Whites

Replace your old and worn ball joints with Whites range of Heavy-Duty Ball Joints, perfect as an upgrade to your OEM ball joints or a replacement for worn joints. Constructed with a heavy-duty steel outer housing and a premium bearing cup which keeps the ball end isolated from the outer housing, extending the life of the joint.

Features:

• Heavy-duty steel outer housing.
• Premium bearing cup.
• The ball end is isolated from the outer housing.
• Meets and exceeds OEM specifications.
• Extended life.

Note: Ball Joints are model specific, it is recommended that you use our fitments search to ensure correct fit.

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

This set includes the slide-hammer, crossbar tyre shaft and 8 different-sized collets. The Whites Blind Bearing and Bushing Puller is an essential tool for most transmission rebuilds and can also be used for wheel bearing removal. The crossbar shaft and collets allow quick and easy removal. Includes a convenient case for easy storage and accessibility.

• 2-pound slide hammer
• Crossbar type shaft allows easy collet removal
• A necessary tool for most transmission rebuilds
• Can also be used for wheel bearing removal
• 8mm, 10mm, 12mm, 15mm, 17mm, 20mm, 25mm and 30mm collets
• Case included

Whites Oil Filters are designed to trap harmful contaminants while still allowing a high oil flow rate.

Features:

• Designed for great filtration.
• Oil filter design provides for a high rate of oil flow.
• Filters available for almost all makes and models.

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

The Whites Clutch Fibre Kit is the easiest and best replacement for your clutch. The kit has complete compatibility with your OEM clutch components. The Whites Clutch Fibre Kit comes as a complete set made from quality friction and base materials that maintain your OEM stack height to ensure minimal slippage, great power transfer, an excellent clutch feel, and hours of proper clutch operation.

Features:

• Made to OEM specifications to offer maximum performance and durability.
• Complete set of fibre friction plates.
• Set of replacement friction plates for your motorcycle or ATV.
• Reduces slip, fade, and poor lever feel.

Note: Actual kit pictured.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Constructed from lightweight marine grade 6061 aluminium the Whites Alloy Tri-Fold Ramp is strong and durable while maintaining excellent corrosion resistance. The Tri-Fold nature allows the ramp to compact down to a manageable 715mm x 305mm and weighing only 5.1kg making it extremely easy to transport and store. Rubber-coated fingers protect your loading surface and help to prevent the stand from slipping.

Features:

• Marine grade 6061 aluminium construction.
• Rubber coated fingers protect loading surface.
• Both ends fold for easy storage during transport.
• Suitable for both Road and Off-Road motorcycles.
• Length: 1,985mm
• Width: 305mm
• Folded Length: 715mm
• Weight: 5.1kg
• Loading capacity: 270kg

NOTE: LEFT RADIATOR ONLY, FOR RIGHT SEE WPRAD059R FOR PAIR SEE WPRAD059P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

Don't lose your spark. Whites Sparks Plug Caps offer exceptional connection between high-tension leads and the spark plug. They are designed to reduce noise across all frequencies, ensuring engine performance isn't affected.

Features:

• Sufficient resistor length prevents internal flashover and maintains consistent resistance.
• Made with high-quality ceramic materials, resisting deterioration and offering minimal resistance variation under heavy loads.
• Plug connector constructed from tough phenolic resin, providing excellent heat resistance and withstanding high tension.
• Durable rubber material.
• Heat press insertion further strengthens the cap, making it highly resistant to vibration.
• Special rubber seals prevent moisture-caused electrical leakage.

Specifications:

• Pl ug Φ: 10-12mm
• For terminal type: Threaded
• Colour: Black
• Resistor: 5 kiloohms

Trusted by riders and dealers in the automotive market, the Whites CV Axle proves its durability against the industry's top manufacturers. With oversized outer joints accommodating up to a 45° swing angle, it enhances suspension travel and robustness. Through the latest CNC manufacturing technologies, the inner joints allow up to 45° of movement. Enhanced by high-strength TPE boots, OTK clamps, and moly grease, it delivers optimal performance in harsh conditions, significantly extending axle lifespan.

• Up to 45° swing angle.
• Up to 45° travel on inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Please refer to our online fitment guide for regular additions to the range and specific fit for your model.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Whites Kill Switches are high-quality OEM styled replacement kill switches. Including the bar mount and bolt, wire it up and you're ready to rip. The fully waterproof button and heavy-duty covered wire prevent water from entering and shorting the switch. OEM style, shape and plug ensures a quick and easy installation.

Features:

• OEM replacement.
• Quick and easy installation.
• Fully waterproof.
• OEM style, shape and plug.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Designed to meet or exceed OEM specifications, the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing.

Features:

• Premium high-speed bearings.
• Low drag.
• Double lip seals on both sides provide superior exclusion of water and dirt.
• Improved grease retention.

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB001
  • Outer: WPAXCVB010
• Please confirm suitability for your year, make, and model prior to purchase.

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

NB: Please confirm suitability for your year, make, model prior to purchase.

The Whites Clutch Fibre Kit is the easiest and best replacement for your clutch. The kit has complete compatibility with your OEM clutch components. The Whites Clutch Fibre Kit comes as a complete set made from quality friction and base materials that maintain your OEM stack height to ensure minimal slippage, great power transfer, an excellent clutch feel, and hours of proper clutch operation.

Features:

• Made to OEM specifications to offer maximum performance and durability.
• Complete set of fibre friction plates.
• Set of replacement friction plates for your motorcycle or ATV.
• Reduces slip, fade, and poor lever feel.

Note: Actual kit pictured.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites Brake Calipers are designed to withstand harsh and extreme off-road environments and are the perfect cost-effective alternative to replacing your OEM brake calipers.

Including pre-fitted brake pads, mounting bracket, banjo bolt and crush washers, the caliper is ready to install on arrival. Whites Calipers are model and position-specific — we recommend using our fitment finder to find the correct caliper for your model.

Whites Brake Caliper also produces for one of the world's leading and most recognised OEM calliper names. Quality is assured when you buy Whites brand calipers.

Features:

• OEM replacement
• Built to endure harsh riding environments
• Includes banjo bolt and two crush washers
• Includes pre-fitted brake pads
• Includes removable brake pins
• Cost-effective OEM alternative

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites Motocross Footpeg Covers are designed to keep mud and debris from clogging up the hinge on your footpegs, preventing the footpeg from returning to its resting position. The thick PVC construction is durable to prevent rips and the universal fit enables mounting with any bike and footpeg.

• Prevents mud and debris build-up
• Durable PVC construction
• Universal fitment

NOTE: RIGHT RADIATOR ONLY, FOR LEFT SEE WPRAD135L FOR PAIR SEE WPRAD135P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

EXHAUST MUFFLER CONNECTOR 38.3x44x24.9mm

Whites ATV Wheel Hubs are the ideal solution for tough use where reliability and strength are a must. Expertly made in compliance with stringent industry standards. Manufactured from exceptional materials using industry-leading equipment and processes.

Features:

• Made by experienced technicians using cutting-edge technology.
• Trusted for unbeatable quality and unsurpassed reliability.
• Made from top-grade materials to provide wear resistance.
• OEM replacement ensures a precise and reliable fit.

EXHAUST GASKET YAMAHA 32.00x40.50x3.0mm