle lighting solutions.

Whites Universal flashers are a great alternative to pricey and boring OEM indicators. Perfect for those one-off custom rides or additional style for your off the showroom floor ride.

Universal fitment
Great OEM replacement
Ideal for one-off custom machines

Shape: Diamond
Colour: Chrome
Light Type: Bulb
Fitment Location: Left and Right

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. They offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap-side radiators will include a new radiator cap.

Exceptional cooling and maximum flow efficiency to ensure your machine's top performance.

Features:

• Utilizes stock mounting hardware (not included) for a great fit.
• Hand-welded aluminium design for a great look and functionality.
• Includes a new radiator cap.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Whites OEM replacement air filters are manufactured to meet or exceed OEM specifications. Constructed to fit the factory air box and are direct replacements to OEM air filters. The premium filtering media prevents dirt and dust entering your engine while maintaining excellent air flow. Whites Air Filters are designed for high-performance engines requiring great airflow and filtration.

Features:

• OEM replacement air filter.
• Meets or exceeds OEM specifications.
• Fits factory air box.
• Excellent airflow.
• Premium filtration.

The Whites Swing Arm Kit includes all bearings, seals, shafts, bushings and thrust bearings to completely replace and repair your swingarm bearings. All bearing shafts are constructed from hardened 52100 bearing steel while all steel spacers are case-hardened and plated for durability and corrosion resistance.

• Complete OEM replacement bearing kit
• Bearing shafts are constructed from hardened 52100 bearing steel
• Steel spacers are case-hardened and plated
• Includes all components for complete replacement

The Whites Brake Calipers are designed to withstand harsh and extreme off-road environments and are the perfect cost-effective alternative to replacing your OEM brake calipers.

Including pre-fitted brake pads, mounting bracket, banjo bolt and crush washers, the caliper is ready to install on arrival. Whites Calipers are model and position-specific — we recommend using our fitment finder to find the correct caliper for your model.

Whites Brake Caliper also produces for one of the world's leading and most recognised OEM calliper names. Quality is assured when you buy Whites brand calipers.

Features:

• OEM replacement
• Built to endure harsh riding environments
• Includes banjo bolt and two crush washers
• Includes pre-fitted brake pads
• Includes removable brake pins
• Cost-effective OEM alternative

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Quality ATV Steel Rim from Whites.

Specifications:

• Will suit front fitment for CF-Moto models — confirm suitability for model prior to purchase.
• Rim Size: 14"
• PCD: 4/110mm
• Offset: +46.5mm
• Colour: Black
• Load rating (per rim) 408kg

Designed to push the tyre bead down into the drop centre of the rim without fighting while installing or repairing your off-road tyres/tubes. The nylon thumbscrew keeps rims from being scratched when in use. Constructed from 6000 series aluminium. It will facilitate pulling the tyre over the edge of the rim allowing for easier and faster tyre removal and installation. No more fighting to keep the bead down while installing off-road tyres.

Whites lighting range is a collection of high-quality indicators (flashers), tail lamps, headlights and more. Available as direct OEM replacements and universal fitments for those one-off custom rides. Offered in a range of shapes, sizes, styles and mounting options Whites are here for your motorcycle lighting solutions.

Whites Universal fitting flashers are a great alternative to pricey and boring OEM indicators. Perfect for those one-off custom rides or additional style for your off the showroom floor ride. Built to high-quality specifications with a durable construction for a long lasting life. So give that custom ride an extra cool look or replace those OEM broken or damaged mirrors with a unique touch. Sold as a pair to ensure a matching look and reducing cost.

Features:

• Universal fitment.
• Sold as a pair.
• Great OEM replacement.
• Ideal for one-off custom machines
• Shape: Square
• Colour: Carbon
• Light Type: Bulb
• Mount Type: Stud

Built to outlast and outperform OEM seals, the Whites Oil & Dust Seals are a high-quality and cost-effective alternative to OEM replacement parts. Constructed with a dual-lip design that reduces friction and ensures better sealing, improving the life of the seal. Manufactured to strict factory specifications.

• High-quality OEM replacement
• Dual-lip design reduces friction and ensures better sealing
• Manufactured to factory specifications

The Whites OEM replacement cast brake perch provide an economical alternative to original levers. The perfect replacement for when your perch has broken or thread stripped, compatible with your OEM lever and Whites replacement levers. Mounting hardware is included for a hassle-free and quick fix to your brake/clutch system.

Specifications:

• Direct OEM replacement cast perch.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Made from die-cast aluminium for maximum durability and affordability.
• Fits OEM levers and Whites replacement levers.
• Mounting hardware included.